Stock Portfolio Organizer
The ultimate porfolio management solution.
WiseTrader Toolbox
#1 Selling Amibroker Plugin featuring:
Southbreeze Modified v2 for Amibroker (AFL)
Please ref the following 3 indicators to get this system working.
Southbreeze Modified: http://www.wisestocktrader.com/indicators/3223-southbreeze-modified
Better Volume: http://www.wisestocktrader.com/indicators/50-better-volume-indicator
Wave Trend : http://www.wisestocktrader.com/indicators/372-mikes-wave-trend-clone
Southbreeze Modified v2:
1. Beta Adjusted Trailing Stop Loss studied & fixed with dynamic color
2. Better Volume Indicator is taken out of the code ( needed to “Insert Linked” from charts )
3. Heiken Ashi Multi-Time Frame added ( like we used to see in MT4, check image for TF details )
4. Analysis Panel is moved above the Volume section on the left
5. Fibonacci Forcast replaced with “Signal Panel” since it also uses FIBO & gived a visual guide with possible target.
This system can kick some serious ass….enjoy trading with confidence!!
Screenshots
Similar Indicators / Formulas
Files
Indicator / Formula
_SECTION_BEGIN("CandleStick Analysis"); /*Body Colors*/ whiteBody=C>=O; blackBody=O>C; /*Body Size*/ smallBodyMaximum=0.0025;//less than 0.25% LargeBodyMinimum=0.01;//greater than 1.0% smallBody=(O>=C*(1-smallBodyMaximum) AND whiteBody) OR (C>=O*(1-smallBodyMaximum) AND blackBody); largeBody=(C>=O*(1+largeBodyMinimum) AND whiteBody) OR C<=O*(1-largeBodyMinimum) AND blackBody; mediumBody=NOT LargeBody AND NOT smallBody; identicalBodies=abs(abs(Ref(O,-1)-Ref(C,-1))-abs(O-C)) < abs(O-C)*smallBodyMaximum; realBodySize=abs(O-C); /*Shadows*/ smallUpperShadow=(whiteBody AND H<=C*(1+smallBodyMaximum)) OR (blackBody AND H<=O*(1+smallBodyMaximum)); smallLowerShadow=(whiteBody AND L>=O*(1-smallBodyMaximum)) OR (blackBody AND L>=C*(1-smallBodyMaximum)); largeUpperShadow=(whiteBody AND H>=C*(1+largeBodyMinimum)) OR (blackBody AND H>=O*(1+largeBodyMinimum)); largeLowerShadow=(whiteBody AND L<=O*(1-largeBodyMinimum)) OR (blackBody AND L<=C*(1-largeBodyMinimum)); /*Gaps*/ upGap= IIf(Ref(blackBody,-1)AND whiteBody AND O>Ref(O,-1),1, IIf(Ref(blackbody,-1) AND blackBody AND C>Ref(O,-1),1, IIf(Ref(whiteBody,-1) AND whiteBody AND O>Ref(C,-1),1, IIf(Ref(whiteBody,-1) AND blackBody AND C>Ref(C,-1),1,0)))); downGap=IIf(Ref(blackBody,-1)AND whiteBody AND C<Ref(C,-1),1, IIf(Ref(blackbody,-1) AND blackBody AND O<Ref(C,-1),1, IIf(Ref(whiteBody,-1) AND whiteBody AND C<Ref(O,-1),1, IIf(Ref(whiteBody,-1) AND blackBody AND O<Ref(O,-1),1,0)))); /*Candle Definitions*/ spinningTop=mediumBody; doji=CdDoji(threshold=0.05);/*abs(C-O) <= (C*smallBodyMaximum) OR (abs(O-C)<=((H-L)*0.1));*/ dojiStar=doji AND (upgap OR downgap)AND Ref(LargeBody,-1); marabuzu=LargeBody AND smallUpperShadow AND smallLowerShadow; /*(NOT largeBody AND smallLowerShadow AND LargeUpperShadow) OR*/ shootingStar=smallLowerShadow AND NOT doji AND ((blackBody AND abs(O-H)>2*realBodySize) OR (whiteBody AND abs(H-C)>2*realBodySize)); Hammer=smallUpperShadow AND NOT doji AND ((blackBody AND abs(C-L)>2*realBodySize) OR (whiteBody AND abs(L-O)>2*realBodySize)); tweezerTop=abs(H-Ref(H,-1))<=H*0.0025; tweezerBottom=abs(L-Ref(L,-1))<=L*0.0025; engulfing= IIf(blackBody AND Ref(blackbody,-1) AND C<Ref(C,-1) AND O>Ref(O,-1),1, IIf(blackBody AND Ref(whiteBody,-1) AND O>Ref(C,-1) AND C<Ref(O,-1),1, IIf(whitebody AND Ref(whitebody,-1) AND C>Ref(C,-1) AND O<Ref(O,-1),1, IIf(whiteBody AND Ref(blackBody,-1) AND C>Ref(O,-1)AND O<Ref(C,-1),1,0)))); Harami= IIf(blackbody AND Ref(blackBody,-1) AND O<Ref(O,-1) AND C>Ref(C,-1),1, IIf(blackBody AND Ref(whiteBody,-1) AND C>Ref(O,-1) AND O<Ref(C,-1),1, IIf(whiteBody AND Ref(whiteBody,-1) AND C<Ref(C,-1) AND O>Ref(O,-1),1, IIf(whiteBody AND Ref(blackBody,-1) AND O>Ref(C,-1) AND C<Ref(O,-1),1,0)))); /*Maximum High Today - (MHT) Today is the maximum High in the last 5 days*/ MHT= HHV(H,5)==H; /*Maximum High Yesterday - (MHY) Yesterday is the maximum High in the last 5 days*/ MHY= HHV(H,5)==Ref ( H, -1); /*Minimum Low Today - (MLT) Today is the minimum Low in the last 5 days*/ MLT= LLV(L,5)==L; /*Minimum Low Yesterday - (MLY) Yesterday is the minimum Low in the last 5 days*/ MLY= LLV(L,5)==Ref(L,-1); /*DOJI definitions*/ /*Doji Today - (DT)*/ DT = abs(C-O) <= (C*smallBodyMaximum) OR (abs(O-C)<=((H-L)*0.1)); /* Doji Yesterday - (DY)*/ DY = abs(Ref ( C, -1)-Ref(O,-1)) <= Ref ( C, -1) *smallBodyMaximum OR abs (Ref ( O, -1)-Ref(C,-1)) <= (Ref ( H, -1 ) - Ref ( L, -1 ) )*0.1; /************************************************** BULLISH CANDLESTICKS *************************************************** */ /* Abandoned Baby Bullish*/ abandonedBabybullish =Ref(largeBody,-2) AND Ref(blackBody,-2)//Large black candle AND Ref(GapDown(),-1) AND whiteBody AND LargeBody AND GapUp();//Large white candle /* Belt Hold*///Bad formula beltHoldBullish = largeBody AND smallLowerShadow AND whiteBody AND MLT; /*BreakAway Bullish*/ breakAwayBullish=Ref(Largebody,-4) AND Ref(blackBody,-4) AND Ref(blackBody,-3) AND Ref(O,-3)<Ref(C,-4) AND Ref(smallbody,-2) AND Ref(C,-2)<Ref(C,-3) AND Ref(C,-1)<Ref(C,-2) AND LargeBody AND whiteBody AND C>Ref(O, -3) AND C<Ref(C,-4); /*Concealing Baby Swallow only one trade */ ConcealingBabySwallow=Ref(marabuzu,-3) AND Ref(blackbody,-3) AND Ref(MArabuzu,-2) AND Ref(blackBody,-2) AND Ref(blackBody,-1) AND Ref(downGap,-1) AND Ref(H,-1)>Ref(C,-2)AND Ref(blackbody,-1)AND blackBody AND engulfing; /*Doji Star Bullish*/ dojiStarBullish=(dojiStar AND (MLT OR MLY))OR (doji AND (C<Ref(C,-1) OR O<Ref(C,-1))AND Ref(blackBody,-1) AND Ref(LargeBody,-1)); /*Engulfing Bullish*/ engulfingBullish = engulfing AND largeBody AND whiteBody AND (Ref(blackbody,-1) OR Ref(Doji,-1)) AND MLT; /*Hammer Bullish*/ hammerBullish=Hammer AND (MLT OR MLY); /*Dragonfly Doji Bullish*/ dragonflyDoji=smallBody AND LargeLowerShadow AND smallUpperShadow AND MLT; /* Harami Bullish*/ haramiBullish = harami AND Ref (LargeBody,-1) AND Ref(blackBody,-1) AND NOT LargeBody AND whiteBody; /*Harami Cross*/ HaramiCross=harami AND Ref(LargeBody,-1) AND Ref(blackBody,-1) AND doji; /* Homing Pigeon*/ homingPigeon = Ref(largeBody,-1) AND Ref(blackBody,-1) AND H<= Ref ( O, -1 ) AND L>=Ref( C, -1) AND C<O AND MLY; /*Inverted Hammer*/ invertedHammer=shootingStar AND (MLT OR MLY); /* Meeting LinesBullish*/ meetingLinesbullish= Ref(LargeBody,-1) AND Ref(blackBody,-1) AND LargeBody AND whiteBody AND C>Ref(C,-1)*0.9975 AND C< Ref(C,-1)*1.0025; /*Morning Doji Star*/ morningDojiStar= Ref(LargeBody,-2) AND Ref(blackBody,-2) AND Ref(doji,-1) AND Ref(O,-1)<Ref(C,-2) AND whiteBody AND C>Ref(C,-2) AND MLY; /* Morning Star*/ morningStar =Ref(largeBody,-2) AND Ref(blackBody,-2)//Large black candle AND Ref(downGap,-1)//Gap down yesterday AND whiteBody AND LargeBody AND C>Ref(C,-2)//Large white candle today AND MLY; //Yesterday was the low /* Piercing Line*/ piercingLine= Ref(largeBody,-1) AND Ref(blackBody,-1)AND O<Ref(L,-1) AND C>=(Ref(O,-1)+Ref(C,-1))/2 AND C<Ref(O,-1) AND MLT; /* Stick Sandwich*/ stickSandwich=Ref(largeBody,-2) AND Ref(blackbody,-2) AND Ref(largeBody,-1) AND Ref(whiteBody,-1) AND Ref(O,-1)>=Ref(C,-2) AND O>=Ref(C,-1) AND abs(C-Ref(C,-2))<=C*0.0025; /*Three Inside Up harami confirming*/ threeInsideUp =Ref(Haramibullish,-1) AND whiteBody AND largeBody AND C>Ref(C,-1); /* Three Outside Up Engulfing confirmation*/ threeOutsideUp =Ref(engulfingBullish,-1) AND whiteBody AND C>Ref(C,-1); /* Three Stars in the South*///Rewrite??? threeStarsInTheSouth= Ref(LargeBody,-2) AND Ref(blackBody,-2) AND Ref(largelowerShadow,-2) AND Ref(blackBody,-1) AND Ref(largeLowerShadow,-1) AND Ref(L,-1)>Ref(L,-2) AND blackBody AND smallUpperShadow AND smallLowerShadow AND L>Ref(L,-1) AND H<Ref(H,-1); /* Tri-Star Bullish*/ triStarBullish=Ref(doji,-2) AND Ref(doji,-1) AND doji AND MLY AND Ref(downgap,-1) AND upGap; /* Three River Bottom Bad formula*/ threeriverBottom=Ref(largeBody,-2) AND Ref(blackBody,-2) AND Ref(blackbody,-1) AND Ref(Largelowershadow,-1) AND Ref(O,-1)<Ref(O,-2) AND Ref(C,-1)>Ref(C,-2) AND whiteBody AND C<Ref(C,-1) AND MLY; /* Mat Hold Bullish*/ MAtHoldBullish=Ref(LargeBody,-4) AND Ref(whiteBody,-4)//1st day AND Ref(blackBody,-3) AND Ref(upGap,-3) AND NOT Ref(LargeBody,-3) AND NOT Ref(LargeBody,-2) AND Ref(C,-2)<Ref(C,-3) AND Ref (O,-2)<Ref(O,-3) AND Ref(C,-2)>Ref(O,-4) AND NOT Ref(LargeBody,-1) AND Ref(C,-1)<Ref(C,-2) AND LargeBody AND whiteBody AND C>Ref(C,-4); /*RisingThreeMethods*/ risingThreeMethods=Ref(LargeBody,-4) AND Ref(whiteBody,-4) AND NOT Ref(LargeBody,-3) AND NOT Ref(LargeBody,-2)AND NOT Ref(LargeBody,-1) AND Ref(C,-3)<Ref(C,-4) AND Ref(C,-2)<Ref(C,-3) AND Ref(C,-1)<Ref(C,-2) AND LargeBody AND whitebody AND C>Ref(C,-4); /* Seperating Lines Bullish*/ separatingLinesBullish=Ref(blackBody,-1) AND whiteBody AND LargeBody AND smallLowerShadow AND MHT AND abs(O-Ref(O,-1))<=O*0.0025; /*Side by Side White Lines*/ sideBySideWhiteLines=NOT Ref(smallBody,-2) AND Ref(whiteBody,-2) AND Ref(upGap,-1) AND Ref(whitebody,-1)AND whiteBody AND identicalBodies AND abs(O-Ref(O,-1))<O*0.0025; /*Three White Soldiers*/ threeWhiteSoldiers=NOT Ref(smallbody,-2) AND Ref(whiteBody,-2) AND NOT Ref(smallBody,-1) AND Ref(whiteBody,-1) AND NOT smallBody AND whiteBody AND C>Ref(C,-1) AND Ref(C,-1)>Ref(C,-2) AND Ref(O,-1)>Ref(O,-2) AND Ref(O,-1)<Ref(C,-2) AND O<Ref(C,-1) AND O>Ref(O,-1) AND Ref(smallUpperShadow,-2) AND Ref(smallUpperShadow,-1) AND smallUppershadow AND LLV(L,12)==Ref(L,-2); /*Upside Gap Three Methods not very good*/ upsideGapThreeMethods=Ref(Largebody,-2) AND Ref(whiteBody,-2) AND Ref(LargeBody,-1) AND Ref(whiteBody,-1) AND Ref(upGap,-1) AND blackBody AND O>Ref(O,-1) AND C<Ref(C,-2)AND C>Ref(O,-2) AND MHY; /*Three Line Strike not good signals*/ threeLineStrike=NOT Ref(smallBody,-3) AND NOT Ref(smallBody,-2) AND NOT Ref(smallBody,-1) AND Ref(whiteBody,-3) AND Ref(whiteBody,-2) AND Ref(whiteBody,-1) AND Ref(C,-1)>Ref(C,-2) AND Ref(C,-2)>Ref(C,-3) AND blackBody AND O>Ref(C,-1) AND C<Ref(O,-3); /*Tweezer Bottom*/ tweezerBottom= (abs(L-Ref(L,-1))/L<0.0025 OR abs(L-Ref(L,-2))/L<0.0025) AND (MLT OR MLY); /*Upside Tasuki Gap*/ upsideTasukiGap=Ref(largeBody,-2) AND Ref(largeBody,1) AND Ref(whiteBody,-2) AND Ref(whiteBody,-1) AND Ref(upGap,-1) AND blackBody AND O>Ref(O,-1) AND C<Ref(O,-1) AND C>Ref(C,-2) AND identicalBodies AND O<Ref(C,-1); //AND HHV(H,5)==Ref(H,-1); Do not use this line /***************************************** BEARISH CANDLESTICKS ******************************************/ /*Abandoned Baby Bearish*/ AbandonedBabyBearish=Ref(LargeBody,-2) AND Ref(whiteBody,-2) AND Ref(smallBody,-1) AND Ref(GapUp(),-1) AND GapDown() AND NOT smallBody AND blackBody AND MHY; /*Advance Block Bearish*/ AdvanceBlockBearish=Ref(LargeBody,-2) AND Ref(whiteBody,-2) AND Ref(whiteBody,-1) AND whiteBody AND Ref(O,-1)>Ref(O,-2) AND Ref(O,-1)<Ref(C,-2) AND Ref(C,-1)>Ref(C,-2) AND C>Ref(C,-1) AND O<Ref(C,-1) AND O>Ref(O,-1) AND Ref(LargeUpperShadow,-1) AND LargeUpperShadow AND C-O<Ref(C,-1)-Ref(O,-1) AND Ref(C,-1)-Ref(O,-1) < Ref(C,-2)-Ref(O,-2); /*Belt Hold Bearish*/ beltHoldBearish=LargeBody AND BlackBody AND smalluppershadow AND MHT; /*Breakaway Bearish*/ breakAwayBearish=Ref(LargeBody,-4) AND Ref(whiteBody,-4) AND Ref(GapUp(),-3) AND Ref(whiteBody,-3) AND Ref(smallbody,-2) AND Ref(smallBody,-1) AND blackBody AND O>Ref(O,-3) AND C<Ref(C,-4); /*Dark Cloud Cover*/ darkCloudCover=Ref(LargeBody,-1) AND Ref(whiteBody,-1) AND blackBody AND O>Ref(H,-1) AND C>Ref(O,-1) AND C<(Ref(O,-1)+Ref(C,-1))/2 AND MHT; /*Deliberation Bearish: needs confirmation*/ deliberationBearish=Ref(LargeBody,-2) AND Ref(whiteBody,-2) AND Ref(LargeBody,-1) AND Ref(whiteBody,-1) AND Ref(C,-1)>Ref(C,-2) AND smallbody AND upGap; /*CounterAttackBearish*/ CounterAttackBearish=MHT AND LargeBody AND blackbody AND Ref(largeBody,-1) AND Ref(whiteBody,-1) AND C<Ref(C,-1)*1.0025 AND C>Ref(C,-1)*0.9975;; /*Doji Star Bearish*/ dojiStarBearish=(dojiStar AND (MHT OR MHY))OR (doji AND (C>Ref(C,-1) OR O>Ref(C,-1))AND Ref(whiteBody,-1) AND Ref(LargeBody,-1)); /*Engulfing Bearish*/ engulfingBearish=engulfing AND largeBody AND blackBody AND (Ref(whitebody,-1) OR Ref(Doji,-1))AND (MHT OR MHY); /*Evening Doji Star check formula???*/ eveningDojiStar=Ref(LargeBody,-2) AND Ref(whiteBody,-2) AND Ref(dojiStar,-1) AND Ref(GapUp(),-1) AND (MHY OR MHT); /*Evening Star*/ eveningStar=Ref(LargeBody,-2) AND Ref(whiteBody,-2) AND Ref(upGap,-1) AND NOT Ref(largeBody,-1) AND blackBody AND NOT smallBody AND (MHT OR MHY); /*Hammer Bearish*/ HammerBearish=Hammer AND HHV(H,8)==H; /*hangingMan*/ HangingMan=NOT largeBody AND smallUpperShadow AND LargeLowerShadow AND MHT; /*dragonfly Doji Bearish*/ dragonflyDojiBearish=doji AND smallUpperShadow AND LargeLowerShadow AND MHT; /*Harami Bearish-*/ HaramiBearish=harami AND Ref(Largebody,-1) AND Ref(whiteBody,-1)AND blackBody AND (MHY OR MHT); /*HaramiCross Bearish*/ HaramiCrossBearish=harami AND doji AND Ref(whiteBody,-1) AND Ref(Largebody,-1); /*Identical three black crows*/ idendicalThreeBlackCrows=Ref(blackBody,-2) AND Ref(blackBody,-1) AND blackBody AND abs(Ref(C,-2)-Ref(O,-1))<Ref(C,-1)*0.0025 AND abs(Ref(C,-1)-O)<O*0.0025 AND HHV(H,20)==Ref(H,-2) AND NOT Ref(doji,-2) AND NOT Ref(doji,-1) AND NOT doji AND Ref(smallLowerShadow,-2) AND Ref(smallLowerShadow,-1) AND smallLowerShadow; /*Kicking Bearish No trades*/ kickingBearish=Ref(whiteBody,-1) AND Ref(MArabuzu,-1) AND blackBody AND MArabuzu AND GapDown(); /*Meeting Lines Bearish*/ MeetingLinesBearish=Ref(LargeBody,-1) AND Ref(whiteBody,-1) AND HHV(C,8)==Ref(C,-1) AND LargeBody AND blackBody AND abs(C-Ref(C,-1))<C*0.0025; /*ShootingStar*/ shootingStarGap=shootingStar AND GapUp() AND MHT; /*Gravestone Doji*/ gravestoneDoji=doji AND largeUpperShadow AND smallLowerShadow AND GapUp()AND MHT; /*Three Inside Down Bearish*/ threeInsideDownBearish=Ref(HaramiBearish,-1) AND blackBody AND C<Ref(C,-1)AND smallUpperShadow; /*Three Outside Down Bearish*/ threeoutsideDownBearish=Ref(engulfingBearish,-1) AND blackBody AND C<Ref(C,-1)AND NOT LargeUpperShadow; /*Tri Star Bearish*/ triStarBearish=Ref(doji,-2) AND Ref(doji,-1) AND doji AND MHY AND Ref(upGap,-1)AND downGap; /*Two Crows Bearish*/ twoCrows=Ref(whiteBody,-2) AND Ref(LargeBody,-2) //first day AND Ref(blackBody,-1) AND Ref(upGap,-1)//Second Day AND blackBody AND O<Ref(O,-1) AND O>Ref(C,-1)AND C<Ref(C,-2) AND C>Ref(O,-2) AND MHY;//Third day /*Upside Gap Two Crows*/ upsideGapTwoCrows= Ref(whiteBody,-2) AND Ref(LargeBody,-2)// first day AND Ref(upGap,-1) AND Ref(blackBody,-1) // 2nd day AND blackbody AND O>Ref(O,-1) AND C<Ref(C,-1) AND C>Ref(C,-2); /*Doji Star Bearish needs confirmation dojiStarBearish=Ref(LargeBody,-1) AND Ref(whiteBody,-1) // first day AND doji AND upGap AND MHT;*/ /* Downside Gap Three Methods*/ downsideGapThreeMethods= Ref(LargeBody,-2) AND Ref(blackBody,-2) AND Ref(downGap,-2) //first day AND Ref(LargeBody,-1) AND Ref(blackBody,-1)//2nd day AND whitebody AND O<Ref(O,-1) AND C>Ref(C,-2) AND LLV(L,8)==Ref(L,-1); /*Downside Tasuki Gap*/ downsideTasukiGap= Ref(blackBody,-2)//first day AND Ref(blackbody,-1) AND Ref(downgap,-1) //2nd day AND whiteBody AND O<Ref(O,-1) AND O>Ref(C,-1) AND C>Ref(O,-1) AND C<Ref(C,-2) AND Ref(identicalBodies,-1) AND LLV(L,15)==Ref(L,-1); /*Falling Three Meothods*/ fallingThreeMethods=Ref(LargeBody,-4) AND Ref(blackBody,-4) AND /*Ref(doji,-3) AND Ref(doji,-2) AND Ref(doji,-1) AND*/ Ref(C,-1)>Ref(C,-2) AND Ref(C,-2)>Ref(C,-3) AND LargeBody AND blackBody AND O>Ref(C,-4) AND O<Ref(O,-4) AND C<Ref(O,-4)AND C<Ref(C,-4); /*In Neck Bearish not good*/ inNeckBearish=Ref(LargeBody,-1) AND Ref(blackBody,-1) AND whiteBody AND O<Ref(L,-1) AND C<Ref(C,-1)*1.0005 AND C>=Ref(C,-1); /*On Neck Bearish not good*/ OnNeckBearish=Ref(LargeBody,-1) AND Ref(blackBody,-1) AND whiteBody AND O<Ref(L,-1) AND C<Ref(L,-1)*1.0025 AND C>=Ref(L,-1)*0.9975; /*separating Lines Bearish*/ separatingLinesBearish=Ref(LargeBody,-1) AND Ref(whiteBody,-1) AND blackBody AND O>Ref(O,-1)*0.9975 AND O<=Ref(O,-1)*1.0025; /*Side By Side White Lines Bearish*/ sideBySideWhiteLinesBearish=NOT Ref(smallBody,-2) AND Ref(blackBody,-2) AND Ref(whiteBody,-1) AND whiteBody AND Ref(downGap,-1) AND identicalBodies AND abs(C-Ref(C,-1)<C*0.0025); /*Three Black Crows*/ threeBlackCrows=Ref(blackBody,-2) AND Ref(blackBody,-1) AND blackBody AND Ref(C,-1)<Ref(C,-2) AND C<Ref(C,-1) AND HHV(H,8)==Ref(H,-2) AND NOT Ref(doji,-2) AND NOT Ref(doji,-1) AND NOT doji;; /*Three Line Strike no trades*/ threeLineStrike=threeBlackCrows AND whiteBody AND O<Ref(C,-1) AND C>Ref(O,-3); /*Thrusting Bearish*/ thrustingBearish=Ref(blackBody,-1) AND Ref(LargeBody,-1) AND LargeBody AND whitebody AND O<Ref(L,-1) AND C<(Ref(O,-1)+Ref(C,-1))/2 AND C>Ref(C,-1); /*Tweezer Top*/ tweezerTop= (abs(H-Ref(H,-1))/H<0.0025 OR abs(H-Ref(H,-2))/H<0.0025) AND (MHT OR MHY); /* *********************************************** Buy Rules **************************************************/ Buy= abandonedBabybullish OR beltHoldBullish OR breakAwayBullish OR ConcealingBabySwallow OR engulfingBullish OR hammerBullish OR dragonflyDoji OR dojiStarBullish OR haramiBullish OR HaramiCross OR homingPigeon OR invertedHammer OR meetingLinesbullish OR morningDojiStar OR morningStar OR piercingLine OR stickSandwich OR threeInsideUp OR threeOutsideUp OR threeStarsInTheSouth OR triStarBullish OR threeriverBottom OR MAtHoldBullish OR risingThreeMethods OR separatingLinesBullish OR sideBySideWhiteLines OR threeWhiteSoldiers OR upsideGapThreeMethods OR threeLineStrike OR tweezerBottom OR upsideTasukiGap; /************************************ Sell Rules *************************************/ Sell= AbandonedBabyBearish OR advanceBlockBearish OR beltHoldBearish OR breakAwayBearish OR darkCloudCover OR deliberationBearish OR CounterAttackBearish OR engulfingBearish OR eveningDojiStar OR eveningStar OR HangingMan OR dragonflyDojiBearish OR HammerBearish OR HaramiBearish OR HaramiCrossBearish OR idendicalThreeBlackCrows OR kickingBearish OR MeetingLinesBearish OR shootingStarGap OR gravestoneDoji OR threeInsideDownBearish OR threeoutsideDownBearish OR triStarBearish OR twoCrows OR upsideGapTwoCrows OR dojiStarBearish OR downsideGapThreeMethods OR downsideTasukiGap OR fallingThreeMethods OR inNeckBearish OR OnNeckBearish OR separatingLinesBearish OR sideBySideWhiteLinesBearish OR threeBlackCrows OR threeLineStrike OR thrustingBearish OR tweezerTop; /*************************************** Commentary *************************************** Bullish Candles ****************************************/ WriteIf(Buy,"Bullish\n=======\n","")+ WriteIf(abandonedBabybullish,"Abandoned Baby Bullish. \nA reversal pattern.\n\\c16LiWick reliability : High.","")+ WriteIf(beltHoldBullish,"Belt Hold Bullish. \nA reversal pattern.\nNison:The larger the candlestick, the more significant it is.\nLitWick Reliability: Low.","")+ WriteIf(breakAwayBullish,"Break Away Bullish. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(ConcealingBabySwallow,"Concealing Baby Swallow. \nA reversal pattern.\n LitWick reliability: high.","")+ WriteIf(dojiStarBullish,"Bullish doji Star. A reversal pattern.\nNison: Needs confirmation. Better at calling tops.\nLitWick reliability: moderate.","")+ WriteIf(engulfingBullish,"Bullish Engulfing. \nA reversal pattern.\nNison: Factors increasing the pattern's effectiveness are\n1) The first day has a small real body and the second day has a large real body.\n2) Pattern appears after protracted or very fast move.\n3) Heavy volume on second real body.\n4) The second day engulfs more than one real body.\nLitWick reliability: moderate","")+ WriteIf(hammerBullish,"Bullish Hammer. \nA reversal pattern.\nNison: The longer the lower shadow, the smaller the upper shadow, and the smaller the real body, the more significant the pattern.White real body more bullish than black body.\nLitWick reliability: low.","")+ WriteIf(dragonflyDoji,"Dragonfly Doji. \nLitWick reliability: moderate.","")+ WriteIf(haramiBullish, "Harami Bullish. \nA reversal pattern.\nNison: Less significant. Pattern needs confirmation.\nLitWick reliability: low.","")+ WriteIf(HaramiCross,"Harami Cross. \nA reversal pattern.\nNison: Better indicator than Harami. Better at calling tops than bottoms.\nLitWick reliability: low.","")+ WriteIf(homingPigeon,"Homing Pigeon. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(invertedHammer,"Inverted Hammer. \nA reversal pattern.\nNison:Needs bullish verification.\nLitWick reliability: low.","")+ WriteIf(meetingLinesbullish,"Meeting Lines bullish. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(morningDojiStar,"Morning Doji Star. \nA reversal pattern.\nImportant reversal signal.\nLitWick reliability: high.","")+ WriteIf(morningStar,"Morning Star. \nA reversal pattern.\nNison: The stronger the white third body the better.\nLitWick reliability: high.","")+ WriteIf(piercingLine,"Piercing Line. \nA reversal pattern.\nNison: A stron reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(stickSandwich,"Stick Sandwich. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(threeInsideUp,"3 Inside Up. \nA reversal pattern.\nLitWick reliability: high.","")+ WriteIf(threeOutsideUp,"3 Outside Up. \nA reversal pattern.\nLitWick reliability: high.","")+ WriteIf(threeStarsInTheSouth,"3 Stars in the South. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(triStarBullish,"Tri-Star Bullish. \nA reversal pattern.\nNison: Significant reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(threeriverBottom,"3 River Bottom. \nA reversal pattern.\nNison: Selling pressure drying up.\nLit Wick reliability: moderate.","")+ WriteIf(MAtHoldBullish,"Mat Hold Bullish. \nA continuation pattern.\nNison: May have 2-4 black candles.\nLitWick reliability: high. ","")+ WriteIf(risingThreeMethods,"Rising Three Methods. \nA continuation pattern>\nNison: Has more significance if volume of white candle sticks is greater than on black candlesticks.\nLitWick reliability: high.","")+ WriteIf(separatingLinesBullish,"Separating Lines Bullish. \nA continuation pattern.\nNison: \nLitWick reliability: low.","")+ WriteIf(sideBySideWhiteLines,"Side by Side White Lines. \nA continuation pattern.\nNison: If occurring during a downtrend may only be short covering.\nLitWick reliability: high.","")+ WriteIf(threeWhiteSoldiers,"3 White Soldiers. \nA continuation pattern.\nNison: Positive, but be aware of negative similar stalled pattern and advance block pattern.\nLitWick reliability: high.","")+ WriteIf(upsideGapThreeMethods,"Upside Gap 3 Methods. \nA continuation pattern.\nLitWick reliability: moderate.","")+ WriteIf(threeLineStrike,"3 Line Strike. \nA continuation pattern.\nLitWick reliability: low.","")+ WriteIf(tweezerBottom,"Tweezer Bottom.\nA reversal pattern. With other reversal candles it could indicate a support level.\nNison: Needs confirmation.","")+ WriteIf(upsideTasukiGap,"Upside Tasuki Gap. \nA continuation pattern.\nNison: the real bodies of the two candlesticks in the gap should be about the same size.\nLitWick reliability: moderate.","")+ WriteIf(Buy,"\n-------------------------------------------","");; /*************************************** Bearish Candles ********************************************/ WriteIf(Sell,"Bearish\n=======\n","")+ WriteIf(AbandonedBabyBearish,"Abandoned Baby Bearish. \nA reversal pattern.\nNison: Extremely rare.\nLitWick reliability: high.","")+ WriteIf(advanceBlockBearish,"Advancing Block Bearish. \nA reversal pattern.\nNison: Rally is in trouble. Signs of weakening could be progressively smaller white read bodies or relatibvely long upper shadows on the last two white candlesticks.Not necessarily a reversal pattern.\nLitWick Reliability: moderate.","")+ WriteIf(beltHoldBearish,"Belt Hold Bearish. \nA reversal pattern.\nNison: The longer the height of the belt-hold candle the more significant the pattern.\nLitWick reliability: low.","")+ WriteIf(breakAwayBearish,"Break Away Bearish. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(darkCloudCover,"Dark Cloud Cover. \nA reversal pattern.\nNison: Factors indicating the importance of this signal are/n1)The greater the penetration of the first candle by the second.\n2)Both candles are marabozus.\n3)The second body opens above a major resistance level.\n4)High volume on the second day.\nLitWick Reliability: high.","")+ WriteIf(deliberationBearish,"Deliberation Bearish. \nA reversal pattern.\nNison: Not a reversal pattern, but a sign the rally is weakening.\nLitWick reliability: moderate.","")+ WriteIf(CounterAttackBearish,"Counter Attack Bearish.\nNison: A potential stalling of the rally.","")+ WriteIf(engulfingBearish,"Engulfing Bearish. \nA reversal pattern.\nNison: Major reversal signal. Factors increasing patterns importance are\n1) The first day has a very small real body and the second day a very large real body.\n2) The pattern apears after a protracted or very fast move.\n3) Heavy volume on the second day.\n4) The second day engulfs more than one real body.\nLitWick reliability: moderate.","")+ WriteIf(eveningDojiStar,"Evening Doji Star \nA reversal pattern.\nNison: Must be confirmed by long black candle.\nLit Wick reliability: high","")+ WriteIf(eveningStar,"Evening Star. \nA reversal pattern.\nNison: Gap between Second AND third bodies does NOT always occur.\nLitWick reliability: High.","")+ WriteIf(HammerBearish,"Bearish Hammer. \nA reversal pattern.\nNison: More bearish if hammer is black. Needs bearish confirmation. A large gap down on the following day would be a good confirmation.","")+ WriteIf(HangingMan,"Hanging Man. \nA reversal pattern.\nNison: Same as bearish hammer with a large gap down the following day.\nLitWick reliability: low.","")+ WriteIf(dragonflyDojiBearish,"Dragonfly Bearish. \nA reversal pattern.\nNison: Same as Hanging Man.\nLitWick reliability: moderate.","")+ WriteIf(HaramiBearish,"Harami Bearish. \nA reversal pattern.\nNison: Not as significant a reversal pattern as hanging man or engulfing.\nLitWick reliability: low.","")+ WriteIf(HaramiCrossBearish,"Harami Cross Bearish. \nA reversal pattern.\nNison: More significant reversal pattern than Harami. Second day can be white or black.\nLitWick reliability: moderate.","")+ WriteIf(idendicalThreeBlackCrows,"Identical 3 Black Crows. \nA reversal pattern in an uptrend.\nNison:Very bearish.\nLitWick reliability: high. ","")+ WriteIf(kickingBearish,"Kicking Bearish. \nA reversal pattern.\nLitWick reliability: high.","")+ WriteIf(MeetingLinesBearish,"Meeting Lines Bearish. \nA reversal pattern.\nNison: \nLitWick reliability: moderate, but not as strong as Dark cloud Cover.","")+ WriteIf(shootingStarGap,"Shooting Star. \nA reversal pattern.\nNison:Not major reversal signal as evening star. Ideally real body would gap away from previous body. Needs to appear after an uptrend.\nLitWick reliability: low.","")+ WriteIf(gravestoneDoji,"Gravestone Doji. \nA reversal pattern.\nNison: more significant if it hits new high.\nLitWick reliability: moderate.","")+ WriteIf(threeInsideDownBearish,"3 Inside Down. \nA reversal pattern.\nNison: \nLitWick reliability: high.","")+ WriteIf(threeoutsideDownBearish,"3 Outside Down. \nA reversal pattern.\nLitWick reliability: high.","")+ WriteIf(triStarBearish,"Tri-Star Bearish. \nA reversal pattern.\nNison: Very significant reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(twoCrows,"2 Crows. \nA reversal pattern.\nLitWick reliability: moderate.","")+ WriteIf(upsideGapTwoCrows,"Upside Gap 2 Crows. \nA reversal pattern.\nNison:Needs confirmation of a continued reversal on third day.\nLitWick reliability: high.","")+ WriteIf(dojiStarBearish,"Doji Star Bearish. \nA reversal pattern.\nNison: needs confirmation.\nLitWick reliability: moderate.","")+ WriteIf(downsideGapThreeMethods,"Downside Gap 3 Methods. A continuation pattern.\nNison: \nLitWick reliability: moderate.","")+ WriteIf(downsideTasukiGap,"Downside Tasuki Gap. \nA continuation method.\nNison: If last day closes window, continuation pattern is negated.\nLitWick reliability: moderate.","")+ WriteIf(fallingThreeMethods,"Falling 3 Methods. \nA continuation pattern.\nNison: \nLitWick reliability: high.","")+ WriteIf(inNeckBearish,"In Neck Bearish. A continuatin pattern.\nNison: Similar to piercing pattern but bearish because there is no penetration of second day.\nLitWick reliability: moderate.","")+ WriteIf(OnNeckBearish,"On Neck Bearish. \nA continuation pattern. Similar to piercing pattern but bearish beccause there is no penetration of the second day.\nLitWick reliability: moderate.","")+ WriteIf(separatingLinesBearish,"Separating Lines Bearish",""); WriteIf(sideBySideWhiteLinesBearish,"Side by Side White Lines Bearish. \nA continuation pattern.\nNison: very rare.\nLitWick reliability: moderate.","")+ WriteIf(threeBlackCrows,"3 Black Crows. \nA reversal pattern.\nNison: Need to appear after a mature advance.\nLitWick reliability: high.","")+ WriteIf(threeLineStrike,"3 Line Strike. \nA continuation pattern.\nLitWick reliability: low.","")+ WriteIf(thrustingBearish,"Thrusting. \nA continuation pattern.\nNison: Not a reversal day because second day does not pierce midpoint of first day.\nLitWick reliability: low.","")+ WriteIf(tweezerTop,"Tweezer Top. \nA reversal pattern.\nNison: Needs confirmation.","")+ WriteIf(Sell,"\n---------------------------------------------------",""); /*********************************************** End Commentary ************************************************/ _SECTION_END(); _SECTION_BEGIN("Signal Panel"); sp = ParamToggle("Signal Panel","Show|Hide",1); showsl = ParamToggle("Stop Loss Line", "Show|Hide", 0); no=6; res=HHV(H,no); sup=LLV(L,no); avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0)); avn=ValueWhen(avd!=0,avd,1); s5d=IIf(avn==1,sup,res); ColorSL = IIf(avn==1,colorBrightGreen,colorRed); if (showsl == 1) Plot(s5d,"Stop Loss",ColorSL,styleDots); exitlong = Cross(s5d, H); exitshort = Cross(L, s5d); Buy = exitshort; Sell = exitlong; Buy = ExRem(Buy,Sell); Sell = ExRem(Sell,Buy); PlotShapes(exitlong * shapeDownArrow, colorRed,0,H,-10); PlotShapes(exitshort * shapeUpArrow, colorLime,0,L,-15); AlertIf( Buy, "", "BUY @ " + C, 1 ); AlertIf( Sell, "", "SELL @ " + C, 2 ); for(i=BarCount-1;i>1;i--) { if(Buy[i] == 1) { entry = C[i]; sig = "BUY"; sl = s5d[i]; tar1 = entry + (entry * .0050); tar2 = entry + (entry * .0092); tar3 = entry + (entry * .0179); bars = i; i = 0; } if(Sell[i] == 1) { sig = "SELL"; entry = C[i]; sl = s5d[i]; tar1 = entry - (entry * .0050); tar2 = entry - (entry * .0112); tar3 = entry - (entry * .0212); bars = i; i = 0; } } Offset = 20; Clr = IIf(sig == "BUY", colorLime, colorRed); ssl = IIf(bars == BarCount-1, s5d[BarCount-1], Ref(s5d, -1)); sl = ssl[BarCount-1]; if (sp == 1 ) { Plot(LineArray(bars-Offset, tar1, BarCount, tar1,1), "", Clr, styleLine|styleDots, Null, Null, Offset); Plot(LineArray(bars-Offset, tar2, BarCount, tar2,1), "", Clr, styleLine|styleDots, Null, Null, Offset); Plot(LineArray(bars-Offset, tar3, BarCount, tar3,1), "", Clr, styleLine|styleDots, Null, Null, Offset); Plot(LineArray(bars-Offset, sl, BarCount, sl,1), "", colorDarkRed, styleLine|styleLine, Null, Null, Offset); Plot(LineArray(bars-Offset, entry, BarCount, entry,1), "", colorGreen, styleLine|styleLine, Null, Null, Offset); for (i=bars; i <BarCount;i++) { PlotText(""+sig+"@"+entry, BarCount-2,entry,Null,colorBlue); PlotText("T1@"+tar1,BarCount,tar1,Null,Clr); PlotText("T2@"+tar2,BarCount,tar2,Null,Clr); PlotText ("T3@"+tar3,BarCount,tar3,Null,Clr); } printf("Last " + sig + " Signal came " + (BarCount-bars) + " bars ago"); printf("\n" + sig + " @ : " + entry + "\nStop Loss : " + sl + " (" + WriteVal(IIf(sig == "SELL",entry-sl,sl-entry), 2.2) + ")"+ "\nTarget_1 : " + tar1 + "\nTarget_2 : " + tar2 + "\nTarget_3 : " + tar3); printf("\nCurrent P/L : " + WriteVal(IIf(sig == "BUY",(C-entry),(entry-C)),2.2)); } _SECTION_END(); _SECTION_BEGIN("VSA"); DTL=Param("Linear regression period",60,10,100,10); wbf=Param("WRB factor",1.5,1.3,2.5,.1); nbf=Param("NRB factor",0.7,0.3,0.9,0.1); TL=LinRegSlope(MA(C, DTL),2); Vlp=Param("Volume lookback period",30,20,300,10); Vrg=MA(V,Vlp); St = StDev(Vrg,Vlp); Vp3 = Vrg + 3*st; Vp2 = Vrg + 2*st;; Vp1 = Vrg + 1*st;; Vn1 = Vrg -1*st; Vn2 = Vrg -2*st; rg=(H-L); arg=Wilders(rg,30); wrb=rg>(wbf*arg); nrb=rg<(nbf*arg); Vl=V<Ref(V,-1) AND V<Ref(V,-2); upbar=C>Ref(C,-1); dnbar=C<Ref(C,-1); Vh=V>Ref(V,-1) AND Ref(V,-1)>Ref(V,-2); Cloc=C-L; x=rg/Cloc; x1=IIf(Cloc==0,arg,x); Vb=V>Vrg OR V>Ref(V,-1); ucls=x1<2; dcls=x1>2; mcls=x1<2.2 AND x1>1.8 ; Vlcls=x1>4; Vhcls=x1<1.35; j=MA(C,5); TLL=LinRegSlope(j,40) ; Tlm=LinRegSlope(j,15) ; tls=LinRegSlope(j,5); mp=(H+L)/2; Pp1=Param("NumberOfDays",30,1,200,1); Pp2=Param("VolOfDays",15,1,200,1); numDays = Pp1; dwWideSpread = 1.8; dwNarrowSpread = 0.8; dwSpreadMiddle = 0.5; dwHighClose = 0.7; dwLowClose = 0.3; volNumDays = Pp2; dwUltraHighVol = 2; dwVeryHighVol = 1.75; // was 1.8 dwHighVol = 1.75; // was 1.8 dwmoderateVol = 1.10; // was 1.8 dwLowVol = 0.75; // was 0.8 //////////////////////////////////////////////////////////////////////////////////// // Classify each bar... /////////////////////////////////////////////////////////////////////////////////// upBar = C > Ref(C,-1); downBar = C < Ref(C,-1); spread = H-L; avgRange = Sum(spread, numDays) / numDays; wideRange = spread >= (dwWideSpread * avgRange); narrowRange = spread <= (dwNarrowSpread * avgRange); testHighClose = L + (spread * dwHighClose); testLowClose = L + (spread * dwLowClose); testCloseMiddle = L + (spread * dwSpreadMiddle); upClose = C > testHighClose; downClose = C < testLowClose; middleClose = C >= testLowClose AND C <= testHighClose; avgVolume = EMA(V, volNumDays); highVolume = V > (avgVolume * dwHighVol); moderateVol= V > (avgVolume * dwmoderateVol); veryHighVolume = V > (avgVolume * dwVeryHighVol); ultraHighVolume = V > (avgVolume * dwUltraHighVol); LowVolume = V < (avgVolume * dwLowVol); //////////////////////////////////////////////////////////////////////////////////// // direction and title //////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////// // // Basic patterns... // //////////////////////////////////////////////////////////////////////////////////// upThrustBar = downClose AND H > Ref(H,-1) AND (C == L) AND downClose AND (NOT narrowRange); noDemandBar = narrowRange AND LowVolume AND upBar AND (NOT upClose); //noDemandBar = narrowRange AND LowVolume AND upBar AND (V < Ref(V,-1)) AND (V < Ref(V,-2)); noSupplyBar = narrowRange AND LowVolume AND downBar AND (V < Ref(V,-1)) AND (V < Ref(V,-2)); absorption = Ref(downbar, -1) AND Ref(highVolume, -1) AND upBar; support = Ref(downBar,-1) AND (NOT Ref(downClose,-1)) AND Ref(highVolume,-1) AND upBar; stoppingVolume = Ref(downBar,-1) AND Ref(highVolume,-1) AND C > testCloseMiddle AND (NOT downBar); bullishsign=moderateVol+UpThrustBar;//OR moderateVol+upBar; //rallyEnd = (Ref(highVolume,-1) AND Ref(upBar,-1) AND wideRange AND downBar) OR // (narrowRange AND highVolume AND H > Ref(HHV(H, 250), -1)); //////////////////////////////////////////////////////////////////////////////////// // // Strength and Weakness // //////////////////////////////////////////////////////////////////////////////////// weakness = upThrustBar OR noDemandBar OR (narrowRange AND (H > Ref(H,-1)) AND highVolume) OR (Ref(highVolume,-1) AND Ref(upBar,-1) AND downBar AND (H < Ref(H,-1))); ///////////////////////////////////////////////////////////////////////////////////////////// C1 = Ref(C, -1); uc = C > C1; dc = C <= C1; ud = C > O; dd = C <= O; green = 1; blue = 2; yellow = 3; red = 4; white = 5; VType = IIf(ud, IIf(uc, green, yellow), IIf(dd,IIf(dc, red, blue), white)); /* green volume: up-day and up-close*/ gv = IIf(VType == green, V, 0); /* yellow volume: up-day but down-close */ yv = IIf(VType == yellow, V, 0); /* red volume: down-day and down-close */ rv = IIf(VType == red, V, 0); /* blue volume: down-day but up-close */ bv = IIf(VType == blue, V, 0); uv = gv + bv; uv1 = Ref(uv, -1); /* up volume */ dv = rv + yv; dv1 = Ref(dv, -1); /* down volume */ /* create moving average period parameters */ VolPer = Param("Adjust Vol. MA per.", 34, 1, 255, 1); ConvPer = Param("Adjust Conv. MA per.", 9, 1, 255, 1); /* create triple exponential moving avearges of separate up and down volume moving averages */ MAuv = TEMA(uv, VolPer ); mauv1 = Ref(mauv, -1); MAdv = TEMA(dv, VolPer ); madv1 = Ref(madv, -1); MAtv = TEMA(V, VolPer );//total volume /* Switch for Horizontal lines indicating current level of positive and negative volume for ease in comparing to past highs/lows - toggle via parmameter window */ OscillatorOnly = Param("Show Oscillator Only", 0, 0, 1, 1); CompareBullVolume = Param("Show Bull Level", 1, 0, 1, 1); if(CompareBullvolume AND !OscillatorOnly){ //Plot(SelectedValue(MAuv), "", colorGreen, styleLine); } CompareBearVolume = Param("Show Bear Level", 1, 0, 1, 1); if(CompareBearVolume AND !OscillatorOnly){ //Plot(SelectedValue(MAdv), "", colorRed, styleLine); } /* Volume Segment Switches - toggle via parameter window */ bullvolume = Param("Show Bull Volume", 1, 0, 1, 1); bearvolume = Param("Show Bear Volume", 1, 0, 1, 1); totalvolume = Param("Show Total Volume", 1, 0, 1, 1); /* plot volume lines and histograms if toggled on: */ bearToFront = Param("Show Bear Vol in Front", 0, 0, 1, 1); if(bearToFront AND !OscillatorOnly){ //Plot(MAdv, "", colorRed, styleHistogram|styleNoLabel); } if(bullvolume AND !OscillatorOnly){ //Plot(MAuv, "Average Bull Volume", colorGreen, styleHistogram|styleNoLabel); } if(bearvolume AND !OscillatorOnly){ //Plot(MAdv, "Average Bear Volume", colorRed, styleHistogram|styleNoLabel); } if(totalVolume AND !OscillatorOnly){ //Plot(MAtv, "Total Volume", colorWhite, styleHistogram|styleNoLabel); //Plot(MAtv, "", colorWhite, styleLine); } if(bullvolume AND !OscillatorOnly){ //Plot(MAuv, "", colorGreen, styleLine); } if(bearvolume AND !OscillatorOnly){ //Plot(MAdv, "", colorRed, styleLine); } /* better visibility of zero line: */ //Plot(0, "", colorBlue, 1); /* Rise/Fall Convergence variables: */ Converge = (TEMA(MAuv - MAdv, ConvPer)); Converge1 = Ref(Converge, -1); ConvergeUp = Converge > Converge1; ConvergeOver = Converge > 0; rising = ConvergeUp AND ConvergeOver; falling = !ConvergeUp AND ConvergeOver; /* Rise/Fall Convergence Oscillator Switch - toggle via parameter window - (provides a better view of resulting combination of battling bull/bear volume forces) */ convergenceOscillator = Param("Show Oscillator", 0, 0, 1, 1); if(convergenceOscillator OR OscillatorOnly){ //Plot(Converge, "Bull/Bear Volume Convergence/Divergence", colorViolet,1|styleLeftAxisScale|styleNoLabel|styleThick); //Plot(0,"", colorYellow, 1|styleLeftAxisScale|styleNoLabel); } /******************************************************** Convergence Rise/Fall Shadows: (provides a more easily visible display of rising and falling bull/bear volume convergence) - toggle via parameter window -posiitive Volume exceeding negative Volume: Light shadow -negative volume exceeding positive volume: dark shadow -if you use standard gray background - best shadows are: -my greys: 14 = (216, 216, 216); 15 = (168, 168, 168)); -best substitute? using AB color constants? -light: colorpalegreen; dark: colorRose;? -(depends on your color scheme - customize to your tastes) **********************************************************/ /* uncomment if you use my custom color greys: */ riseFallColor = IIf(rising, 14,15); //my custom shadow greys /* comment out if you use my custom color gray shadows: */ /* riseFallColor = IIf(rising, colorPaleGreen,colorRose); */ /* Rise/Fall Convergence Plot Switch - toggle via parameter window */ riseFallShadows = Param("Show RiseFallShadows", 0, 0, 1, 1); if(riseFallShadows){ //Plot(IIf(rising OR falling, 1, 0), "", riseFallColor,styleHistogram|styleArea|styleOwnScale|styleNoLabel); } _SECTION_END(); _SECTION_BEGIN("Pivot Finder"); /*********************************** Code to automatically identify pivots ***********************************/ // -- what will be our lookback range for the hh and ll? farback=Param("How Far back to go",100,50,5000,10); nBars = Param("Number of bars", 12, 5, 40); //"BIdxJJJ = " + BarIndex() + "\n" + "OGGGGGGGGGGG = " + O + "\n"+"H = "+ H + "\n"+"L = " + L + "\n"+"C " ; GraphXSpace=7; // -- Create 0-initialized arrays the size of barcount aHPivs = H - H; aLPivs = L - L; // -- More for future use, not necessary for basic plotting aHPivHighs = H - H; aLPivLows = L - L; aHPivIdxs = H - H; aLPivIdxs = L - L; nHPivs = 0; nLPivs = 0; lastHPIdx = 0; lastLPIdx = 0; lastHPH = 0; lastLPL = 0; curPivBarIdx = 0; aHHVBars = HHVBars(H, nBars); aLLVBars = LLVBars(L, nBars); aHHV = HHV(H, nBars); aLLV = LLV(L, nBars); aVisBars = Status("barvisible"); nLastVisBar = LastValue(Highest(IIf(aVisBars, BarIndex(), 0))); _TRACE("Last visible bar: " + nLastVisBar); // -- Initialize value of curTrend curBar = (BarCount-1); curTrend = ""; if (aLLVBars[curBar] < aHHVBars[curBar]) { curTrend = "D"; } else { curTrend = "U"; } if (BarCount > farback) { for (i=0; i<farback; i++) { curBar = (BarCount - 1) - i; // -- Have we identified a pivot? If trend is down... if (aLLVBars[curBar] < aHHVBars[curBar]) { // ... and had been up, this is a trend change if (curTrend == "U") { curTrend = "D"; // -- Capture pivot information curPivBarIdx = curBar - aLLVBars[curBar]; aLPivs[curPivBarIdx] = 1; aLPivLows[nLPivs] = L[curPivBarIdx]; aLPivIdxs[nLPivs] = curPivBarIdx; nLPivs++; } // -- or current trend is up } else { if (curTrend == "D") { curTrend = "U"; curPivBarIdx = curBar - aHHVBars[curBar]; aHPivs[curPivBarIdx] = 1; aHPivHighs[nHPivs] = H[curPivBarIdx]; aHPivIdxs[nHPivs] = curPivBarIdx; nHPivs++; } // -- If curTrend is up...else... } // -- loop through bars } } curBar = (BarCount-1); candIdx = 0; candPrc = 0; lastLPIdx = aLPivIdxs[0]; lastLPL = aLPivLows[0]; lastHPIdx = aHPivIdxs[0]; lastHPH = aHPivHighs[0]; if (lastLPIdx > lastHPIdx) { // -- Bar and price info for candidate pivot candIdx = curBar - aHHVBars[curBar]; candPrc = aHHV[curBar]; if ( lastHPH < candPrc AND candIdx > lastLPIdx AND candIdx < curBar) { // -- OK, we'll add this as a pivot... aHPivs[candIdx] = 1; // ...and then rearrange elements in the // pivot information arrays for (j=0; j<nHPivs; j++) { aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs- (j+1)]; aHPivIdxs[nHPivs-j] = aHPivIdxs[nHPivs-(j+1)]; } aHPivHighs[0] = candPrc ; aHPivIdxs[0] = candIdx; nHPivs++; } } else { // -- Bar and price info for candidate pivot candIdx = curBar - aLLVBars[curBar]; candPrc = aLLV[curBar]; if ( lastLPL > candPrc AND candIdx > lastHPIdx AND candIdx < curBar) { // -- OK, we'll add this as a pivot... aLPivs[candIdx] = 1; for (j=0; j<nLPivs; j++) { aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)]; aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)]; } aLPivLows[0] = candPrc; aLPivIdxs[0] = candIdx; nLPivs++; } } //PlotShapes(IIf(aHPivs==1,shapeDownArrow, shapeNone), colorRed, 0,High, Offset=-15); //PlotShapes(IIf(aLPivs==1,shapeUpArrow , shapeNone), ColorRGB(168,255,0), 0, Low, Offset=-15); //printf("\n Buuuy pivotss %g", aLPivs); //printf("\n Seel pivotss %g \n",aHPivs); IIf( (aHPivs==1 AND aLPivs==0),PIVOT_SELL = 5, PIVOT_SELL = 0 ); IIf( aLPivs==1 AND aHPivs==0, PIVOT_BUY = 0, PIVOT_BUY = 5 ); PIVOT_BUY = IIf(aLPivs==1, 5, 0); PIVOT_SELL = IIf(aHPivs==1, 5, 0); //printf("\n Buy pivots %g", PIVOT_BUY); //printf("\n Sell pivots %g \n",PIVOT_SELL); PIVOT_status = WriteIf(PIVOT_BUY,"Buy["+PIVOT_BUY+"]",WriteIf(PIVOT_SELL,"Sell["+PIVOT_SELL+"]","NA")); PIVOT_col = IIf (PIVOT_BUY,colorGreen, IIf (PIVOT_SELL,colorRed,colorLightGrey)); _SECTION_END(); /********************************************************** /ADX ***********************************************************/ range = Param("Range",14,3,60,1); px = PDI(range); nx = MDI(range); ax = ADX(range); Line_Control = 20; up_adx = Ref(ADX(range),-1) < ADX(range); dw_adx = Ref(ADX(range),-1) > ADX(range); // ADX Trends Notrend = ADX(range) < 20; ModerateTrend = ADX(range) >= 20 AND ADX(range) < 40 AND up_adx ; StrongTrend = ADX(range) >= 40 AND ADX(range) < 60 AND up_adx ; VeryStrongTrend = ADX(range) >= 60 AND ADX(range) < 80 AND up_adx ; ExtremelyStrongTrend = ADX(range) >= 80 AND up_adx ; // Buy Conditions bcon1 = Cross(px,ax) AND nx < px AND ax > Ref(ax,-1); scon1 = Cross(nx,ax) AND px < nx AND ax > Ref(ax,-1); adbuy = ax < 20 AND ax > Ref(ax,-1) AND ( Cross(px,nx) OR nx < px) ; adsell = ax < 20 AND ax > Ref(ax,-1) AND ( Cross(nx,px) OR nx > px) ; adbuy1 = Cross(px,ax) AND nx < px AND ax > Ref(ax,-1) AND px > ax; adsell1 = Cross(nx,ax) AND nx > px AND ax > Ref(ax,-1) AND nx > ax; BUY_ADX = bcon1 + adbuy + adbuy1; SELL_ADX = scon1 + adsell + adsell1; ADX_status = WriteIf(BUY_ADX,"Buy["+BUY_ADX+"]",WriteIf(SELL_ADX,"Sell["+SELL_ADX+"]","NA")); ADX_col = IIf (BUY_ADX,colorGreen, IIf (SELL_ADX,colorRed,colorLightGrey)); /********************************************************** /MACD Cross ***********************************************************/ _SECTION_BEGIN("MACD"); MACD_TOGGLE = ParamToggle("Plot MACD","Off|On",0); r1 = Param( "Fast avg", 12, 2, 200, 1 ); r2 = Param( "Slow avg", 26, 2, 200, 1 ); r3 = Param( "Signal avg", 9, 2, 200, 1 ); m1 = MACD(r1, r2); s1 = Signal(r1,r2,r3); difference = m1-s1; mycolor=IIf(m1<0 AND m1>s1,51,IIf(m1>0 AND m1>s1,colorBrightGreen,IIf(m1>0 AND m1<s1,colorLightOrange,colorRed))); // ********************** //MACD crossing zero B_MACD_0 = Cross(MACD(r1, r2),0); S_MACD_0 = Cross(0,MACD(r1, r2)); // ********************** //Bullish - Bearish MACD crossing signal above zero or below zero plane BULL_CROSS_ABOVE_ZERO = Cross (MACD(r1, r2),Signal(r1,r2,r3)) AND MACD(r1, r2) > 0; BEAR_CROSS_ABOVE_ZERO = Cross (Signal(r1,r2,r3),MACD(r1, r2)) AND MACD(r1, r2) > 0; // ********************** //bELOW ZERO Bullish - Bearish MACD crossing signal above zero or below zero plane BULL_CROSS_BELOW_ZERO = Cross (MACD(r1, r2),Signal(r1,r2,r3)) AND MACD(r1, r2)<0; BEAR_CROSS_BELOW_ZERO = Cross(Signal(r1,r2,r3),MACD(r1, r2)) AND MACD(r1, r2)<0; // ********************** //Zero line reject ZLR BEAR_ZLR = BarsSince(B_MACD_0); BEAR_ZLR1 = (BEAR_ZLR < 6) AND (S_MACD_0); BULL_ZLR = BarsSince(S_MACD_0); BULL_ZLR1 = (BULL_ZLR < 6) AND (B_MACD_0); // ********************** //HOOKS BULL_HOOK1 = BarsSince(BEAR_CROSS_ABOVE_ZERO); BULL_HOOK = (BULL_HOOK1<6) AND BULL_CROSS_ABOVE_ZERO ; BEAR_HOOK1 = BarsSince(BULL_CROSS_ABOVE_ZERO); BEAR_HOOK = (BEAR_HOOK1<6) AND BEAR_CROSS_ABOVE_ZERO ; BUY_MACD = B_MACD_0 + BULL_CROSS_ABOVE_ZERO + BULL_CROSS_BELOW_ZERO + BULL_ZLR1 + BULL_HOOK; SELL_MACD = S_MACD_0 + BEAR_CROSS_ABOVE_ZERO + BEAR_CROSS_BELOW_ZERO + BEAR_ZLR1 + BEAR_HOOK; _SECTION_END(); BUY_MACD = B_MACD_0 + BULL_CROSS_ABOVE_ZERO + BULL_CROSS_BELOW_ZERO + BULL_ZLR1 + BULL_HOOK ; SELL_MACD = S_MACD_0 + BEAR_CROSS_ABOVE_ZERO + BEAR_CROSS_BELOW_ZERO + BEAR_ZLR1 + BEAR_HOOK ; MACD_status = WriteIf(BUY_MACD,"Buy["+BUY_MACD+"]",WriteIf(SELL_MACD,"Sell["+SELL_MACD+"]","NA")); MACD_col = IIf (BUY_MACD,colorGreen, IIf (SELL_MACD,colorRed,colorLightGrey)); /************************************************** Stochastics ***************************************************/ _SECTION_BEGIN("STOCHASTICS"); STOC_TOGGLE = ParamToggle("Plot STOCHASTICS","Off|On",0); SP = Param( "Periods", 10, 1, 200, 1 ); Ksmooth = Param( "%K avg", 5, 1, 200, 1 ); Dsmooth = Param( "%D avg", 5, 1, 200, 1 ); StochDval = StochD( SP , Ksmooth, DSmooth ); StochKval = StochK( SP , Ksmooth); Overbought = 80; Oversold = 20; /* if(STOC_TOGGLE==1) { GraphX = 5; Plot( StochD( SP , Ksmooth, DSmooth), _DEFAULT_NAME(), ParamColor( "ColorD", colorTurquoise ), ParamStyle("Style") ); Plot( StochK( SP , Ksmooth), _DEFAULT_NAME(), ParamColor( "ColorK", colorPaleGreen ), ParamStyle("Style") ); Plot(Overbought,"Overbought Level",colorRed); Plot(Oversold,"Oversold Level",colorGreen); } */ StochBuy = Cross(StochK(SP,Ksmooth), StochD(SP,Ksmooth, DSmooth)) AND (StochD(SP,Ksmooth, DSmooth) > 20) AND (StochK(SP,Ksmooth) > 20) AND (StochD(SP,Ksmooth, DSmooth) < 80) AND (StochK(SP,Ksmooth) < 80); StochSell = Cross (StochD(SP,Ksmooth, DSmooth), StochK(SP,Ksmooth)) AND (StochD(SP,Ksmooth, DSmooth) > 20) AND (StochK(SP,Ksmooth) > 20) AND (StochD(SP,Ksmooth, DSmooth) < 80) AND (StochK(SP,Ksmooth) < 80); StochStrongBuy = Cross(StochK(SP,Ksmooth),StochD(SP,Ksmooth, DSmooth)) AND (StochD(SP,Ksmooth, DSmooth) < 20) AND (StochK(SP,Ksmooth) < 20) ; StochStrongSell = Cross (StochD(SP,Ksmooth,DSmooth), StochK(SP , Ksmooth)) AND (StochD(SP,Ksmooth, DSmooth) > 80) AND (StochK(SP,Ksmooth) > 80); BUY_STOCH = StochBuy + StochStrongBuy; SELL_STOCH = StochSell + StochStrongSell; printf("Sto %g",BUY_STOCH); _SECTION_END(); STOCH_status = WriteIf(BUY_STOCH,"Buy["+BUY_STOCH+"]",WriteIf(SELL_STOCH,"Sell["+SELL_STOCH+"]","NA")); STOCH_col = IIf (BUY_STOCH,colorGreen, IIf (SELL_STOCH,colorRed,colorLightGrey)); /************************************************** TREND DETECTOR ***************************************************/ _SECTION_BEGIN("Trend Detector"); TREND_TOGGLE = ParamToggle("Plot Trend","Off|On",0); A = (H+C+L)/3; B=MA(A,5)-EMA(A,34); D = EMA(A,34)-MA(A,5); Bcolor=IIf(B>D,25,39); Dcolor=IIf(D<B,25,39); Up = B > D; down = B < D; TREND_B = Cross(B,D); TREND_S = Cross(D,B); if(TREND_TOGGLE==1) { Plot(B,"B ",Bcolor,styleLine|styleThick); Plot(D,"D ",Dcolor,styleLine|styleThick); Plot(B,"",Bcolor,styleHistogram|styleThick); Plot(D,"",Dcolor,styleHistogram|styleThick); Plot(0,"",colorWhite,styleLine); PlotShapes(IIf(TREND_S, shapeHollowDownArrow , shapeNone), colorRed,0,0,-8); PlotShapes(IIf(TREND_B, shapeHollowUpArrow , shapeNone), colorGreen,0,0,-8); } _SECTION_END(); TREND_status = WriteIf(TREND_B,"Buy",WriteIf(TREND_S ,"Sell","NA")); TREND_col = IIf (TREND_B,colorGreen, IIf (TREND_S ,colorRed,colorLightGrey)); /************************************************** RSI ***************************************************/ _SECTION_BEGIN("RSI"); Rperiods = Param( "Periods", 14, 1, 200, 1 ); OB = Param("OverBrought Line",70,70,100,1); OS = Param("OverSold Line",30,20,40,1); CentreRSI = 50; Overbought = OB; Oversold = OS; RSI_PERIODS = Prec(RSI( Rperiods),1); //******* RSI Cross 30 or 70**// B_RSI = RSI_CROSS_30 = Cross(RSI_PERIODS,OS); S_RSI = RSI_CROSS_70 = Cross(OB,RSI_PERIODS); //******* RSI < 30 or > 70**// RSI_BELOW_30 = RSI_PERIODS < OS ; RSI_ABOVE_70 = RSI_PERIODS > OB ; //******* RSI > OR < IN LAST 14 DAYS***// RSI_14_GREATEST = RSI_PERIODS>=HHV( RSI_PERIODS, 14); RSI_14_LOWEST = RSI_PERIODS<=LLV( RSI_PERIODS, 14); //******* RSI DIVERGENCE***// RSI_BEAR_DIV = Close >= HHV( Close, 14 ) AND RSI_PERIODS < HHV( RSI_PERIODS, 14 ); RSI_BULL_DIV = RSI_PERIODS >= HHV( RSI_PERIODS, 14 ) AND Close < HHV( Close, 14 ); RSI_BULL_DIV1 = Close <= LLV( Close, 14 ) AND RSI_PERIODS > LLV(RSI_PERIODS, 14 ); RSI_BEAR_DIV1 = RSI_PERIODS <= LLV( RSI_PERIODS, 14) AND Close > LLV(Close,14); /*****///////// RSI_BUY = B_RSI ; RSI_SELL =S_RSI ; _SECTION_END(); RSI_status = WriteIf(RSI_BUY,"Buy["+RSI_BUY+"]",WriteIf(RSI_SELL,"Sell["+RSI_SELL+"]","NA")); RSI_col = IIf (RSI_BUY,colorGreen, IIf (RSI_SELL,colorRed,colorLightGrey)); /************************************************** OBV ***************************************************/ _SECTION_BEGIN("OBV"); MA_OBV_Period = Param("OBV_MA Period",10,10,21,1); /***********OBV CROSS MA************/ OBV_BUY = Cross(OBV(),MA(OBV(),MA_OBV_Period)); OBV_SELL = Cross(MA(OBV(),MA_OBV_Period),OBV()); _SECTION_END(); OBV_status = WriteIf(OBV_BUY,"Buy",WriteIf(OBV_SELL,"Sell","NA")); OBV_col = IIf (OBV_BUY,colorGreen, IIf (OBV_SELL,colorRed,colorLightGrey)); /************************************************** TSV = SIMILAR TO WORDEN ***************************************************/ _SECTION_BEGIN("TSV"); Period = Param("Period for FVE", 22, 5, 80, 1 ); Coeff = Param("Coeff for Cutoff", 0.1, 0, 2, 0.01 ); intra=log(H)-log(L); Vintra = StDev(intra, period ); inter = log(Avg)-log(Ref(Avg,-1)); Vinter = StDev(inter,period); Cutoff = Coeff * (Vinter+Vintra)*C; MF = C- (H+L)/2 + Avg - Ref( Avg, -1 ); VC = IIf( MF > Cutoff, V, IIf( MF < -Cutoff, -V, 0 )); FVE = 100 * Sum( VC, Period )/(MA( V, Period ) * Period ); // Momemtum Indicator by William Blau TSI = 100 * ( EMA( EMA( C - Ref( C, -1 ) ,25 ) ,13) / EMA( EMA( abs( C - Ref( C, -1) ),25 ), 13 ) ); TSI_BUY = Cross(TSI,EMA(TSI,7)); TSI_SELL = Cross(EMA(TSI,7),TSI); _SECTION_END(); TSI_status = WriteIf(TSI_BUY,"Buy",WriteIf(TSI_SELL,"Sell","NA")); TSI_col = IIf (TSI_BUY,colorGreen, IIf (TSI_SELL,colorRed,colorLightGrey)); /************************************************** TRIX ***************************************************/ _SECTION_BEGIN("TRIX"); // TRIX - 15 Periods, 9 Signal Periods tPeriods = Param("Periods", 15, 2, 100, 1 ); tSig = Param("Signal", 9, 2, 100, 1); Zero = 0; TRIX_VAL = Trix(tPeriods); SIG_TRIX = EMA(Trix(tPeriods),tSig); /***********TRIX & Signal Line cross ************/ TRIX_SIGNAL_BUY = Cross(TRIX_VAL, SIG_TRIX) AND TRIX_VAL < 0; TRIX_SIGNAL_SELL = Cross(SIG_TRIX, TRIX_VAL)AND TRIX_VAL > 0; /***********TRIX & Zero Line cross ************/ TRIX_ZERO_BUY = Cross(TRIX_VAL, Zero); TRIX_ZERO_SELL = Cross(Zero, TRIX_VAL); TRIX_BUY = TRIX_SIGNAL_BUY + TRIX_ZERO_BUY; TRIX_SELL = TRIX_SIGNAL_SELL + TRIX_ZERO_SELL; _SECTION_END(); TRIX_status = WriteIf(TRIX_BUY,"Buy",WriteIf(TRIX_SELL,"Sell","NA")); TRIX_col = IIf (TRIX_BUY,colorGreen, IIf (TRIX_SELL,colorRed,colorLightGrey)); /************************************************ Gap *************************************************/ GAP_UP = GapUp(); GAP_DW = GapDown(); GAP_status = WriteIf(GAP_UP,"Buy",WriteIf(GAP_DW ,"Sell","NA")); GAP_col = IIf (GAP_UP,colorGreen, IIf (GAP_DW ,colorRed,colorLightGrey)); /************************************************ Total of Bullish/Bearish *************************************************/ Total_Buy = PIVOT_BUY + BUY_ADX + BUY_MACD + BUY_STOCH+ TREND_B + GAP_UP + RSI_BUY + OBV_BUY + TSI_BUY + TRIX_BUY; Total_Sell = PIVOT_SELL + SELL_ADX + SELL_MACD + SELL_STOCH + TREND_S + GAP_DW + RSI_SELL + OBV_SELL +TSI_SELL+TRIX_SELL; printf("B OIVOTS %g\n",PIVOT_BUY); printf("SELL PIVOTS %g\n",PIVOT_SELL); printf("BUY GAP %g\n",TREND_B); printf("BUY TREND %g\n",GAP_UP); printf("BUY RSI %g\n",B_RSI + RSI_14_GREATEST + RSI_BULL_DIV1 + RSI_BULL_DIV); _SECTION_BEGIN("Chart Settings"); SetChartOptions(0,chartShowArrows|chartShowDates); SetChartBkColor(ParamColor("Outer Panel",colorPaleBlue)); SetChartBkGradientFill(ParamColor("Upper Chart",colorDarkGrey),ParamColor("Lower Chart",colorDarkGrey)); GraphXSpace=Param("GraphXSpace",10,0,100,1); dec = (Param("Decimals",2,0,7,1)/10)+1; bi = BarIndex(); Lbi = LastValue(BarIndex()); sbi = SelectedValue(bi); x1= BarCount-1; Title = EncodeColor(55)+ Name() + " " + EncodeColor(32) + Date() + " " + EncodeColor(5) + "{{INTERVAL}} " + EncodeColor(55)+ " Open = "+ EncodeColor(52)+ WriteVal(O,dec) + EncodeColor(55)+ " High = "+ EncodeColor(5) + WriteVal(H,dec) + EncodeColor(55)+ " Low = "+ EncodeColor(32)+ WriteVal(L,dec) + EncodeColor(55)+ " Close = "+ EncodeColor(52)+ WriteVal(C,dec)+ EncodeColor(55)+ " Volume = "+ EncodeColor(52)+ WriteVal(V,1) + "\n" + EncodeColor(colorYellow) + "----------------------------------------" + "\n"+EncodeColor(colorGold)+ " Analysis " +"\n"+EncodeColor(colorYellow) +"----------------------------------------" ///// PIVOTS + "\n" +EncodeColor(colorWhite)+"PIVOTS = " + WriteIf (aLPivs,EncodeColor(ColorRGB(168,255,0))+" BUY("+PIVOT_BUY+")",WriteIf (aHPivs,EncodeColor(colorRed)+ " SELL("+PIVOT_SELL+")","Neutral")) ///// ADX + "\n"+EncodeColor(colorWhite)+"ADX = " + WriteIf (BUY_ADX,EncodeColor(ColorRGB(168,255,0))+"BUY("+BUY_ADX+")",WriteIf (SELL_ADX,EncodeColor(colorRed)+ " SELL("+SELL_ADX+")","Neutral")) ///// MACD + "\n" +EncodeColor(colorWhite)+"MACD "+"["+r1+"]"+" " +"["+r2+"]"+" " +"["+r3+"] = " + WriteIf (BUY_MACD,EncodeColor(ColorRGB(168,255,0))+"BUY("+BUY_MACD+")",WriteIf (SELL_MACD,EncodeColor(colorRed)+ "SELL("+SELL_MACD+")","Neutral")) ///// STOChASTICS +"\n"+EncodeColor(colorWhite)+"Stochastics = " + WriteIf(BUY_STOCH,EncodeColor(ColorRGB(168,255,0))+"BUY ("+BUY_STOCH+")",WriteIf(SELL_STOCH,EncodeColor(colorRed)+"SELL("+SELL_STOCH+")","Neutral")) ///// RSI +"\n" + EncodeColor(colorWhite)+"RSI"+"("+Rperiods+") = " +WriteIf(B_RSI,EncodeColor(ColorRGB(168,255,0))+"BUY("+RSI_BUY+")",WriteIf (S_RSI,EncodeColor(colorRed)+"SELL("+RSI_SELL+")","Neutral")) ///// OBV +"\n" +EncodeColor(colorWhite)+"OBV = "+ WriteIf(OBV_BUY,EncodeColor(ColorRGB(168,255,0))+"BUY(1)",WriteIf(OBV_SELL,EncodeColor(colorRed)+"SELL(1)",""))+ WriteIf(NOT OBV_BUY AND NOT OBV_SELL,"No Cross","") ///// TSV +"\n" +EncodeColor(colorWhite)+"TSV = " + WriteIf(TSI_BUY,EncodeColor(ColorRGB(168,255,0))+"BUY(1)", WriteIf(TSI_SELL,EncodeColor(colorRed)+"SELL(1)",""))+ WriteIf(NOT TSI_BUY AND NOT TSI_SELL,EncodeColor(colorAqua)+"NA","") ///// TRIX +"\n" +EncodeColor(colorWhite)+"TRIX "+ "("+tPeriods+") "+"(" +tSig+ ") = " +EncodeColor(ColorRGB(168,255,0))+ WriteIf (TRIX_BUY, "BUY ("+TRIX_BUY+")","") +EncodeColor(colorRed)+ WriteIf (TRIX_SELL, "SELL("+TRIX_SELL+")","") +EncodeColor(colorAqua)+ WriteIf (NOT TRIX_SELL AND NOT TRIX_BUY, "No Cross","") ///// TREND +"\n" +EncodeColor(colorWhite)+"Trend = " +WriteIf(Up AND NOT TREND_B,EncodeColor(ColorRGB(168,255,0))+"Up ",WriteIf(Up AND TREND_B,EncodeColor(colorBrightGreen)+ "BUY(1)", WriteIf(Down AND NOT TREND_S,EncodeColor(colorRed)+"Down",WriteIf(Down AND TREND_S,EncodeColor(colorRed)+"SELL(1)",".")))) ///// GAPS +"\n"+EncodeColor(colorWhite)+"GAP = " +WriteIf(GAP_UP,EncodeColor(ColorRGB(168,255,0))+"UP (1)",WriteIf(GAP_DW,EncodeColor(colorRed)+"DOWN (1)", EncodeColor(colorAqua)+"Neutral")) +"\n"+EncodeColor(colorPink) +"=======================" +"\n"+EncodeColor((ColorRGB(242,157,255)))+"BUY = "+EncodeColor(colorYellow)+Total_Buy +"\n"+EncodeColor((ColorRGB(242,157,255)))+"SELL = "+EncodeColor(colorYellow)+Total_Sell +"\n"+EncodeColor(colorPink) +"----------------------------------------" +"\n"+EncodeColor(07)+"Volume: "+WriteIf(V>Vp2,EncodeColor(colorLime)+"Very High",WriteIf(V>Vp1,EncodeColor(colorLime)+" High",WriteIf(V>Vrg,EncodeColor(colorLime)+"Above Average", WriteIf(V<Vrg AND V>Vn1,EncodeColor(colorRed)+"Less than Average",WriteIf(V<Vn1,EncodeColor(colorRed)+"Low",""))))) +"\n"+EncodeColor(colorYellow)+"Spread: "+WriteIf(rg >(arg*2),EncodeColor(colorLime)+" Wide",WriteIf(rg>arg,EncodeColor(colorLime)+" Above Average",EncodeColor(colorRed)+" Narrow")) +"\n"+(EncodeColor(colorYellow)+"Close: ")+WriteIf(Vhcls,EncodeColor(colorLime)+"Very High",WriteIf(ucls,EncodeColor(colorLime)+"High",WriteIf(mcls,EncodeColor(colorYellow)+"Mid", WriteIf(dcls,EncodeColor(colorRed)+"Down","Very Low")))) +"\n"+EncodeColor(colorYellow) + "Zone : " +WriteIf(rising , EncodeColor(colorBrightGreen) + "Accumulation",WriteIf(falling , EncodeColor(colorCustom12) + "Distirbution",EncodeColor(colorAqua) + "Flat")) + " " +"\n"+EncodeColor(colorYellow) + "Status : " + WriteIf(Weakness , EncodeColor(colorRed) + "Weak", WriteIf(stoppingVolume , EncodeColor(colorCustom12) + "StoppingVol", WriteIf(noSupplyBar , EncodeColor(colorLightOrange) + "NoSupply", WriteIf(support , EncodeColor(colorLightBlue) + "SupportVol", WriteIf(noDemandBar , EncodeColor(colorPink) + "NoDemand", WriteIf(absorption, EncodeColor(colorSkyblue) + "Absorption", WriteIf(upThrustBar, EncodeColor(colorBlue) + "Upthrust", WriteIf(bullishsign, EncodeColor(colorPaleGreen) + "STRONG", EncodeColor(colorTan) + "Neutral")))))))) + " " +"\n"+EncodeColor(colorPink)+"----------------------------------------"; _SECTION_END(); //======================================================================== SetChartOptions(2,chartShowArrows|chartShowDates|chartWrapTitle); SetChartOptions(0,chartShowArrows|chartShowDates); //GfxGradientRect( 180, 30, 1759, 735, ColorRGB(40,40,40), ColorRGB(0,0,40) ); GfxSetOverlayMode(1); //GfxSelectPen( ColorRGB(150,0,0), 1 ); GfxSelectSolidBrush( ColorRGB(0,0,40) ); //GfxRectangle=( 0,750, 1807, 35 ); //GfxSelectPen( ColorRGB(150,0,0), 2 ); GfxSelectSolidBrush( ColorRGB(65,65,65) ); //GfxPolygon(250,200,200,250,250,20,200,50); //GfxSelectPen( ColorRGB(125,0,0), 1 ); //GfxSelectSolidBrush( ColorRGB(0,0,40) ); //GfxRectangle( 10,100, 190, 160 ); //GfxSelectPen=( ColorRGB(0,0,0) ,1 ); GfxSelectSolidBrush( ColorRGB(0,0,0) ); //GfxSetTextAlign( 250 );// center alignment GfxSetOverlayMode(1); //GfxSelectFont=("Times New Roman", 30, 400, True ); GfxSetTextColor( ColorRGB( 105, 105, 105 ) ); GfxSetBkMode(0); // transparent //GfxTextOut=("Pathfinder", 15 , 35 ); _SECTION_BEGIN("Flower"); si=Param("Zoom/In Out",5,-50,100,1); GraphXSpace=si; r1 = Param( "ColorFast avg", 5, 2, 200, 1 ); r2 = Param( "ColorSlow avg", 10, 2, 200, 1 ); r3 = Param( "ColorSignal avg", 5, 2, 200, 1 ); m1=MACD(r1,r2); s1=Signal(r1,r2,r3); mycolor=IIf(m1<0 AND m1>s1, ColorRGB(155,155,155),IIf(m1>0 AND m1>s1,ColorRGB(0,125,0),IIf(m1>0 AND m1<s1,ColorRGB(180,30,160),ColorRGB(100,0,0)))); Prd1=Param("ATR Period",4,1,20,1); Prd2=Param("Look Back",7,1,20,1); green = HHV(LLV(L,Prd1)+ATR(Prd1),Prd2); red = LLV(HHV(H,Prd1)-ATR(Prd1),Prd2); flowerClose = EMA((Open+High+Low+Close)/4,3) ; flowerOpen = EMA((Ref(Open,-1) + Ref(flowerClose,-1))/2,3); Temp = Max(High, flowerOpen); flowerHigh = EMA(Max(Temp, flowerClose),3); Temp = Min(Low,flowerOpen); flowerLow = EMA(Min(Temp, flowerClose),3); barColor=IIf(Close>Open,ColorRGB(0,245,0),ColorRGB(255,0,0)); Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume); total = 0; total = total + IIf(tskp_colortmplcnd0 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd1 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd2 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd3 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd4 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd5 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd6 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd7 > 0, 1, -1); total = total + IIf(tskp_colortmplcnd8 > 0, 1, -1); for( i = 0; i < BarCount; i++ ) { if( total[i] >= 5 ) Color[i] = colorLime; else if( total[i] <= -5 ) Color[i] = colorRed; else Color[i] = colorWhite; } Candle=ParamList("Candle","Modified Candlestick,Modified Heikin Ashi,Normal Candlestick",1); if(Candle=="Modified Candlestick") { ColorHighliter = myColor; SetBarFillColor( ColorHighliter ); Plot (Close,"- Modified Candlestick", Color,ParamStyle( "Style", styleCandle|styleLine | styleThick, maskAll)); } if(Candle=="Modified Heikin Ashi") { ColorHighliter = myColor; SetBarFillColor( ColorHighliter ); PlotOHLC( IIf(flowerOpen<flowerClose, flowerOpen, flowerClose),flowerHigh,flowerLow,IIf(flowerOpen<flowerClose, flowerClose, flowerOpen), "Modified Heikin Ashi", Color, styleCandle|styleLine); } if(Candle=="Normal Candlestick") { //ColorHighliter = myColor; //SetBarFillColor( ColorHighliter ); PlotOHLC(O,H,L,C,"Normal Candlestick",barcolor,styleCandle|styleLine); } _SECTION_END(); _SECTION_BEGIN("TSKPPIVOT"); if(Candle=="Modified Heikin Ashi") { CHiPr = 0; CLoPr = 9999999; blsLong = 0; PrevCOBar = 0; NumBars = 0; PrePP = 0; PrevLowVal = 9999999; BuySig = 0; blsShort = 0; PrevHiVal = 0; blsNewCO = 0; BarDif = 0; KPA900Val = E_TSKPA900(Close); KPAutoStopVal = E_TSKPAUTOSTOP(High,Low,Close); // -- Create 0-initialized arrays the size of barcount aHPivs = flowerHigh - flowerHigh; aLPivs = flowerLow - flowerLow; aHiVal = flowerHigh - flowerHigh; aLoVal = flowerLow - flowerLow; Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume); sctotal = 0; sctotal = sctotal + IIf(tskp_colortmplcnd0 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd1 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd2 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd3 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd4 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd5 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd6 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd7 > 0, 1, -1); sctotal = sctotal + IIf(tskp_colortmplcnd8 > 0, 1, -1); for (curBar=0; curBar < BarCount-1; curBar++) { if ( curBar == 0 ) { CHiPr = flowerHigh[curBar]; CHiBar = curBar; CLoPr = flowerLow[curBar]; CLoBar = curBar; blsLong = 0; blsShort = 0; blsNewCO = 0; PrePP = 0; PrevCOBar = 0; PrevHiVal = flowerHigh[curBar]; PrevLowVal = flowerLow[curBar]; BuySig = 0; SellSig = 0; blsLL = 0; } if (flowerHigh[CurBar] >= CHiPr) { CHiPr = flowerHigh[CurBar]; ChiBar = CurBar; } if (flowerLow[CurBar] <= CLoPr) { CLoPr = flowerLow[CurBar]; CLoBar = CurBar; } if ( (KPA900Val[curBar] >= KPAutoStopVal[curbar]) AND (PrePP != -1) AND (blsLong != 1) ){ BarDif = CurBar - PrevCOBar; if (BarDif >= NumBars) { blsLong = 1; blsShort = 0; blsNewCO = 1; PrevCOBar = CurBar; } } if ( (KPA900Val[curBar] <= KPAutoStopVal[curbar]) AND (PrePP != 1) AND (blsShort != 1) ){ BarDif = CurBar - PrevCOBar; if (BarDif >= NumBars) { blsLong = 0; blsShort = 1; blsNewCO = 1; PrevCOBar = CurBar; } } if ( (blsNewCO == 1) AND (sctotal[CurBar] >= 5) AND (blsLong == 1) ) { LVal = CurBar - CLoBar; for (j= CLoBar-1; j <= CLoBar+1; j++) { if (j >=0) { aLPivs[j] = 1; aLoVal[j] = CLoPr; } } PrePP = -1; blsNewCO = 0; CHiPr = flowerHigh[CurBar]; CHiBar = CurBar; CLoPr = flowerLow[Curbar]; CLoBar = CurBar; } else if ((blsNewCO == 1) AND (sctotal[CurBar] <= -5) AND (blsShort == 1) ) { HVal = CurBar - CHiBar; for (j= CHiBar-1; j <= CHiBar+1; j++) { if (j >=0) { aHPivs[j] = 1; aHiVal[j] = CHiPr; } } PrePP = 1; blsNewCO = 0; CHiPr = flowerHigh[CurBar]; CHiBar = CurBar; CLoPr = flowerLow[Curbar]; CLoBar = CurBar; } } PlotShapes(IIf(aHPivs == 1, 21,shapeNone), ColorRGB(255,0,145),0, aHiVal,Offset = 20); PlotShapes(IIf(aHPivs == 1, 15,shapeNone), ColorRGB(200,50,75),0, aHiVal,Offset = 20); PlotShapes(IIf(aLPivs == 1, 21,shapeNone), ColorRGB(0,125,225),0, aLoVal, Offset = -20); PlotShapes(IIf(aLPivs == 1, 15,shapeNone), ColorRGB(0,125,255),0, aLoVal, Offset = -20); } _SECTION_END(); _SECTION_BEGIN("Resistance"); supres=ParamToggle("Sup_Res","No|Yes",1); if(supres) { Prd1=Param("Res_Period1",2,0,200,1); test = TEMA ( High , Prd1 ) ; PK = test > Ref(test,-1) AND Ref(test,1) < High;//Peak PKV0 = ValueWhen(PK,flowerHigh,0);//PeakValue0 PKV1 = ValueWhen(PK,flowerHigh,1);//PeakValue1 PKV2 = ValueWhen(PK,flowerHigh,2);//PeakValue2 MPK = PKV2 < PKV1 AND PKV1 > PKV0 ;//MajorPeak RsColor=ParamColor("ResistColor",ColorRGB(225,0,0)); BrCount=Param("ResistBarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { RsColor[i] = colorBlack; } MPKV = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, PKV1,1); //MajorPeakValue MPKD = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, DateNum(),1); //MajorPeakDate SD = IIf(DateNum() < LastValue(MPKD,lastmode = True ), Null, LastValue(MPKV,Lastmode = True));//SelectedDate Plot(SD, "Resist1", ColorRGB(200,0,0),ParamStyle("ResStyle1",styleDashed|styleNoTitle,maskAll)); RsColor2=ParamColor("Resist2Color",ColorRGB(225,0,0)); BrCount=Param("Resist2BarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { RsColor2[i] = colorBlack; } MPKV2 = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, PKV1,2); //MajorPeakValue MPKD2 = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, DateNum(),2); //MajorPeakDate SD2 = IIf(DateNum() < LastValue(MPKD2,lastmode = True ), Null, LastValue(MPKV2,Lastmode = True));//SelectedDate Plot(SD2, "Resist2", RsColor2,ParamStyle("ResStyle2",styleDashed|styleNoTitle,maskAll)); RsColor3=ParamColor("Resist3Color",ColorRGB(225,0,0)); BrCount=Param("Resist3BarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { RsColor3[i] = colorBlack; } MPKV3 = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, PKV1,3); //MajorPeakValue MPKD3 = ValueWhen(Ref(MPK,-1) == 0 AND MPK == 1, DateNum(),3); //MajorPeakDate SD3 = IIf(DateNum() < LastValue(MPKD3,lastmode = True ), Null, LastValue(MPKV3,Lastmode = True));//SelectedDate Plot(SD3, "Resist3", RsColor3,ParamStyle("ResStyle3",styleThick|styleDots|styleNoTitle,maskAll)); _SECTION_END(); _SECTION_BEGIN("Support"); Prd2=Param("Sup_Period1",2,0,200,1); test2 = TEMA ( Low , Prd2 ) ; SP = Ref(test2,1) > Low AND test2 < Ref(test2,-1);//Peak SPV0 = ValueWhen(SP,flowerLow,0);//PeakValue0 SPV1 = ValueWhen(SP,flowerLow,1);//PeakValue1 SPV2 = ValueWhen(SP,flowerLow,2);//PeakValue2 MSP = SPV2 > SPV1 AND SPV1 < SPV0 ;//MajorPeak SpColor=ParamColor("SupColor",ColorRGB(0,225,0)); BrCount=Param("SupBarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { SpColor[i] = colorBlack; } MSPV = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, SPV1,1); MSPD = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, DateNum(),1); SD = IIf(DateNum() < LastValue(MSPD,lastmode = True ), Null, LastValue(MSPV,Lastmode = True)); Plot(SD,"Support1",SpColor,ParamStyle("SupportLine1",styleDashed|styleNoTitle,maskAll)); SpColor2=ParamColor("SupColor2",ColorRGB(0,200,0)); BrCount=Param("Sup2BarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { SpColor2[i] = colorBlack; } MSPV2 = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, SPV1,2); MSPD2 = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, DateNum(),2); SD2 = IIf(DateNum() < LastValue(MSPD2,lastmode = True ), Null, LastValue(MSPV2,Lastmode = True)); Plot(SD2,"Support2",Spcolor2,ParamStyle("SupportLine2",styleDashed|styleNoTitle,maskAll)); SpColor3=ParamColor("SupColor3",ColorRGB(0,175,0)); BrCount=Param("Sup3BarLength",8,1,500,1); for (i=0;i<BarCount-BrCount;i++) //hide the line except most recent 10 bars { SpColor3[i] = colorBlack; } MSPV3 = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, SPV1,3); MSPD3 = ValueWhen(Ref(MSP,-1) == 0 AND MSP == 1, DateNum(),3); SD3 = IIf(DateNum() < LastValue(MSPD3,lastmode = True ), Null, LastValue(MSPV3,Lastmode = True)); Plot(SD3,"Support3",SpColor3,ParamStyle("SupportLine3",styleThick|styleDots|styleNoTitle,maskAll)); } _SECTION_END(); _SECTION_BEGIN("20EMA High"); Ph = ParamField("Price field",1); Periods1 = Param("Periods", 20, 2, 400, 1 ); bbt=MA( Ph, Periods1 ); //Plot( bbt, "20EMA(H)", ParamColor( "Color", colorAqua ), ParamStyle("Style", styleLine | styleNoLabel ) | styleNoRescale ); _SECTION_END(); _SECTION_BEGIN("20EMA Low"); Pl = ParamField("Price field",2); Periods2 = Param("Periods", 20, 2, 400, 1 ); bbb=MA( Pl, Periods2 ); //Plot( bbb, "20EMA(L)", ParamColor( "Color", colorAqua ), ParamStyle("Style", styleLine | styleNoLabel ) | styleNoRescale ); _SECTION_END(); _SECTION_BEGIN("EMA Channel"); PlotOHLC( bbt, bbt, bbb, bbb, "", ColorBlend( ParamColor("Color", ColorRGB(15,15,15) ), ColorRGB(15,15,15), 0.9 ), styleNoLabel | styleCloud | styleNoRescale, Null, Null, Null, -1 ); _SECTION_END(); _SECTION_BEGIN("Supertrend"); procedure calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice) { global buffer_line_down; global buffer_line_up; buffer_line_down = Null; buffer_line_up = Null; PHASE_NONE = 0; PHASE_BUY = 1; PHASE_SELL = -1; phase=PHASE_NONE; band_upper = 0;band_lower = 0; for(i = ATR_Period + 1; i < BarCount; i++) { band_upper = CalcPrice[i] + ATR_Multiplier * tr[i]; band_lower = CalcPrice[i] - ATR_Multiplier * tr[i]; if(phase==PHASE_NONE) { buffer_line_up[i] = CalcPrice[i]; buffer_line_down[i] = CalcPrice[i]; } if(phase!=PHASE_BUY && Close[i]>buffer_line_down[i-1] && !IsEmpty(buffer_line_down[i-1])) { phase = PHASE_BUY; buffer_line_up[i] = band_lower; buffer_line_up[i-1] = buffer_line_down[i-1]; } if(phase!=PHASE_SELL && Close[i]<buffer_line_up[i-1] && !IsEmpty(buffer_line_up[i-1])) { phase = PHASE_SELL; buffer_line_down[i] = band_upper; buffer_line_down[i-1] = buffer_line_up[i-1]; } if(phase==PHASE_BUY && ((TrendMode==0 && !IsEmpty(buffer_line_up[i-2])) || TrendMode==1) ) { if(band_lower>buffer_line_up[i-1]) { buffer_line_up[i] = band_lower; } else { buffer_line_up[i] = buffer_line_up[i-1]; } } if(phase==PHASE_SELL && ((TrendMode==0 && !IsEmpty(buffer_line_down[i-2])) || TrendMode==1) ) { if(band_upper<buffer_line_down[i-1]) { buffer_line_down[i] = band_upper; } else { buffer_line_down[i] = buffer_line_down[i-1]; } } } } TrendMode = ParamToggle("TrendMode","Off|On",1); ATR_Multiplier = Param("ATR_Multiplier",2,0.1,10,0.1); ATR_Period = Param( "ATR_Period",5,1,20,1); tr = ATR(ATR_Period); CalcPrice = (H+L)/2; calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice); st = ParamToggle("Supertrend","Show|Hide",0); if(st==1) { Plot(buffer_line_up,"\nUP Trend",ColorRGB(28,134,238),styleThick); Plot(buffer_line_down,"\nDOWN Trend",ColorRGB(205,51,51),styleThick); } _SECTION_END(); _SECTION_BEGIN("Beta Adjusted Trailing Stops"); /*Concept from Bulkowski’s Stop Placement Mr. Bulkowski has extensively researched the Trailing Stop problem and found that the best multiplier to be 2 when the lookback period was 22 bars (one month). The average high-low volatility measure (HL) performs better than the average true range (ATR, which includes gaps, whereas the HL method does not) AND better than standard deviation. Standard deviation performed the worst of the three methods in nearly all of the tests. The stop is only raised (or lowered) only if a previous high (or low) is exceeded over the past 22 bar period. The results are excellent when a trending market is in progress and the stop usually gets you out with less that a 8% loss if things go against you. */ dif=Ref(High,0)-Ref(Low,0); dif1=Ref(High,-1)-Ref(Low,-1); dif2=Ref(High,-2)-Ref(Low,-2); dif3=Ref(High,-3)-Ref(Low,-3); dif4=Ref(High,-4)-Ref(Low,-4); dif5=Ref(High,-5)-Ref(Low,-5); dif6=Ref(High,-6)-Ref(Low,-6); dif7=Ref(High,-7)-Ref(Low,-7); dif8=Ref(High,-8)-Ref(Low,-8); dif9=Ref(High,-9)-Ref(Low,-9); dif10=Ref(High,-10)-Ref(Low,-10); dif11=Ref(High,-11)-Ref(Low,-11); dif12=Ref(High,-12)-Ref(Low,-12); dif13=Ref(High,-13)-Ref(Low,-13); dif14=Ref(High,-14)-Ref(Low,-14); dif15=Ref(High,-15)-Ref(Low,-15); dif16=Ref(High,-16)-Ref(Low,-16); dif17=Ref(High,-17)-Ref(Low,-17); dif18=Ref(High,-18)-Ref(Low,-18); dif19=Ref(High,-19)-Ref(Low,-19); dif20=Ref(High,-20)-Ref(Low,-20); dif21=Ref(High,-21)-Ref(Low,-21); Sumdif=(dif+dif1+dif2+dif3+dif4+dif5+dif6+dif7+dif8+dif9+dif10+dif11+dif12+dif13+dif14+dif15+dif16+dif17+dif18+dif19+dif20+dif21)/22; mp = Param("Multiplier",2,0.25,5,0.25); Sumdifml=(Sumdif*mp); Betastops=HHV(C,21) - Sumdifml; // Fibonacci Period used ColorBATS = IIf(Betastops>C,colorTurquoise,colorGold); Plot(Betastops, "BATS", colorBATS,ParamStyle("Style1",styleThick,maskAll)); _SECTION_END(); _SECTION_BEGIN("HAS MTF"); /* Created by chandrakant Modified on 120309..credit goes to of Karthik sir 1. Here are some observations to keep in mind that will help assure you are in a good trending move which is detrimental to the success of the trade moving higher before the inevitable over exhausted trend. 2 Consider only going long on the 5M if the 30M (two rows above) is also blue. 3 Consider the 1hr row as well being blue since it has an effect too. 4 The 15M row has to be blue with NO exceptions 5 The 30M row if blue has less effect on the trade as compared to the 15M row but keep this in mind. The 30M row being blue helps the 15M row continue to stay blue. 6 The 1hr row has even less effect OR importance but it too keeps the 30M from weakening to some minor degree. */ // Define label bar (x) position location blankRightBars = 5; //insert actual blank right bars specified in Preferences barsInView = Status("lastvisiblebarindex") - Status("firstvisiblebarindex") - blankRightBars; Offset = Param("Offset Bar", 0.95, 0, 1, 0.01); textOffset = BarCount - (Offset * barsInView); //// Default TF of the Chart ( Bottom Ribbon ) HaClose =EMA((O+H+L+C)/4,3); HaOpen = AMA( Ref( HaClose, -1 ), 0.5 ); HaHigh = Max( H, Max( HaClose, HaOpen ) ); HaLow = Min( L, Min( HaClose, HaOpen ) ); //PlotText("HAS MTF :"+Interval(2), textoffset, 41.01, colorYellow); Color = IIf( Haopen > Haclose,4, IIf( Haopen == Haclose,colorYellow, 6)); Plot(2,"", Color, styleHistogram+styleThick|styleOwnScale|styleNoLabel, 0, 100 ); Plot( 3,"",colorDarkGrey,styleOwnScale|styleArea|styleNoLabel,0, 100 ); //// 3 X TF Plot ( 2nd Ribbon from Bottom ) Compress2= Param("Compression",3,1,3,1); TimeFrameSet(Compress2* Interval()); HaClose2 =EMA((O+H+L+C)/4,3); HaOpen2 = AMA( Ref( HaClose2, -1 ), 0.5 ); HaHigh2 = Max( H, Max( HaClose2, HaOpen2 ) ); HaLow2 = Min( L, Min( HaClose2, HaOpen2 ) ); //PlotText("HAS MTF :"+Interval(2), textoffset, 41.055, colorYellow); TimeFrameRestore(); HAopen2f=TimeFrameExpand( Haopen2, Compress2* Interval()); Haclose2f=TimeFrameExpand( Haclose2, Compress2* Interval()); HaHigh2f=TimeFrameExpand( Hahigh2, Compress2* Interval()); HaLow2f=TimeFrameExpand( Halow2, Compress2* Interval()); Color2 = IIf( Haopen2f > Haclose2f,4, IIf(Haopen2f == Haclose2f,colorYellow, 6)); Plot(5,"", Color2, styleHistogram+styleThick|styleOwnScale|styleNoLabel, 0, 100 ); Plot( 6,"",colorDarkGrey,styleOwnScale|styleArea|styleNoLabel,0, 100 ); //// 6 X TF Plot ( 3rd Ribbon from Bottom ) Compress3= Param("Compression3",6,2,6,1); TimeFrameSet(Compress3* Interval()); HaClose3 =EMA((O+H+L+C)/4,3); HaOpen3 = AMA( Ref( HaClose3, -1 ), 0.5 ); HaHigh3 = Max( H, Max( HaClose3, HaOpen3 ) ); HaLow3 = Min( L, Min( HaClose3, HaOpen3 ) ); //PlotText("HAS MTF :"+Interval(2), textoffset,41.10, colorYellow); TimeFrameRestore(); HAopen3f=TimeFrameExpand( Haopen3, Compress3* Interval()); Haclose3f=TimeFrameExpand( Haclose3, Compress3* Interval()); HaHigh3f=TimeFrameExpand( Hahigh3, Compress3* Interval()); HaLow3f=TimeFrameExpand( Halow3, Compress3* Interval()); color3 = IIf( Haopen3f > Haclose3f,4, IIf( Haopen3f == Haclose3f,colorYellow,6)); Plot(8,"", Color3, styleHistogram+styleThick|styleOwnScale|styleNoLabel, 0, 100 ); Plot(9,"",colorDarkGrey,styleOwnScale|styleArea|styleNoLabel,0, 100 ); //// 12 X TF Plot ( 4th Ribbon from Bottom ) Compress4= Param("Compression4",12,2,12,1); TimeFrameSet(Compress4* Interval()); HaClose4 =EMA((O+H+L+C)/4,3); HaOpen4 = AMA( Ref( HaClose4, -1 ), 0.5 ); HaHigh4 = Max( H, Max( HaClose4, HaOpen4 ) ); HaLow4 = Min( L, Min( HaClose4, HaOpen4 ) ); //PlotText("HAS MTF :"+Interval(2), textoffset, 41.14, colorYellow); TimeFrameRestore(); HAopen4f=TimeFrameExpand( Haopen4, Compress4* Interval()); Haclose4f=TimeFrameExpand( Haclose4, Compress4* Interval()); HaHigh4f=TimeFrameExpand( Hahigh4, Compress4* Interval()); HaLow4f=TimeFrameExpand( Halow4, Compress4* Interval()); Color4 = IIf( Haopen4f > Haclose4f,4, IIf( Haopen4f == Haclose4f ,colorYellow, 6)); Plot(11,"", Color4, styleHistogram+styleThick|styleOwnScale|styleNoLabel, 0, 100 ); Plot( 12,"",colorDarkGrey,styleOwnScale|styleArea|styleNoLabel,0, 100 ); _SECTION_END();
42 comments
Leave Comment
Please login here to leave a comment.
Back
hai!! shows an error :
i.e- “kpautostopval” used without having been initialized in Ami 5.00. Ln:2018 and Col:52
Hi Niladri,
Thanks a lot for sharing. I am studying it.
My first impression is : just give rating 100.
will update more….
thanks
viswanath
Nice chart. Looks even better with signal panel switched off.
Hi Niladri,
At the bottom of main chart, there are blue & red bars. ( in 4 rows). What are these & what is significamce? Plz explain
Thanks
viswanath
too much error bhaiya …….sahi karke post karo na plz …..
Velmont, I am able to use it without errors. What is your AMI version. Mines is 5.52
And also this may be referring DLL of southwind system which is available at the right side under popular indicators
thanks
viswanath
nira_001,
I am able to use it without errors. AMU Mines version is 5.52
And also this may be referring DLL of southwind system which is available at the right side under popular indicators
thanks
viswanath
lOOKS LIKE THIS SYSTEM WILL GIVE ONE A PARALYSIS BY ANALYSIS
thnk u …vishwanath bhaiya ….mere paas 5.4 version hai …naya load karke check karta hoon …..kuch problem hui to fir se pareshaan karoonga aapko
thnx vishwanath bhaiya …..ab chal gaya
For those who need the explanation of the 4 lines at the bottom of the main chart:
A> Whatever be the Timeframe of you chart is, bottom line is Heiken Ashi(HAS) trend of that TF.
B> The line above the bottom line is 3 x TF HAS Trend
C> The line above B is 6 x TF HAS Trend
D> The top tine is 12 x TF HAS Trend
E.g. if 5min the chart displayed then the bottom lines will mean 5M/15M/30M/60M trend.
Rules: ( Ref http://www.inditraders.com/2309-post50.html )
Here are some observations to keep in mind that will help assure
you are in a good trending move which is detrimental to the success
of the trade moving higher before the inevitable over exhausted trend.
1 Consider only going long on the 5M if the 30M (two rows above) is also blue.
2 Consider the 1hr row as well being blue since it has an effect too.
3 The 15M row has to be blue with NO exceptions
4 The 30M row if blue has less effect on the trade as compared to the 15M row
but keep this in mind. The 30M row being blue helps the 15M row continue to stay blue.
5 The 1hr row has even less effect OR importance but it too keeps the 30M
from weakening to some minor degree.
Its not working in mine……Showing Blank Chart….Pls Help me… any pulgins I need or wt….. Hope of getting help frm any1
i got error line
ln 1891,93,94,95,96,97,98,99,1900, col 41 error 29
i show the charts and mentioned link its look nice and very powerful so please solve this problem.
Hi Niladri,
Thanks for explanation with clear example
viswanath
Hi, Mr.Niti,
Afl has not working with comment as“kpautostopval” used without having been initialized Ln:2018 and Col:52
pls advise with correction,
rkr
what tar1 and tar2 and tar3 signals used for … thanks in advance
T1/T2/T3 as possible FIBO extension / retracement levels.
thanks @ niladri …
i have another question … what does the shadow area in the price chart used for ? do we use it for any purpose ?
the black shadow is 20EMA channel…for channel breakout trading
Ref: http://www.forexstrategiesresources.com/breakout-forex-strategies/5-channel-breakout-and-moving-average/
can you please explain the support buy and sell signals from mikes wave trend ? i.e when does mikes trend ensure my entry or exit ?
thanks in advance mr.niladri
“Mikes Wave Trend” is exact same code as “TrendWave.mq4” in Metatrader.
Video On TrendWave : http://www.youtube.com/watch?v=7vhIsk51_Ro
The four dashed lines in Wavetrend are 60/53 & -60/-53 , a BUY is triggered only when the lines cross within or below the lower band, for sell it has to happen on the upper band.
In Mike’s AFL the programmer just gave one level +64/-64, while the MT4 code had 4 lines as a guide for the trade.
The same guy also have developed a SuperADX.mq4 which was also a great tool.
SuperADX & TerndWave are two killer indicator combination in Metatrader platform.
Hi Niladn,
This looks like an excellent Program but I can’t get it to work because of the following “syntax errors”:
Syntax error, unexpected” (“, is there semicolon missing end if previous line
Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume);
Syntax error, Variable “tskp_colortmplcnd0” used without having been initialized
total = total + IIf(tskp_colortmplcnd0 > 0, 1, -1);
Same error for next 9 lines where “tspk” is used.
I was also wondering if the “Signal Panel” part of program is a “stand alone” program that could replace the one you have posted separately on this site.
Any and all help will be appreciated.
Dick
If you have a newer version send it to me direct at “areehoi@yahoo.com” or direct me to where I can find it. Thanks
Hi Hoierman,
E_TSKPCOLORTMPL function needs Foundation plugin in Amibroker.
Foundation Plugin download link ( NEW )
http://www.mediafire.com/download/6aqaizlzgc5w2mu/Foundation-Int.rar
Hope this solves your issue with the code!
Niladri
Niladri.
Thanks kindly for your response. Try as I may I wasn’t able to get a download from either site. On the site (2) I downloaded but no file was in the download. I there another source that I could use? Or,could you send to my email? I sure would like to test your program as I head up the Yahoo Amibroker VSA Group.
Dick
email: areehoi@yahoo.com
Can u Provide Us Mike wave trend clone with Bollinger band….mike wave available But Not With Bollinger Band…….
Hi Kabir,
Please use this http://www.wisestocktrader.com/indicators/3384-trendwave-on-amibroker as new Trendwave.
Hope this helps!
Regards,
Niladri
the sell= and Buy= which appear in analysis box at right
their values are referenced with futurei.e Buy may be equal to 5 (BUY=5) and after a number of candles its value equal to zeroi.e Buy and sell values on the analysis box are fake values .. to ensure use bar replay and check
IIf( (aHPivs= =1 AND aLPivs==0),PIVOT_SELL = 5, PIVOT_SELL = 0 );
IIf( aLPivs= =1 AND aHPivs==0, PIVOT_BUY = 0, PIVOT_BUY = 5 );
PIVOT_BUY = IIf(aLPivs= =1, 5, 0);
PIVOT_SELL = IIf(aHPivs= =1, 5, 0);
………………….
the second part cancel the first part … however this formula is cut from the Southbreeze Modified v2 for Amibroker (AFL)
Hey Niladri. Is it possible to create an mt4 version of the system?
realy nice work niladri
any updation from your side on this version 2
plz guide if any updations are there.
dr.darshit@gmail.com
Showing error
sir this formula only error please correct formula its very good see please send agin sir
thanking you
hai!! shows an error :
i.e- “kpautostopval” used without having been initialized in Ami 5.60
HOW TO SOLVE THIS PROBLEM?
Please mail me on prakash.modak65{at}gmail{.}com
Prakash Modak
Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume);
Sir, this line gives error. I am using Amibroker V5.6
How to resolve this pls.
Rgds, Sanjay
You need to install the plugin associated with the indicator above.
Dear Admin sir,
I downloaded the zip file as mentioned above.
- It had two plugins as dll. These two i copy and pasted in my plugins folder
- It had The Foundation V13.00 afl . this i copied in my formulas – custom folder – then i copied the T3 Include in the Include folder
- now when i run the afl in my amibroker, it still gives error, which are
Line 126 – KPA900Val = E_TSKPA900(Close);
--Line 127 – KPAutoStopVal = E_TSKPAUTOSTOP(High,Low,Close);--Line 136 – Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume);likewise there are other 8-10 lines in which it gives error.
Kindly help me out with resolving these errors pls. And pls let me know if i am doing anything wrong in this.
Many thanks in advance sir.
Warm Regards, Sanjay
Got it now sir. Thanks.
Now working. I restarted the amibroker for the plugins to take effect
Thanks & Regards, Sanjay
Does it use for Intraday ?. Thank you.
i’m unable to get this afl
downloaded rar
kept plugins in plugin folder,have t3 include and foundation afls
http://tinypic.com/r/202syp/9
i’m unable to get this afl
downloaded rar
kept plugins in plugin folder,have t3 include and foundation afls
Error42
include failed because the file doesnot exist
Formulas\include\t3_include
As the error suggests you do not have the T3 include in the folder ‘Formulas\include’
Who can help me? My app have error Ln1891, Col 50