Stock Portfolio Organizer
The ultimate porfolio management solution.
WiseTrader Toolbox
#1 Selling Amibroker Plugin featuring:
TOXIC for Amibroker (AFL)
Pivot trading system. Beware that pivots are based on future data.
Screenshots
Similar Indicators / Formulas
Indicator / Formula
_SECTION_BEGIN("Patterns Wave"); SetChartBkColor(16); Change = Param("Wave Period",0.2,0,100,0.1); WaveLineColor = ParamColor("Wave Color", colorWhite ); procedure PlotShapeAt( x, y, shape, shift ) { PlotShapes( IIf( BarIndex() == x, shape, 0 ), WaveLineColor, 0, y, shift ); } WavePattern=ParamToggle("Wave","No|Yes",0); if(WavePattern) { bi = BarIndex(); sbi = SelectedValue( bi ); GraphXSpace = 2; Plot( Zig( C, Change ), "", WaveLineColor, ParamStyle("Wave Style", styleThick|styleNoLabel|styleNoTitle) ); upshift = 15; if( SelectedValue( PeakBars( C, Change ) < TroughBars( C, Change ) ) ) { pt1 = PeakBars( C, Change, 1 ) == 0 ; pt2 = TroughBars( C, Change, 1 ) == 0 ; } else { pt1 = TroughBars( C, Change, 1 ) == 0 ; pt2 = PeakBars( C, Change, 1 ) == 0 ; upshift = -upshift; } bpt1 = SelectedValue( ValueWhen( pt1, bi ) ); bpt2 = SelectedValue( ValueWhen( pt2, bi ) ); bpt3 = SelectedValue( ValueWhen( pt1, bi, 2 ) ); bpt4 = SelectedValue( ValueWhen( pt2, bi, 2 ) ); bpt5 = SelectedValue( ValueWhen( pt1, bi, 3 ) ); bpt6 = SelectedValue( ValueWhen( pt2, bi, 3 ) ); PlotShapeAt( bpt1, C, shapeDigit5, upshift ); PlotShapeAt( bpt2, C, shapeDigit4, -upshift ); PlotShapeAt( bpt3, C, shapeDigit3, upshift ); PlotShapeAt( bpt4, C, shapeDigit2, -upshift ); PlotShapeAt( bpt5, C, shapeDigit1, upshift ); } _SECTION_END(); _SECTION_BEGIN("MACD Fill"); // Parameters PeriodEMA = 13; MACDIndicatorRange = 50; // Volume filter VolumeFilter = Param( "Volume MA filter", 100000, 50000, 500000, 100000 ); Timeframe = Interval(2); // Adjust for weekly if necessary if( Timeframe == "5-day" || Timeframe == "Weekly" ) { VolumeFilter = VolumeFilter * 5; } else if( Timeframe == "Monthly") { VolumeFilter = VolumeFilter * 20; } else if( Timeframe != "Daily" ) { VolumeFilter = 0; } // Minimum number of bars required to form a divergence pattern. For a // positive divergence, this is the number of falling bars in the context // of a rising MACD or MACD-H pattern. Vice versa for negative divergence MACDDivMinWidth = Param("Divergence min width", 4, 1, 10, 1 ); // Minimum width of negative projecting wave between two positive MACD-H waves, // otherwise two positive waves will be considered as one single wave. This // minimises invalid divergences, to ensure that "back of bears is broken". // The same applies for a positive wave between two negative waves. HistMinWidth = Param("Histogram min width", 4, 1, 10, 1 ); PeriodEMA = Optimize( "PeriodEMA ", 13, 5, 23, 1 ); // Other parameters OpenPositions = 10; ATRPeriod = 5; InitialCapital = 100000; PeriodFast = Param( "Fast EMA", 8, 2, 200, 1 ); PeriodSlow = Param( "Slow EMA", 17, 2, 200, 1 ); PeriodSignal = Param( "Signal EMA", 9, 2, 200, 1 ); MACDInd = MACD(PeriodFast, PeriodSlow ); SigInd = Signal(PeriodFast, PeriodSlow , PeriodSignal ); HistInd = MACDInd - SigInd ; _N( macdStr = WriteVal( PeriodFast, 1.0 )+","+WriteVal( PeriodSlow , 1.0 ) ); _N( sigStr = macdStr + ","+WriteVal( PeriodSignal , 1.0 ) ); // Get displayed min and max value of MACD and MACD-H, to rescale it for better visibility scMACDMax = LastValue(HHV(Max(MACDInd, sigInd), BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); scMACDMin = LastValue(LLV(Min(MACDInd, sigInd), BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); scaleMACD = Max( abs(scMACDMax), abs(scMACDMin) ); scHistMax = LastValue(HHV(HistInd, BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); scHistMin = LastValue(LLV(HistInd, BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); scaleHist = Max( abs(scHistMax), abs(scHistMin) ); _SECTION_END(); _SECTION_BEGIN("Candle Detail"); Candletype=ParamList("Candle Type","Candle|Haikin",1); UpCandle = ParamColor("Up Color", colorBrightGreen ); DownCandle = ParamColor("Down Color", colorRed ); Consolidation = ParamColor("Consolidation", colorWhite ); MACDColorUp = ParamColor("MACD Up", colorDarkGreen ); MACDColorDown = ParamColor("MACD Down", colorDarkRed ); Prd1=Param("ATR Period",4,1,20,1); Prd2=Param("Look Back",8,1,20,1); if(Candletype=="Candle") { CandleColor = IIf(O > C, DownCandle, UpCandle); CCI_col = IIf(CCI(14) > 100, colorGold,IIf(CCI(14) < -100, colorCustom12,IIf((CCI(14) - Ref(CCI(14),-1)) > 0, colorBrightGreen,colorRed))); Plot( Close, "Price", CCI_col, styleBar+styleThick ); } else if(Candletype=="Haikin") { HaClose = (O+H+L+C)/4; HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); HaHigh = Max( H, Max( HaClose, HaOpen ) ); HaLow = Min( L, Min( HaClose, HaOpen ) ); HaClose = (O+H+L+C)/4; HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); HaHigh = Max( H, Max( HaClose, HaOpen ) ); HaLow = Min( L, Min( HaClose, HaOpen ) ); BrightGreen=HHV(LLV(L,Prd1)+ATR(Prd1),Prd2); BrightRed=LLV(HHV(H,Prd1)-ATR(Prd1),Prd2); xDiff = (HaHigh - Halow) * IIf(StrFind(Name(),"JPY"),100,10000); barcolor = IIf(C>BrightGreen ,UpCandle,IIf(C < BrightRed,DownCandle,Consolidation)); SetBarFillColor( IIf(MACDInd >SigInd, MACDColorUp,MACDColorDown) ); PlotOHLC( HaOpen, HaHigh, HaLow, HaClose, "", barcolor, styleCandle ); } _SECTION_END(); _SECTION_BEGIN("Guppy"); Guppy=ParamToggle("Guyyp","No|Yes",1); if(Guppy) { //Plot( EMA( C, 30 ),"", colorYellow, ParamStyle("Chart Style", styleLine|styleNoLabel) ); Plot( EMA( C, 34 ),"", colorYellow, styleThick ); Plot( EMA( C, 3 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 5 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 8 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 10 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 13 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 15 ),"", colorDarkBlue, styleThick+styleNoLabel ); Plot( EMA( C, 40 ),"", colorRed, ParamStyle("Chart Style", styleLine|styleNoLabel) ); Plot( EMA( C, 45 ),"", colorRed, ParamStyle("Chart Style", styleLine|styleNoLabel) ); Plot( EMA( C, 50 ),"", colorRed, ParamStyle("Chart Style", styleLine|styleNoLabel) ); Plot( EMA( C, 55 ),"", colorRed, ParamStyle("Chart Style", styleLine|styleNoLabel) ); Plot( EMA( C, 60 ),"", colorRed, ParamStyle("Chart Style", styleLine|styleNoLabel) ); } _SECTION_END(); _SECTION_BEGIN("Support-Resistance"); SupRes=ParamToggle("Sup-Res","No|Yes",1); SupResA = Param("Sup-Res A Period",20,0,100,1); SupResB = Param("Sup-Res B Period",25,0,100,1); Res1 = ParamColor("Resistance High", colorRed ); Res2 = ParamColor("Resistance Low", colorDarkRed ); Sup1 = ParamColor("Support High", colorDarkGreen ); Sup2 = ParamColor("Support Low", colorBrightGreen ); if(SupRes) { MaxGraph = 12; BuyOffSet = SupResA;//Optimize("BuyOffSet",18,15,20,1); SellOffset = BuyOffSet;//Optimize("SellOffset",2,2,14,2); RegLength = 5;//Optimize("RegLength",5, 2,11,2); BuyATRPeriod = 2;//Optimize("BuyATRPeriod",2,2,5,1); SellATRPeriod = BuyATRPeriod;//Optimize("SellATRPeriod",4,2,11,2); ATRMultiplier = 0.5;//Optimize("ATRMultiplier",1,0.7,1.25,.05); SuppA = HHV(H-ATRMultiplier*ATR(BuyATRPeriod),BuyOffset); /* RED */ RessB = LLV(L+ATRMultiplier*ATR(SellATRPeriod),SellOffset); /* GREEN */ Plot(SuppA,"",sup1,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) ); Plot(RessB,"",res2,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) ); nn=SupResB; mmm=100; TYP=(High + Low + 2*Close)/4; CI=(TYP-MA(TYP,14))/(0.015*StDev(TYP,14)); CCCI=EMA(CI,5)+mmm; Hh=HHV(H,nn); Ll=LLV(L,nn); MM=(Hh+Ll)/2; CCCC=EMA(CCCI*(Hh-Ll)/(2*mmm)+Ll,5); Plot(Hh,"",Res1, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) ); Plot(Ll,"",Sup2, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) ) ; } _SECTION_END(); _SECTION_BEGIN("BB"); BBand=ParamToggle("B.Band","No|Yes",0); if(BBand) { pr1=Param( "Period1",20,0,100,1); pr2=Param( "Period2",2.25,0,100,1); BBColor = ParamColor( "Band Color", colorGrey50 ); Cloud = ParamColor( "Cloud", colorDarkGrey ); Style = styleNoRescale | styleNoLabel |styleDashed; BBT=BBandTop(C,pr1,pr2); BBB=BBandBot(C,pr1,pr2); bbtop = BBandTop(C,20,1); bbbot = BBandBot(C,20,1); topcond = (Cross(BBT,C)OR C>BBT)AND Ref(C, -1)> BBT; botcond = ( Cross(C,BBB))AND Ref(C, -1 < BBB); Plot( BBT, "BBTop" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) ); Plot( BBB, "BBBot" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) ); PlotOHLC( bbtop,bbtop,bbbot,bbtop, "", colorBlack,styleCloud|styleNoLabel ); PlotOHLC( BBT,BBT,BBB,BBB, "", Cloud,styleCloud|styleNoLabel ); } _SECTION_END(); _SECTION_BEGIN("Pivot"); nBars = Param("Number of bars", 12, 5, 40); bShowTCZ = Param("Show TCZ", 1, 0, 1); nExploreBarIdx = 0; nExploreDate = 0; nCurDateNum = 0; DN = DateNum(); DT = DateTime(); bTCZLong = False; bTCZShort = False; nAnchorPivIdx = 0; ADX8 = ADX(8); if(Status("action")==1) { bDraw = True; bUseLastVis = 1; } else { bDraw = False; bUseLastVis = False; bTrace = 1; nExploreDate = Status("rangetodate"); for (i=LastValue(BarIndex());i>=0;i--) { nCurDateNum = DN[i]; if (nCurDateNum == nExploreDate) { nExploreBarIdx = i; } } } GraphXSpace=7; if (bDraw) { } aHPivs = H - H; aLPivs = L - L; aHPivHighs = H - H; aLPivLows = L - L; aHPivIdxs = H - H; aLPivIdxs = L - L; aAddedHPivs = H - H; aAddedLPivs = L - L; aLegVol = H - H; aRetrcVol = H - H; nHPivs = 0; nLPivs = 0; lastHPIdx = 0; lastLPIdx = 0; lastHPH = 0; lastLPL = 0; curPivBarIdx = 0; aHHVBars = HHVBars(H, nBars); aLLVBars = LLVBars(L, nBars); aHHV = HHV(H, nBars); aLLV = LLV(L, nBars); nLastVisBar = LastValue( Highest(IIf(Status("barvisible"), BarIndex(), 0))); curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar, IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx, LastValue(BarIndex()))); curTrend = ""; if (aLLVBars[curBar] < aHHVBars[curBar]) curTrend = "D"; else curTrend = "U"; if (curBar >= 120) { for (i=0; i<120; i++) { curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar-i, IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx-i, LastValue(BarIndex())-i)); if (aLLVBars[curBar] < aHHVBars[curBar]) { if (curTrend == "U") { curTrend = "D"; curPivBarIdx = curBar - aLLVBars[curBar]; aLPivs[curPivBarIdx] = 1; aLPivLows[nLPivs] = L[curPivBarIdx]; aLPivIdxs[nLPivs] = curPivBarIdx; nLPivs++; } } else { if (curTrend == "D") { curTrend = "U"; curPivBarIdx = curBar - aHHVBars[curBar]; aHPivs[curPivBarIdx] = 1; aHPivHighs[nHPivs] = H[curPivBarIdx]; aHPivIdxs[nHPivs] = curPivBarIdx; nHPivs++; } } } } curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar, IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx, LastValue(BarIndex())) ); if (nHPivs >= 2 AND nLPivs >= 2) { lastLPIdx = aLPivIdxs[0]; lastLPL = aLPivLows[0]; lastHPIdx = aHPivIdxs[0]; lastHPH = aHPivHighs[0]; nLastHOrLPivIdx = Max(lastLPIdx, lastHPIdx); nAddPivsRng = curBar - nLastHOrLPivIdx; aLLVAfterLastPiv = LLV(L, nAddPivsRng); nLLVAfterLastPiv = aLLVAfterLastPiv[curBar]; aLLVIdxAfterLastPiv = LLVBars(L, nAddPivsRng); nLLVIdxAfterLastPiv = curBar - aLLVIdxAfterLastPiv[curBar]; aHHVAfterLastPiv = HHV(H, nAddPivsRng); nHHVAfterLastPiv = aHHVAfterLastPiv[curBar]; aHHVIdxAfterLastPiv = HHVBars(H, nAddPivsRng); nHHVIdxAfterLastPiv = curBar - aHHVIdxAfterLastPiv[curBar]; if (lastHPIdx > lastLPIdx) { /* There are at least two possibilities here. One is that the previous high was higher, indicating that this is a possible short retracement or one in the making. The other is that the previous high was lower, indicating that this is a possible long retracement in the working. However, both depend on opposing pivots. E.g., if I find higher highs, what if I have lower lows? If the highs are descending, then I can consider: - a lower low, and leave it at that - a higher high and higher low - a lower low and another lower high */ if (aHPivHighs[0] < aHPivHighs[1]) { if (nLLVAfterLastPiv < aLPivLows[0] AND (nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1 AND nLLVIdxAfterLastPiv != curBar ) { // -- OK, we'll add this as a pivot. // Mark it for plotting... aLPivs[nLLVIdxAfterLastPiv] = 1; aAddedLPivs[nLLVIdxAfterLastPiv] = 1; // ...and then rearrange elements in the // pivot information arrays for (j=0; j<nLPivs; j++) { aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)]; aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)]; } aLPivLows[0] = nLLVAfterLastPiv; aLPivIdxs[0] = nLLVIdxAfterLastPiv; nLPivs++; // -- Test whether to add piv given last piv is high // AND we have lower highs } // -- Here, the last piv is a high piv, and we have // higher-highs. The most likely addition is a // Low piv that is a retracement. } else { if (nLLVAfterLastPiv > aLPivLows[0] AND (nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1 AND nLLVIdxAfterLastPiv != curBar ) { // -- OK, we'll add this as a pivot. // Mark it for plotting... aLPivs[nLLVIdxAfterLastPiv] = 1; aAddedLPivs[nLLVIdxAfterLastPiv] = 1; // ...and then rearrange elements in the // pivot information arrays for (j=0; j<nLPivs; j++) { aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)]; aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)]; } aLPivLows[0] = nLLVAfterLastPiv; aLPivIdxs[0] = nLLVIdxAfterLastPiv; nLPivs++; // -- Test whether to add piv given last piv is high // AND we have lower highs } // -- The last piv is a high and we have higher highs // OR lower highs } /* **************************************************************** Still finding missed pivot(s). Here, the last piv is a low piv. **************************************************************** */ } else { // -- First case, lower highs if (aHPivHighs[0] < aHPivHighs[1]) { if (nHHVAfterLastPiv < aHPivHighs[0] AND (nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1 AND nHHVIdxAfterLastPiv != curBar ) { // -- OK, we'll add this as a pivot. // Mark that for plotting aHPivs[nHHVIdxAfterLastPiv] = 1; aAddedHPivs[nHHVIdxAfterLastPiv] = 1; // ...and then rearrange elements in the // pivot information arrays for (j=0; j<nHPivs; j++) { aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)]; aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)]; } aHPivHighs[0] = nHHVAfterLastPiv; aHPivIdxs[0] = nHHVIdxAfterLastPiv; nHPivs++; // -- Test whether to add piv given last piv is high // AND we have lower highs } // -- Second case when last piv is a low piv, higher highs // Most likely addition is high piv that is a retracement. // Considering adding a high piv as long as it is higher } else { // -- Where I have higher highs, if (nHHVAfterLastPiv > aHPivHighs[0] AND (nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1 AND nHHVIdxAfterLastPiv != curBar ) { // -- OK, we'll add this as a pivot. // Mark it for plotting... aHPivs[nHHVIdxAfterLastPiv] = 1; aAddedHPivs[nHHVIdxAfterLastPiv] = 1; // ...and then rearrange elements in the // pivot information arrays for (j=0; j<nHPivs; j++) { aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)]; aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)]; } aHPivHighs[0] = nHHVAfterLastPiv; aHPivIdxs[0] = nHHVIdxAfterLastPiv; nHPivs++; // -- Test whether to add piv given last piv is high // AND we have lower highs } } } // -- If there are at least two of each } /* **************************************** // -- Done with finding pivots ***************************************** */ if (bDraw) { PivotEntry = ParamColor( "Entry Color", colorBrightGreen ); PivotEntry2 = ParamColor( "Entry Color2", colorYellow ); PivotExit = ParamColor( "Exit Color", colorRed ); PivotExit2 = ParamColor( "Exit Color2", colorYellow ); // -- OK, let's plot the pivots using arrows PlotShapes( IIf(aHPivs==1, shapeSquare, shapeNone), PivotExit, 0, High, Offset=30); PlotShapes( IIf(aAddedHPivs==1, shapeSquare, shapeNone), PivotExit2, 0, High, Offset=30); PlotShapes( IIf(aLPivs==1, shapeSquare , shapeNone), PivotEntry, 0, Low, Offset=-30); PlotShapes( IIf(aAddedLPivs==1, shapeSquare , shapeNone), PivotEntry2, 0, Low, Offset=-30); PlotShapes( IIf(aHPivs==1, shapeSquare, shapeNone), colorBlack, 0, High, Offset=35); PlotShapes( IIf(aAddedHPivs==1, shapeSquare, shapeNone), colorBlack, 0, High, Offset=35); PlotShapes( IIf(aLPivs==1, shapeSquare , shapeNone), colorBlack, 0, Low, Offset=-35); PlotShapes( IIf(aAddedLPivs==1, shapeSquare , shapeNone), colorBlack, 0, Low, Offset=-35); } /* **************************************** // -- Done with discovering and plotting pivots ***************************************** */ // -- I'm going to want to look for possible retracement risk = 0; profInc = 0; nLeg0Pts = 0; nLeg0Bars = 0; nLeg0Vol = 0; nLeg1Pts = 0; nLeg1Bars = 0; nLeg1Vol = 0; nLegBarsDiff = 0; nRtrc0Pts = 0; nRtrc0Bars = 0; nRtrc0Vol = 0; nRtrc1Pts = 0; nRtrc1Bars = 0; nRtrc1Vol = 0; minRtrc = 0; maxRtrc = 0; minLine = 0; maxLine = 0; triggerLine = 0; firstProfitLine = 0; triggerInc = 0; triggerPrc = 0; firstProfitPrc = 0; retrcPrc = 0; retrcBar = 0; retrcBarIdx = 0; retrcRng = 0; aRetrcPrc = H-H; aRetrcPrcBars = H-H; aRetrcClose = C; retrcClose = 0; // -- Do TCZ calcs. Arrangement of pivs very specific // for this setup. if (nHPivs >= 2 AND nLPivs >=2 AND aHPivHighs[0] > aHPivHighs[1] AND aLPivLows[0] > aLPivLows[1]) { tcz500 = (aHPivHighs[0] - (.5 * (aHPivHighs[0] - aLPivLows[1]))); tcz618 = (aHPivHighs[0] - (.618 * (aHPivHighs[0] - aLPivLows[1]))); tcz786 = (aHPivHighs[0] - (.786 * (aHPivHighs[0] - aLPivLows[0]))); retrcRng = curBar - aHPivIdxs[0]; aRetrcPrc = LLV(L, retrcRng); aRetrcPrcBars = LLVBars(L, retrcRng); retrcPrc = aRetrcPrc[curBar]; retrcBarIdx = curBar - aRetrcPrcBars[curBar]; retrcClose = aRetrcClose[retrcBarIdx]; // -- bTCZLong setup? bTCZLong = ( // -- Are retracement levels arranged in // tcz order? // .500 is above .786 for long setups tcz500 >= (tcz786 * (1 - .005)) AND // .681 is below .786 for long setups tcz618 <= (tcz786 * (1 + .005)) AND // -- Is the low in the tcz range // -- Is the close >= low of tcz range // and low <= high of tcz range retrcClose >= ((1 - .01) * tcz618) AND retrcPrc <= ((1 + .01) * tcz500) ); // -- risk would be high of signal bar minus low of zone //risk = 0; // -- lower highs and lower lows } else if (nHPivs >= 2 AND nLPivs >=2 AND aHPivHighs[0] < aHPivHighs[1] AND aLPivLows[0] < aLPivLows[1]) { tcz500 = (aHPivHighs[1] - (.5 * (aHPivHighs[1] - aLPivLows[0]))); tcz618 = (aHPivHighs[0] - (.618 * (aHPivHighs[1] - aLPivLows[0]))); tcz786 = (aHPivHighs[0] - (.786 * (aHPivHighs[0] - aLPivLows[0]))); retrcRng = curBar - aLPivIdxs[0]; aRetrcPrc = HHV(H, retrcRng); retrcPrc = aRetrcPrc[curBar]; aRetrcPrcBars = HHVBars(H, retrcRng); retrcBarIdx = curBar - aRetrcPrcBars[curBar]; retrcClose = aRetrcClose[retrcBarIdx]; bTCZShort = ( // -- Are retracement levels arranged in // tcz order? // .500 is below .786 for short setups tcz500 <= (tcz786 * (1 + .005)) AND // .681 is above .786 for short setups tcz618 >= (tcz786 * (1 - .005)) AND // -- Is the close <= high of tcz range // and high >= low of tcz range retrcClose <= ((1 + .01) * tcz618) AND retrcPrc >= ((1 - .01) * tcz500) ); // -- Risk would be top of zone - low of signal bar //risk = 0; } // -- Show zone if present if (bTCZShort OR bTCZLong) { // -- Be prepared to see symmetry if (bTCZShort) { if (aLPivIdxs[0] > aHPivIdxs[0]) { // -- Valuable, useful symmetry information nRtrc0Pts = aHPivHighs[0] - aLPivLows[1]; nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1; nRtrc1Pts = retrcPrc - aLPivLows[0]; nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1; } else { nRtrc0Pts = aHPivHighs[1] - aLPivLows[1]; nRtrc0Bars = aHPivIdxs[1] - aLPivIdxs[1] + 1; nRtrc1Pts = aHPivHighs[0] - aLPivLows[0]; nRtrc1Bars = aHPivIdxs[0] - aLPivIdxs[0] + 1; } } else { // bLongSetup if (aLPivIdxs[0] > aHPivIdxs[0]) { nRtrc0Pts = aHPivHighs[0] - aLPivLows[1]; nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1; nRtrc1Pts = retrcPrc - aLPivLows[0]; nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1; } else { nRtrc0Pts = aHPivHighs[1] - aLPivLows[0]; nRtrc0Bars = aLPivIdxs[0] - aHPivIdxs[1] + 1; nRtrc1Pts = aHPivHighs[0] - aLPivLows[0]; nRtrc1Bars = aLPivIdxs[0] - aHPivIdxs[0] + 1; } } if (bShowTCZ) { Plot( LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]), tcz500, curBar, tcz500 , 0), "tcz500", colorPaleBlue, styleLine|styleNoTitle|Stylehidden); Plot( LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]), tcz618, curBar, tcz618, 0), "tcz618", colorPaleBlue, styleLine|styleNoTitle|styleHidden); Plot( LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]), tcz786, curBar, tcz786, 0), "tcz786", colorTurquoise, styleLine|styleNoTitle|StyleHidden); } // -- if (bShowTCZ) } if (bDraw) { } // ************************** // END INDICATOR CODE // ************************** _SECTION_END(); _SECTION_BEGIN("Fibo for all bars"); TimeFrameSet( inDaily ); DH=Ref(H,-1); DL=Ref(L,-1); DC=Ref(C,-1); pd = (O+ DH+ DL + DC )/4; sd1 = (2*pd)-DH; sd2 = pd -(DH - DL); sd3 = Sd1 - (DH-DL); rd1 = (2*pd)-DL; rd2 = pd +(DH -DL); rd3 = rd1 +(DH-DL); H4 = (dH - dL) * 1.1 / 2 + dC; H3 = (dH - dL) * 1.1 / 4 + dC; h2 = (dH - dL) * 1.1 / 6 + dC; H1 = (dH - dL) * 1.1 / 12 + dC; L1 = dC - (dH - dL) * 1.1 / 12; L2 = dC - (dH - dL) * 1.1 / 6; L3 = dC - (dH - dL) * 1.1 / 4; L4 = dC - (dH - dL) * 1.1 / 2 ; //Plot (pd,"Pivot",colorBlue,styleDots); //Plot (rd1," R1 ",35,styleDots); //Plot (rd2," R2 ",35,styleDots); //Plot (rd3," R3 ",35,styleDots); //Plot (sd1," S1 ",4,styleDots); //Plot (Sd2," S2 ",4,styleDots); //Plot (Sd3," S3 ",4,8+16); /* style = IIf(ParamList("Chart style", "styleCandle|styleBar")=="styleCandle",64,128+4); Plot (C,Date ()+" close",1,style); //ENABLE THIS TO HAVE CANDLES AS WELL */ TimeFrameRestore(); tgt_up = H4*5/1000 + H4; tgt_up2 = H4*10/1000 + H4; tgt_dn = L4-L4*5/1000; tgt_dn2 = L4-L4*10/1000; Title = EncodeColor(colorWhite)+ "LINKON'S PIVOT TRADING SYSTEM" + " - " + Name() + " - " + EncodeColor(colorRed)+ Interval(2) + EncodeColor(colorWhite) + " - " + Date() +" - " //+ WriteIf(Col_action==colorGreen, EncodeColor(colorGreen)+"stay LONG","")+ WriteIf(Col_action==colorRed, EncodeColor(colorRed)+"stay SHORT","")+ WriteIf(Col_action==colorBlack, EncodeColor(colorYellow)+"No Trend","")+"\n" + "Vol= "+ WriteVal(V) +WriteIf ( V > MA(V,26) ,EncodeColor(colorGreen)+" UP "+ (V/MA(V,26))*100 + " %", EncodeColor(colorRed)+" DOWN "+ (V/MA(V,26))*100 + " %") + EncodeColor(colorGreen)+ "\n H4 : "+ EncodeColor(colorWhite)+H4+ EncodeColor(colorGreen)+ " tgt : "+ EncodeColor(colorWhite)+tgt_up +EncodeColor(colorGreen)+ " tgt2 : "+ EncodeColor(colorWhite)+tgt_up2 + EncodeColor(colorGreen)+ "\n H3 : "+ EncodeColor(colorWhite)+H3 + EncodeColor(colorGreen)+ "\n H2 : "+ EncodeColor(colorWhite)+H2 + EncodeColor(colorGreen)+ "\n H1 : "+ EncodeColor(colorWhite)+H1+ EncodeColor(colorGreen)+ "` Hi: "+ EncodeColor(colorWhite)+H + EncodeColor(colorBlue)+ "\n Pivot : "+ EncodeColor(colorWhite)+pd + EncodeColor(colorYellow)+ "` Op: "+ EncodeColor(colorWhite)+O+ EncodeColor(colorAqua)+ "Cl: "+ EncodeColor(colorBrightGreen)+C + EncodeColor(colorRed)+ "\n L1 : "+ EncodeColor(colorWhite)+L1+ EncodeColor(colorRed)+ "` Lo: "+ EncodeColor(colorWhite)+L + EncodeColor(colorRed)+ "\n L2 : "+ EncodeColor(colorWhite)+L2 + EncodeColor(colorRed)+ "\n L3 : "+ EncodeColor(colorWhite)+L3 + EncodeColor(colorRed)+ "\n L4 : "+ EncodeColor(colorWhite)+L4+ EncodeColor(colorRed)+ " tgt : "+ EncodeColor(colorWhite)+tgt_dn + EncodeColor(colorRed)+ " tgt2 : "+ EncodeColor(colorWhite)+tgt_dn2 +"\n" +EncodeColor(colorRed)+"\n SL for short : "+HH +EncodeColor(colorBrightGreen)+"\n SL for long : "+ LL ; _SECTION_END(); //Plot(6, "", IIf(PDI(7) > MDI(7) AND PDI(7) > 30,colorGreen,IIf (MDI(7) > PDI(7) AND MDI(7) > 30,colorRed,colorYellow)), styleOwnScale| styleArea|styleNoLabel,-0.5,100);
3 comments
Leave Comment
Please login here to leave a comment.
Back
it shown syntax error
xdiff=(hahigh-halow)*iif(strfind(name(),“jpy”),100,100000;barcoloriif(c>bright green,upcandle.iif(c<brightred,downcandle,consolidation))
set barfill colour(
i use it in amibroker 5 version . plz rectyfy it and give clear afl
Fine for me on Amibroker 5.3
Good work.