Stock Portfolio Organizer

The ultimate porfolio management solution.

Shares, Margin, CFD's, Futures and Forex
EOD and Realtime
Dividends and Trust Distributions
And Much More ....
For Portfolio Manager Click Here

WiseTrader Toolbox

#1 Selling Amibroker Plugin featuring:

Advanced Adaptive Indicators
Advanced Pattern Exploration
Neural Networks
And Much More ....
Find Out More Here

All in One for Amibroker (AFL)
Nahid
over 13 years ago
Amibroker (AFL)

Rating:
2 / 5 (Votes 12)
Tags:
trading system, amibroker

All in one has Patterns Wave, MACD, Candle Details, Guppy Movement, Support-Resistance, BB, Pivot indicator.
One can easily determine the trend.

Screenshots

Similar Indicators / Formulas

weighted moving average scan
Submitted by naninn about 13 years ago
Kase Peak Osc. V2 batu
Submitted by batu1453 over 9 years ago
Kase CD V2batu
Submitted by batu1453 over 9 years ago
Ichimoku
Submitted by prashantrdx over 9 years ago
EMA System Ribbon
Submitted by yo123 about 13 years ago
Three-Bar Inside Bar Pattern
Submitted by EliStern about 13 years ago

Indicator / Formula

Copy & Paste Friendly
_SECTION_BEGIN("Patterns Wave"); 
Change = Param("Wave Period",6,0,100,1);
WaveLineColor = ParamColor("Wave Color", colorWhite );
procedure PlotShapeAt( x, y, shape, shift )
{
PlotShapes( IIf( BarIndex() == x, shape, 0 ), WaveLineColor, 0, y, shift );
}
WavePattern=ParamToggle("Wave","No|Yes",0);
if(WavePattern)
{
bi = BarIndex();
sbi = SelectedValue( bi );
GraphXSpace = 2;
Plot( Zig( C, Change ), "", WaveLineColor, ParamStyle("Wave Style", styleThick|styleNoLabel|styleNoTitle) );
upshift = 15;
if( SelectedValue( PeakBars( C, Change ) < TroughBars( C, Change ) ) )
{
pt1 = PeakBars( C, Change, 1 ) == 0 ;
pt2 = TroughBars( C, Change, 1 ) == 0 ;
}
else
{
pt1 = TroughBars( C, Change, 1 ) == 0 ;
pt2 = PeakBars( C, Change, 1 ) == 0 ;
upshift = -upshift;
}
bpt1 = SelectedValue( ValueWhen( pt1, bi ) );
bpt2 = SelectedValue( ValueWhen( pt2, bi ) );
bpt3 = SelectedValue( ValueWhen( pt1, bi, 2 ) );
bpt4 = SelectedValue( ValueWhen( pt2, bi, 2 ) );
bpt5 = SelectedValue( ValueWhen( pt1, bi, 3 ) );
bpt6 = SelectedValue( ValueWhen( pt2, bi, 3 ) );
PlotShapeAt( bpt1, C, shapeDigit5, upshift );
PlotShapeAt( bpt2, C, shapeDigit4, -upshift );
PlotShapeAt( bpt3, C, shapeDigit3, upshift );
PlotShapeAt( bpt4, C, shapeDigit2, -upshift );
PlotShapeAt( bpt5, C, shapeDigit1, upshift );
}
_SECTION_END(); 

_SECTION_BEGIN("MACD Fill"); 
// Parameters
PeriodEMA = 13;
MACDIndicatorRange = 50;
// Volume filter
VolumeFilter = Param( "Volume MA filter", 100000, 50000, 500000, 100000 );
Timeframe = Interval(2);
// Adjust for weekly if necessary
if( Timeframe == "5-day" || Timeframe == "Weekly" ) {
VolumeFilter = VolumeFilter * 5;
}
else if( Timeframe == "Monthly") {
VolumeFilter = VolumeFilter * 20;
}
else if( Timeframe != "Daily" ) {
VolumeFilter = 0;
}
// Minimum number of bars required to form a divergence pattern. For a
// positive divergence, this is the number of falling bars in the context
// of a rising MACD or MACD-H pattern. Vice versa for negative divergence
MACDDivMinWidth = Param("Divergence min width", 4, 1, 10, 1 ); 
// Minimum width of negative projecting wave between two positive MACD-H waves, 
// otherwise two positive waves will be considered as one single wave. This
// minimises invalid divergences, to ensure that "back of bears is broken".
// The same applies for a positive wave between two negative waves.
HistMinWidth = Param("Histogram min width", 4, 1, 10, 1 ); 
PeriodEMA = Optimize( "PeriodEMA ", 13, 5, 23, 1 );
// Other parameters
OpenPositions = 10;
ATRPeriod = 5;
InitialCapital = 100000;
PeriodFast = Param( "Fast EMA", 8, 2, 200, 1 );
PeriodSlow = Param( "Slow EMA", 17, 2, 200, 1 );
PeriodSignal = Param( "Signal EMA", 9, 2, 200, 1 );
MACDInd = MACD(PeriodFast, PeriodSlow );
SigInd = Signal(PeriodFast, PeriodSlow , PeriodSignal );
HistInd = MACDInd - SigInd ;
_N( macdStr = WriteVal( PeriodFast, 1.0 )+","+WriteVal( PeriodSlow , 1.0 ) );
_N( sigStr = macdStr + ","+WriteVal( PeriodSignal , 1.0 ) );

// Get displayed min and max value of MACD and MACD-H, to rescale it for better visibility
scMACDMax = LastValue(HHV(Max(MACDInd, sigInd), 
BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scMACDMin = LastValue(LLV(Min(MACDInd, sigInd), 
BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scaleMACD = Max( abs(scMACDMax), abs(scMACDMin) ); 
scHistMax = LastValue(HHV(HistInd, 
BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scHistMin = LastValue(LLV(HistInd, 
BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scaleHist = Max( abs(scHistMax), abs(scHistMin) ); 
_SECTION_END();


_SECTION_BEGIN("Candle Detail"); 
Candletype=ParamList("Candle Type","Candle|Haikin",1);
UpCandle = ParamColor("Up Color", colorBrightGreen );
DownCandle = ParamColor("Down Color", colorRed );
Consolidation = ParamColor("Consolidation", colorWhite );

MACDColorUp = ParamColor("MACD Up", colorDarkGreen );
MACDColorDown = ParamColor("MACD Down", colorDarkRed );
Prd1=Param("ATR Period",4,1,20,1);
Prd2=Param("Look Back",8,1,20,1);


if(Candletype=="Candle")
{
CandleColor = IIf(O > C, DownCandle, UpCandle);
Plot( Close, "Price", CandleColor, styleCandle ); 
}
else if(Candletype=="Haikin")
{
HaClose = (O+H+L+C)/4; 
HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); 
HaHigh = Max( H, Max( HaClose, HaOpen ) ); 
HaLow = Min( L, Min( HaClose, HaOpen ) );
HaClose = (O+H+L+C)/4; 
HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); 
HaHigh = Max( H, Max( HaClose, HaOpen ) ); 
HaLow = Min( L, Min( HaClose, HaOpen ) );

BrightGreen=HHV(LLV(L,Prd1)+ATR(Prd1),Prd2); 
BrightRed=LLV(HHV(H,Prd1)-ATR(Prd1),Prd2); 

xDiff = (HaHigh - Halow) * IIf(StrFind(Name(),"JPY"),100,10000);
barcolor = IIf(C>BrightGreen ,UpCandle,IIf(C < BrightRed,DownCandle,Consolidation)); 

SetBarFillColor( IIf(MACDInd >SigInd, MACDColorUp,MACDColorDown) ); 
PlotOHLC( HaOpen, HaHigh, HaLow, HaClose, "", barcolor, styleCandle );
}
_SECTION_END();

_SECTION_BEGIN("Guppy"); 
Guppy=ParamToggle("Guyyp","No|Yes",0);
if(Guppy)
{
Plot( EMA( C, 30 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) ); 
Plot( EMA( C, 35 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 40 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 45 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 50 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 55 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 60 ),"", ParamColor( "Color", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
}
_SECTION_END();

_SECTION_BEGIN("Support-Resistance");
SupRes=ParamToggle("Sup-Res","No|Yes",1);
SupResA = Param("Sup-Res A Period",20,0,100,1);
SupResB = Param("Sup-Res B Period",25,0,100,1);

Res1 = ParamColor("Resistance High", colorRed );
Res2 = ParamColor("Resistance Low", colorDarkRed );
Sup1 = ParamColor("Support High", colorDarkGreen );
Sup2 = ParamColor("Support Low", colorBrightGreen );
if(SupRes)
{
MaxGraph = 12;
BuyOffSet = SupResA;//Optimize("BuyOffSet",18,15,20,1);
SellOffset = BuyOffSet;//Optimize("SellOffset",2,2,14,2);
RegLength = 5;//Optimize("RegLength",5, 2,11,2);
BuyATRPeriod = 2;//Optimize("BuyATRPeriod",2,2,5,1);
SellATRPeriod = BuyATRPeriod;//Optimize("SellATRPeriod",4,2,11,2);
ATRMultiplier = 0.5;//Optimize("ATRMultiplier",1,0.7,1.25,.05);
SuppA = HHV(H-ATRMultiplier*ATR(BuyATRPeriod),BuyOffset); /* RED */
RessB = LLV(L+ATRMultiplier*ATR(SellATRPeriod),SellOffset); /* GREEN */
Plot(SuppA,"",sup1,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) );
Plot(RessB,"",res2,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) ); 

nn=SupResB;
mmm=100;
TYP=(High + Low + 2*Close)/4;
CI=(TYP-MA(TYP,14))/(0.015*StDev(TYP,14));
CCCI=EMA(CI,5)+mmm;
Hh=HHV(H,nn);
Ll=LLV(L,nn);
MM=(Hh+Ll)/2;
CCCC=EMA(CCCI*(Hh-Ll)/(2*mmm)+Ll,5);
Plot(Hh,"",Res1, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) );
Plot(Ll,"",Sup2, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) ) ;
}
_SECTION_END();

_SECTION_BEGIN("BB"); 
BBand=ParamToggle("B.Band","No|Yes",0);
if(BBand)
{
pr1=Param( "Period1",20,0,100,1);
pr2=Param( "Period2",2,0,100,1);
BBColor = ParamColor( "Band Color", colorGrey50 );
Cloud = ParamColor( "Cloud", colorDarkGrey );
Style = styleNoRescale | styleNoLabel |styleDashed;
BBT=BBandTop(C,pr1,pr2);
BBB=BBandBot(C,pr1,pr2);
topcond = (Cross(BBT,C)OR C>BBT)AND Ref(C, -1)> BBT;
botcond = ( Cross(C,BBB))AND Ref(C, -1 < BBB);
Plot( BBT, "BBTop" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) );
Plot( BBB, "BBBot" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) ); 
PlotOHLC( BBT,BBT,BBB,BBB, "", Cloud,styleCloud|styleNoLabel );
}
_SECTION_END();

_SECTION_BEGIN("Pivot");
nBars = Param("Number of bars", 12, 5, 40);
bShowTCZ = Param("Show TCZ", 1, 0, 1); 
nExploreBarIdx = 0;
nExploreDate = 0;
nCurDateNum = 0;
DN = DateNum();
DT = DateTime();
bTCZLong = False;
bTCZShort = False;
nAnchorPivIdx = 0;
ADX8 = ADX(8);
if(Status("action")==1) {
bDraw = True;
bUseLastVis = 1;
} else {
bDraw = False;
bUseLastVis = False;
bTrace = 1;
nExploreDate = Status("rangetodate");
for (i=LastValue(BarIndex());i>=0;i--) {
nCurDateNum = DN[i];
if (nCurDateNum == nExploreDate) {
nExploreBarIdx = i;
}
}
}
GraphXSpace=7;
if (bDraw) {
}
aHPivs = H - H;
aLPivs = L - L;
aHPivHighs = H - H;
aLPivLows = L - L;
aHPivIdxs = H - H;
aLPivIdxs = L - L;
aAddedHPivs = H - H;
aAddedLPivs = L - L;
aLegVol = H - H;
aRetrcVol = H - H;
nHPivs = 0;
nLPivs = 0;
lastHPIdx = 0;
lastLPIdx = 0;
lastHPH = 0;
lastLPL = 0;
curPivBarIdx = 0;
aHHVBars = HHVBars(H, nBars);
aLLVBars = LLVBars(L, nBars);
aHHV = HHV(H, nBars);
aLLV = LLV(L, nBars);
nLastVisBar = LastValue(
Highest(IIf(Status("barvisible"), BarIndex(), 0)));
curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar, 
IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx,
LastValue(BarIndex())));
curTrend = "";
if (aLLVBars[curBar] < aHHVBars[curBar]) 
curTrend = "D";
else 
curTrend = "U";
if (curBar >= 120) {
for (i=0; i<120; i++) { 
curBar = IIf(nlastVisBar > 0 AND bUseLastVis, 
nlastVisBar-i, 
IIf(Status("action")==4 AND nExploreBarIdx > 0, 
nExploreBarIdx-i,
LastValue(BarIndex())-i));
if (aLLVBars[curBar] < aHHVBars[curBar]) {
if (curTrend == "U") {
curTrend = "D";
curPivBarIdx = curBar - aLLVBars[curBar];
aLPivs[curPivBarIdx] = 1;
aLPivLows[nLPivs] = L[curPivBarIdx];
aLPivIdxs[nLPivs] = curPivBarIdx;
nLPivs++;
}
} else {
if (curTrend == "D") {
curTrend = "U";
curPivBarIdx = curBar - aHHVBars[curBar];
aHPivs[curPivBarIdx] = 1;
aHPivHighs[nHPivs] = H[curPivBarIdx];
aHPivIdxs[nHPivs] = curPivBarIdx;
nHPivs++;
}
} 
} 
}
curBar = 
IIf(nlastVisBar > 0 AND bUseLastVis, 
nlastVisBar, 
IIf(Status("action")==4 AND nExploreBarIdx > 0, 
nExploreBarIdx,
LastValue(BarIndex()))
);
if (nHPivs >= 2 AND nLPivs >= 2) {
lastLPIdx = aLPivIdxs[0];
lastLPL = aLPivLows[0];
lastHPIdx = aHPivIdxs[0];
lastHPH = aHPivHighs[0];
nLastHOrLPivIdx = Max(lastLPIdx, lastHPIdx);
nAddPivsRng = curBar - nLastHOrLPivIdx;
aLLVAfterLastPiv = LLV(L, nAddPivsRng); 
nLLVAfterLastPiv = aLLVAfterLastPiv[curBar];
aLLVIdxAfterLastPiv = LLVBars(L, nAddPivsRng); 
nLLVIdxAfterLastPiv = curBar - aLLVIdxAfterLastPiv[curBar];
aHHVAfterLastPiv = HHV(H, nAddPivsRng); 
nHHVAfterLastPiv = aHHVAfterLastPiv[curBar];
aHHVIdxAfterLastPiv = HHVBars(H, nAddPivsRng); 
nHHVIdxAfterLastPiv = curBar - aHHVIdxAfterLastPiv[curBar];
if (lastHPIdx > lastLPIdx) {

/* There are at least two possibilities here. One is that
the previous high was higher, indicating that this is a 
possible short retracement or one in the making.
The other is that the previous high was lower, indicating 
that this is a possible long retracement in the working. 
However, both depend on opposing pivots. E.g., if I find 
higher highs, what if I have lower lows? 

If the highs are descending, then I can consider:
- a lower low, and leave it at that
- a higher high and higher low
- a lower low and another lower high
*/
if (aHPivHighs[0] < aHPivHighs[1]) {

if (nLLVAfterLastPiv < aLPivLows[0] AND 
(nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
AND nLLVIdxAfterLastPiv != curBar ) {

// -- OK, we'll add this as a pivot. 
// Mark it for plotting...
aLPivs[nLLVIdxAfterLastPiv] = 1;
aAddedLPivs[nLLVIdxAfterLastPiv] = 1;

// ...and then rearrange elements in the 
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = nLLVAfterLastPiv;
aLPivIdxs[0] = nLLVIdxAfterLastPiv;
nLPivs++;

// -- Test whether to add piv given last piv is high 
// AND we have lower highs 
}

// -- Here, the last piv is a high piv, and we have 
// higher-highs. The most likely addition is a 
// Low piv that is a retracement.
} else {

if (nLLVAfterLastPiv > aLPivLows[0] AND 
(nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
AND nLLVIdxAfterLastPiv != curBar ) {

// -- OK, we'll add this as a pivot. 
// Mark it for plotting...
aLPivs[nLLVIdxAfterLastPiv] = 1;
aAddedLPivs[nLLVIdxAfterLastPiv] = 1;

// ...and then rearrange elements in the 
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = nLLVAfterLastPiv;
aLPivIdxs[0] = nLLVIdxAfterLastPiv;
nLPivs++;

// -- Test whether to add piv given last piv is high 
// AND we have lower highs 
} 
// -- The last piv is a high and we have higher highs 
// OR lower highs
}

/* ****************************************************************
Still finding missed pivot(s). Here, the last piv is a low piv.
**************************************************************** */
} else {

// -- First case, lower highs
if (aHPivHighs[0] < aHPivHighs[1]) {

if (nHHVAfterLastPiv < aHPivHighs[0] AND 
(nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
AND nHHVIdxAfterLastPiv != curBar ) {

// -- OK, we'll add this as a pivot. 
// Mark that for plotting
aHPivs[nHHVIdxAfterLastPiv] = 1;
aAddedHPivs[nHHVIdxAfterLastPiv] = 1;

// ...and then rearrange elements in the 
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
}
aHPivHighs[0] = nHHVAfterLastPiv;
aHPivIdxs[0] = nHHVIdxAfterLastPiv;
nHPivs++;

// -- Test whether to add piv given last piv is high 
// AND we have lower highs 
}

// -- Second case when last piv is a low piv, higher highs 
// Most likely addition is high piv that is a retracement.
// Considering adding a high piv as long as it is higher
} else {

// -- Where I have higher highs,
if (nHHVAfterLastPiv > aHPivHighs[0] AND 
(nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
AND nHHVIdxAfterLastPiv != curBar ) {

// -- OK, we'll add this as a pivot. 
// Mark it for plotting...
aHPivs[nHHVIdxAfterLastPiv] = 1;
aAddedHPivs[nHHVIdxAfterLastPiv] = 1;

// ...and then rearrange elements in the 
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
}
aHPivHighs[0] = nHHVAfterLastPiv;
aHPivIdxs[0] = nHHVIdxAfterLastPiv;
nHPivs++;

// -- Test whether to add piv given last piv is high 
// AND we have lower highs 
}

}

} 

// -- If there are at least two of each
}

/* ****************************************
// -- Done with finding pivots
***************************************** */ 

if (bDraw) {
PivotEntry = ParamColor( "Entry Color", colorBrightGreen );
PivotEntry2 = ParamColor( "Entry Color2", colorYellow );
PivotExit = ParamColor( "Exit Color", colorRed );
PivotExit2 = ParamColor( "Exit Color2", colorYellow );
// -- OK, let's plot the pivots using arrows
PlotShapes(
IIf(aHPivs==1, shapeSquare, shapeNone), 
PivotExit, 0, High, Offset=30);
PlotShapes(
IIf(aAddedHPivs==1, shapeSquare, shapeNone),
PivotExit2, 0, High, Offset=30);
PlotShapes(
IIf(aLPivs==1, shapeSquare , shapeNone), 
PivotEntry, 0, Low, Offset=-30);
PlotShapes(
IIf(aAddedLPivs==1, shapeSquare , shapeNone), 
PivotEntry2, 0, Low, Offset=-30);

PlotShapes(
IIf(aHPivs==1, shapeSquare, shapeNone), 
colorBlack, 0, High, Offset=35);
PlotShapes(
IIf(aAddedHPivs==1, shapeSquare, shapeNone),
colorBlack, 0, High, Offset=35);
PlotShapes(
IIf(aLPivs==1, shapeSquare , shapeNone), 
colorBlack, 0, Low, Offset=-35);
PlotShapes(
IIf(aAddedLPivs==1, shapeSquare , shapeNone), 
colorBlack, 0, Low, Offset=-35);
}

/* ****************************************
// -- Done with discovering and plotting pivots 
***************************************** */ 

// -- I'm going to want to look for possible retracement
risk = 0;
profInc = 0;
nLeg0Pts = 0;
nLeg0Bars = 0;
nLeg0Vol = 0;
nLeg1Pts = 0;
nLeg1Bars = 0;
nLeg1Vol = 0;
nLegBarsDiff = 0;
nRtrc0Pts = 0;
nRtrc0Bars = 0;
nRtrc0Vol = 0;
nRtrc1Pts = 0;
nRtrc1Bars = 0;
nRtrc1Vol = 0;

minRtrc = 0;
maxRtrc = 0;
minLine = 0;
maxLine = 0;
triggerLine = 0;
firstProfitLine = 0;
triggerInc = 0;
triggerPrc = 0;
firstProfitPrc = 0;
retrcPrc = 0;
retrcBar = 0;
retrcBarIdx = 0;
retrcRng = 0;
aRetrcPrc = H-H;
aRetrcPrcBars = H-H;
aRetrcClose = C;
retrcClose = 0;

// -- Do TCZ calcs. Arrangement of pivs very specific
// for this setup.
if (nHPivs >= 2 AND 
nLPivs >=2 AND 
aHPivHighs[0] > aHPivHighs[1] AND
aLPivLows[0] > aLPivLows[1]) {

tcz500 = 
(aHPivHighs[0] -
(.5 * (aHPivHighs[0] - aLPivLows[1])));

tcz618 = 
(aHPivHighs[0] -
(.618 * (aHPivHighs[0] - aLPivLows[1])));

tcz786 = 
(aHPivHighs[0] -
(.786 * (aHPivHighs[0] - aLPivLows[0])));

retrcRng = curBar - aHPivIdxs[0];
aRetrcPrc = LLV(L, retrcRng);
aRetrcPrcBars = LLVBars(L, retrcRng);

retrcPrc = aRetrcPrc[curBar];
retrcBarIdx = curBar - aRetrcPrcBars[curBar];
retrcClose = aRetrcClose[retrcBarIdx];

// -- bTCZLong setup?
bTCZLong = (

// -- Are retracement levels arranged in
// tcz order?

// .500 is above .786 for long setups
tcz500 >= (tcz786 * (1 - .005))
AND 
// .681 is below .786 for long setups
tcz618 <= (tcz786 * (1 + .005))
AND

// -- Is the low in the tcz range
// -- Is the close >= low of tcz range
// and low <= high of tcz range
retrcClose >= ((1 - .01) * tcz618)
AND
retrcPrc <= ((1 + .01) * tcz500)
); 

// -- risk would be high of signal bar minus low of zone
//risk = 0;

// -- lower highs and lower lows
} else if (nHPivs >= 2 AND nLPivs >=2 
AND aHPivHighs[0] < aHPivHighs[1] 
AND aLPivLows[0] < aLPivLows[1]) {

tcz500 = 
(aHPivHighs[1] -
(.5 * (aHPivHighs[1] - aLPivLows[0])));

tcz618 = 
(aHPivHighs[0] -
(.618 * (aHPivHighs[1] - aLPivLows[0])));

tcz786 = 
(aHPivHighs[0] -
(.786 * (aHPivHighs[0] - aLPivLows[0])));

retrcRng = curBar - aLPivIdxs[0];
aRetrcPrc = HHV(H, retrcRng);
retrcPrc = aRetrcPrc[curBar];
aRetrcPrcBars = HHVBars(H, retrcRng);
retrcBarIdx = curBar - aRetrcPrcBars[curBar];
retrcClose = aRetrcClose[retrcBarIdx];

bTCZShort = (
// -- Are retracement levels arranged in
// tcz order?

// .500 is below .786 for short setups
tcz500 <= (tcz786 * (1 + .005))
AND 
// .681 is above .786 for short setups
tcz618 >= (tcz786 * (1 - .005)) 
AND

// -- Is the close <= high of tcz range
// and high >= low of tcz range
retrcClose <= ((1 + .01) * tcz618)
AND
retrcPrc >= ((1 - .01) * tcz500)
); 

// -- Risk would be top of zone - low of signal bar 
//risk = 0;
}

// -- Show zone if present
if (bTCZShort OR bTCZLong) { 

// -- Be prepared to see symmetry
if (bTCZShort) {
if (aLPivIdxs[0] > aHPivIdxs[0]) { 
// -- Valuable, useful symmetry information 
nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
nRtrc1Pts = retrcPrc - aLPivLows[0];
nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
} else {
nRtrc0Pts = aHPivHighs[1] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[1] - aLPivIdxs[1] + 1;
nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
nRtrc1Bars = aHPivIdxs[0] - aLPivIdxs[0] + 1;
}
} else { // bLongSetup
if (aLPivIdxs[0] > aHPivIdxs[0]) { 
nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
nRtrc1Pts = retrcPrc - aLPivLows[0];
nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
} else {
nRtrc0Pts = aHPivHighs[1] - aLPivLows[0];
nRtrc0Bars = aLPivIdxs[0] - aHPivIdxs[1] + 1;
nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
nRtrc1Bars = aLPivIdxs[0] - aHPivIdxs[0] + 1;
}
}

if (bShowTCZ) {
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz500, curBar, tcz500 , 0), 
"tcz500", colorPaleBlue, styleLine|styleNoTitle|Stylehidden);
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz618, curBar, tcz618, 0), 
"tcz618", colorPaleBlue, styleLine|styleNoTitle|styleHidden);
Plot(
LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
tcz786, curBar, tcz786, 0), 
"tcz786", colorTurquoise, styleLine|styleNoTitle|StyleHidden);
}

// -- if (bShowTCZ)
}

if (bDraw) {
Title = Name() + " (" + StrLeft(FullName(), 10) + 
") ATR: " + NumToStr(ATR(1), 4.2) + " ( " + 
NumToStr((C - Ref(C, -1)), 4.2) + " / " +
NumToStr((((C - Ref(C, -1)) / Ref(C, -1)) * 100), 2.1) + "% ) " +
WriteVal( SelectedValue( DateTime() ), formatDateTime) +

// "Risk: " + WriteVal(risk, 2.1) + "% \n" +

WriteVal(nRtrc1Pts, 2.1) + " \n" +

WriteVal(nRtrc1Bars, 2.0);
}

// **************************
// END INDICATOR CODE
// **************************
_SECTION_END();

_SECTION_BEGIN("Title"); 
Title = StrFormat("\\c02{{NAME}}.....{{DATE}}.....Open @ %g.....High @ %g.....Low @ %g.....Close @ %g.....Change = %.1f%% 
Volume = " +WriteVal( V, 1.0 ) +", {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 )) )
;
_SECTION_END();

_SECTION_BEGIN("Beta Adjusted Trailing Stops by Southwind");
//Concept from Bulkowski’s Stop Placement


dif=Ref(High,0)-Ref(Low,0);
dif1=Ref(High,-1)-Ref(Low,-1);
dif2=Ref(High,-2)-Ref(Low,-2);
dif3=Ref(High,-3)-Ref(Low,-3);
dif4=Ref(High,-4)-Ref(Low,-4);
dif5=Ref(High,-5)-Ref(Low,-5);
dif6=Ref(High,-6)-Ref(Low,-6);
dif7=Ref(High,-7)-Ref(Low,-7);
dif8=Ref(High,-8)-Ref(Low,-8);
dif9=Ref(High,-9)-Ref(Low,-9);
dif10=Ref(High,-10)-Ref(Low,-10);
dif11=Ref(High,-11)-Ref(Low,-11);
dif12=Ref(High,-12)-Ref(Low,-12);
dif13=Ref(High,-13)-Ref(Low,-13);
dif14=Ref(High,-14)-Ref(Low,-14);
dif15=Ref(High,-15)-Ref(Low,-15);

Sumdif=(dif+dif1+dif2+dif3+dif4+dif5+dif6+dif7+dif8+dif9+dif10+dif11+dif12+dif13+dif14+dif15)/16;

mp = Param("Multiplier",2,0.25,5,0.25); 
Sumdifml=(Sumdif*1);
Sumdifml2=(Sumdif*1.6);
Sumdifml3=(Sumdif*mp);

Betastops=HHV(C,20) - Sumdifml;
Betastops2=HHV(C,15) - Sumdifml2;


//BetastopsO=Ref(L,-1)-sumdifml;
//Plot(betastopsO,"BATS",ParamColor("", colorGreen) ,ParamStyle("",styleLine|styleThick|styleStaircase,maskAll));
Plot(Betastops, "A", ParamColor( "Color", colorYellow ),ParamStyle("Style",styleThick,maskAll));
Plot(Betastops2, "B", ParamColor( "Color2", colorGold ),ParamStyle("Style2",styleThick,maskAll));

//Plot(Sumdifml,"DifferenceX",3,styleNoLine |styleNoLabel);
//Plot(sumdif,"AvgDifference",25,styleNoLine |styleNoLabel);
//Plot(dif10,"AvgDifference1",26,styleNoLine |styleNoLabel);
_SECTION_END();

2 comments

2. gopal

Hi Administrator,

Through this website,some of the members are trying to market their tips subscription and want to increasse tgheir subscriber base.

Please take a note of this.

Thanks,

3. administrator

Hi gopal

I have noticed this too and will put a stop to it. Reporting as spam also brings it to my attention.

Thanks.

Leave Comment

Please login here to leave a comment.

Back