Stock Portfolio Organizer
The ultimate porfolio management solution.
WiseTrader Toolbox
#1 Selling Amibroker Plugin featuring:
Southwind Modified for Amibroker (AFL)
South wind modified
Formula includes
1. Fibonacci bands
2. Bollinger Bands
3. EMA
4. Buy sell Signals
5. ADX
6. Super Trend
7. Volume Color Band
8. RSI
9. MACD
Checked for commodities and nifty
Crude- 7 Min
Zinc/ Lead – 30 Mins
Nickel – 12 Mins
Nifty – 15 mins
Please change the position if signal disappears. Look for at least one trend per day.
I have not programmed this but combined few strategies and modified it for above given commodities.
Please give your feedback and tips to enhance the performance.
Indicator / Formula
//================= PARTH DESAI=============== //=======================MASTER STRATEGY===================== //######################################################################## // SETUP ALL PARAMETERS //######################################################################## // DisplayAlerts = ParamToggle("Pop up Alerts","Off|On",0); VoiceAlerts = ParamToggle("Voice Alerts","Off|On",0); timeout = 1000; StaticVarSetText( "CurrPos", "" ); function GetSecondNum() { Time = Now( 4 ); Seconds = int( Time % 100 ); Minutes = int( Time / 100 % 100 ); Hours = int( Time / 10000 % 100 ); SecondNum = int( Hours * 60 * 60 + Minutes * 60 + Seconds ); return SecondNum; } function PopupWindowEx( popupID, bodytext, captiontext, timeout, left, top ) { displayText = bodytext + captiontext; if ( ( StaticVarGetText( Name() + "prevPopup" + popupID ) != displayText ) OR ( StaticVarGet( Name() + "prevPopupTime" + popupID ) < GetSecondNum() ) ) { StaticVarSetText( Name() + "prevPopup" + popupID, displayText ); StaticVarSet( Name() + "prevPopupTime" + popupID, GetSecondNum() + timeout ); if (DisplayAlerts ==1) { PopupWindow( bodytext, Captiontext + popupID, timeout, Left, top ); PlaySound( "c:\\windows\\media\\ding.wav" ); } if (VoiceAlerts ==1) Say (bodytext); } } //=============================SETUP TREND====================================== //SetBarsRequired(100000,0); pds = 20; MAFAST = EMA( Close, 20 ); MASLOW = EMA( Close, 40 ); DonchianUpper = HHV( Ref( H, -1 ), pds ); // Highest high value of highs in last 20 periods DonchianLower = LLV( Ref( L, -1 ), pds ); // Lowest low value of low in last 20 periods DonchianMiddle = ( DonchianUpper + DonchianLower ) / 2; UpTrend = C > ( LLV( L, 20 ) + 2 * ATR( 10 ) ) AND EMA( Close, 20 ) > EMA( Close, 40 ); DnTrend = C < ( HHV( H, 20 ) - 2 * ATR( 10 ) ) AND EMA( Close, 20 ) < EMA( Close, 40 ); Color = IIf( UpTrend, colorGreen, IIf( DnTrend, colorRed, colorCustom10 ) ); // Plots a 20 period Donchian channel //Plot( C, "Price", Color, styleBar | styleThick ); //=============================DISPLAY PARAMS====================================== _SECTION_BEGIN("Price"); Buy=Sell=Short=Cover=0; SetChartOptions(0,chartShowArrows|chartShowDates); _N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, High %g, Low %g, Close %g (%.1f%%) {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 ) ) )); Plot( C, "Close", ParamColor("Color", colorBlack ), styleNoTitle | ParamStyle("Style") | GetPriceStyle() ); _SECTION_END(); _SECTION_BEGIN("Magnified Market Price"); procedure DrawData (Text, x1, y1, x2, y2, BoxColor, FontSize) { GfxSetOverlayMode(0); GfxSelectFont("Segoe UI", FontSize, 600); //FS=Param("Font Size",FontSize,FontSize,100,1); //GfxSelectFont("Segoe UI", FS, 900, italic = False, underline = False, True ); GfxSetBkMode(1); //GfxGradientRect(x1, y1, x2, y2, colorFrom, colorTo); GfxSelectSolidBrush( BoxColor); GfxRoundRect( x1, y1, x2, y2, 7, 7 ); GfxDrawText(Text, x1, y1, x2, y2, 32|0|4|16); } GfxSetTextColor(colorWhite); if(StaticVarGetText("firstflag")=="") { StaticVarSetText ("firstflag","0"); } if(StaticVarGetText("firstflag"+Name())=="") { StaticVarSet(("BuyIndex" + Name()), 0); StaticVarSet(("BuyCount" + Name()), 0); StaticVarSet(("BuyFlag" + Name()), 0); StaticVarSet(("BuyPrice" + Name()), 0); StaticVarSet(("BuyQty" + Name()), 0); StaticVarSet(("SellIndex" + Name()), 0); StaticVarSet(("SellCount" + Name()), 0); StaticVarSet(("SellFlag" + Name()), 0); StaticVarSet(("SellPrice" + Name()), 0); StaticVarSet(("SellQty" + Name()), 0); StaticVarSet("LTPSave" + Name(), 0); StaticVarSet("LTQSave" + Name(), 0); StaticVarSet("VolumeTemp" + Name(), 0); StaticVarSet("AskSave" + Name(), 0); StaticVarSet("BidSave" + Name(), 0); StaticVarSet("LastLTPColor" + Name(), colorGrey40); StaticVarSet("LastLTQColor" + Name(), colorGrey40); StaticVarSet("LastAskColor" + Name(), colorGrey40); StaticVarSet("LastBidColor" + Name(), colorGrey40); StaticVarSetText("firstflag"+Name(), "0"); } CurrentAskPrice = LastValue(Aux1); CurrentBidPrice = LastValue(Aux2); CurrentTradedPrice = LastValue(C); CurrentVolume = LastValue(Volume); LTPTemp = StaticVarGet("LTPSave" + Name()); LTQTemp = StaticVarGet("LTQSave" + Name()); VolumeTemp = StaticVarGet("VolumeTemp" + Name()); AskTemp = StaticVarGet("AskSave" + Name()); BidTemp = StaticVarGet("BidSave" + Name()); CurrentLTQ = (CurrentVolume - VolumeTemp); if(CurrentLTQ < 0) { CurrentLTQ = CurrentLTQ * -1; } if(CurrentLTQ == 0) { CurrentLTQ = LTQTemp; } LTPColor = StaticVarGet("LastLTPColor" + Name()); LTQColor = StaticVarGet("LastLTQColor" + Name()); AskColor = StaticVarGet("LastAskColor" + Name()); BidColor = StaticVarGet("LastBidColor" + Name()); if(LTPTemp > CurrentTradedPrice) { LTPColor = colorRed; } else if(LTPTemp < CurrentTradedPrice) { LTPColor = colorGreen; } if(LTQTemp > CurrentLTQ) { LTQColor = colorRed; } else if(LTQTemp < CurrentLTQ) { LTQColor = colorGreen; } StaticVarSet("LastLTPColor" + Name(), LTPColor); StaticVarSet("LastLTQColor" + Name(), LTQColor); StaticVarSet("LastAskColor" + Name(), AskColor); StaticVarSet("LastBidColor" + Name(), BidColor); StaticVarSet("LTPSave" + Name(), CurrentTradedPrice); StaticVarSet("LTQSave" + Name(), CurrentLTQ); StaticVarSet("VolumeTemp" + Name(), CurrentVolume); StaticVarSet("AskSave" + Name(), CurrentAskPrice); StaticVarSet("BidSave" + Name(), CurrentBidPrice); X0 = 10; Y0 = 100; YC=TimeFrameGetPrice("C",inDaily,-1); DD=Prec(C-YC,2); xx=Prec((DD/YC)*100,2); //DrawData ("" + CurrentTradedPrice +" ("+xx+"%)", X0, Y0, X0+320, Y0+50, LTPColor, 30); DrawData ("" + C, X0, Y0, X0+150, Y0+50, LTPColor, 30); DrawData (" ("+xx+"%) ", X0+155, Y0, X0+300, Y0+50, LTPColor, 24); DrawData (" LTQ : " + NumToStr(CurrentLTQ,1,0), X0, Y0+55, X0+100, Y0+85, LTQColor, 12); /* FS=Param("Font Size",30,30,100,1); GfxSelectFont("Arial", FS, 900, italic = False, underline = False, True ); GfxSetBkMode( colorWhite ); GfxSetTextColor( ParamColor("Color",colorYellow) ); //Hor=Param("Horizontal Position",800,800,800,800); Hor=Param("Horizontal Position",100,100,100,100); Ver=Param("Vertical Position",25,25,250,50); GfxTextOut(""+C,Hor , Ver ); YC=TimeFrameGetPrice("C",inDaily,-1); DD=Prec(C-YC,2); xx=Prec((DD/YC)*100,2); GfxSelectFont("Arial", 12, 700, italic = False, underline = False, True ); GfxSetBkMode( colorWhite ); GfxSetTextColor(ParamColor("Color",colorYellow) ); GfxTextOut(""+DD+" ("+xx+"%)", Hor+5, Ver+45 ); */ _SECTION_END(); /*_SECTION_BEGIN("Name"); GfxSetOverlayMode(0); GfxSelectFont("Tahoma", Status("pxheight")/8 ); GfxSetTextAlign( 0 );// center alignment GfxSetTextColor( ColorHSB( 42, 42, 42 ) ); GfxSetBkMode(1); // transparent Hor=Param("Horizontal Position",100,100,100,100); Ver=Param("Vertical Position",360,360,250,50); GfxTextOut(""+Name(), Hor+5, Ver+45 ); _SECTION_END(); */ _SECTION_BEGIN( "GFX EMA" ); procedure Plotlinewidth( pvalue, ptitle, pcolor, pstyle, pmin, pmax, pxshift, plinewidth, pshowdate ) { local pvalue, ptitle, pcolor, pstyle, pmin, pmax, pxshift, plinewidth, ppenstyle, pshowdate; local Miny, Maxy; local Lvb, fvb; local pxwidth, pxheight; local TotalBars, axisarea; local i, x, y; if ( plinewidth > 0 && Status( "action" ) == 1 && ( pstyle & styleLine == styleLine ) ) { ////GfxSetOverlayMode( 0 ); Miny = Status( "axisminy" ); Maxy = Status( "axismaxy" ); lvb = Status( "lastvisiblebar" ); fvb = Status( "firstvisiblebar" ); pxwidth = Status( "pxwidth" ); pxheight = Status( "pxheight" ); TotalBars = Lvb - fvb; xaxisarea = 56; if ( pshowdate ) yaxisarea = 10; else yaxisarea = 0; i = 0; x = 5 + i * ( pxwidth - xaxisarea - 10 ) / ( TotalBars + 1 ); y = 5 + yaxisarea + ( pvalue[i+fvb] - Miny ) * ( pxheight - yaxisarea - 10 ) / ( Maxy - Miny ); GfxMoveTo( x, pxheight - y ); for ( i = 1; i < TotalBars AND i < ( BarCount - fvb ); i++ ) { GfxSelectPen( pcolor[i + fvb], plinewidth, 0 ); x = 5 + i * ( pxwidth - xaxisarea - 10 ) / ( TotalBars + 1 ); y = 5 + yaxisarea + ( pvalue[i+fvb] - Miny ) * ( pxheight - yaxisarea - 10 ) / ( Maxy - Miny ); GfxLineTo( x, pxheight - y ); } } } RequestTimedRefresh( 2 ); _SECTION_END(); _SECTION_BEGIN( "Small Triggers" ); p1 = Param( "TL 1 Periods", 20, 5, 50, 1 ); p2 = Param( "TL 2 Periods", 5, 3, 25, 1 ); TL1 = LinearReg( C, p1 ); TL2 = EMA( TL1, p2 ); Col1 = IIf( TL1 > TL2, ParamColor( "TL Up Colour", colorBrightGreen ), ParamColor( "TL Dn Colour", colorCustom12 ) ); ShortTrend = WriteIf( TL1 > TL2, "Uptrend", "Downtrend" ); Plot( TL1, "LinearReg(20)", Col1, styleLine | styleNoLabel ); Plot( TL2, "EMA(5)", Col1, styleLine | styleNoLabel ); // | styleThick _SECTION_END(); _SECTION_BEGIN( "Large Triggers" ); p3 = Param( "TL 3 Periods", 80, 5, 100, 1 ); p4 = Param( "TL 4 Periods", 20, 3, 100, 1 ); TL3 = LinearReg( C, p3 ); TL4 = EMA( TL3, p4 ); Col1 = IIf( TL3 > TL4, ParamColor( "TLL Up Colour", colorBlue ), ParamColor( "TLL Dn Colour", colorRed ) ); LongTrend = WriteIf( TL3 > TL4, "Uptrend", "Downtrend" ); Plot( TL3, "LinearReg(80)", Col1, styleLine | styleNoLabel ); Plot( TL4, "EMA(20)", Col1, styleLine | styleNoLabel ); _SECTION_END(); _SECTION_BEGIN( "Fibo Retrace and Extensions" ); fibs = ParamToggle( "Plot Fibs", "Off|On", 1 ); pctH = Param ( "Pivot Hi %", 0.325, 0.001, 2.0, 0.002 ); HiLB = Param ( "Hi LookBack", 1, 1, BarCount - 1, 1 ); pctL = Param ( "Pivot Lo %", 0.325, 0.001, 2.0, 0.002 ); LoLB = Param ( "Lo LookBack", 1, 1, BarCount - 1, 1 ); Back = Param ( "Extend Left = 2", 1, 1, 500, 1 ); Fwd = Param( "Plot Forward", 0, 0, 500, 1 ); text = ParamToggle( "Plot Text", "Off|On", 1 ); hts = Param ( "Text Shift", -33.5, -50, 50, 0.10 ); style = ParamStyle( "Line Style", styleLine, styleNoLabel ); x = BarIndex(); pRp = PeakBars( H, pctH, 1 ) == 0; yRp0 = SelectedValue( ValueWhen( pRp, H, HiLB ) ); xRp0 = SelectedValue( ValueWhen( pRp, x, HiLB ) ); pSp = TroughBars( L, pctL, 1 ) == 0; ySp0 = SelectedValue( ValueWhen( pSp, L, LoLB ) ); xSp0 = SelectedValue( ValueWhen( pSp, x, LoLB ) ); Delta = yRp0 - ySp0; function fib( ret ) { retval = ( Delta * ret ); Fibval = IIf( ret < 1.0 AND xSp0 < xRp0, yRp0 - retval, IIf( ret < 1.0 AND xSp0 > xRp0, ySp0 + retval, IIf( ret > 1.0 AND xSp0 < xRp0, yRp0 - retval, IIf( ret > 1.0 AND xSp0 > xRp0, ySp0 + retval, Null ) ) ) ); return FibVal; } x0 = Min( xSp0, xRp0 ) - Back; x1 = ( BarCount - 1 ); r236 = fib( 0.236 ); r236I = LastValue ( r236, 1 ); r382 = fib( 0.382 ); r382I = LastValue ( r382, 1 ); r050 = fib( 0.50 ); r050I = LastValue ( r050, 1 ); r618 = fib( 0.618 ); r618I = LastValue ( r618, 1 ); r786 = fib( 0.786 ); r786I = LastValue ( r786, 1 ); e127 = fib( 1.27 ); e127I = LastValue ( e127, 1 ); e162 = fib( 1.62 ); e162I = LastValue ( e162, 1 ); e200 = fib( 2.00 ); e200I = LastValue ( e200, 1 ); e262 = fib( 2.62 ); e262I = LastValue ( e262, 1 ); e424 = fib( 4.24 ); e424I = LastValue ( e424, 1 ); p00 = IIf( xSp0 > xRp0, ySp0, yRp0 ); p00I = LastValue ( p00, 1 ); p100 = IIf( xSp0 < xRp0, ySp0, yRp0 ); p100I = LastValue ( p100, 1 ); color00 = IIf( xSp0 > xRp0, colorLime, colorRed ); color100 = IIf( xSp0 < xRp0, colorLime, colorRed ); numbars = LastValue( Cum( Status( "barvisible" ) ) ); fraction = IIf( StrRight( Name(), 3 ) == "", 3.2, 3.2 ); if ( fibs == 1 ) { Plot( LineArray( xRp0 - Fwd, yRp0, x1, yRp0, Back ), "PR", 32, 8 | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( xSp0 - Fwd, ySp0, x1, ySp0, Back ), "PS", 27, 8 | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, r236, x1, r236, Back ), "", 45, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, r382, x1, r382, Back ), "", 44, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, r050, x1, r050, Back ), "", 41, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, r618, x1, r618, Back ), "", 43, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, r786, x1, r786, Back ), "", 42, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, e127, x1, e127, Back ), "e127", 47, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, e162, x1, e162, Back ), "e162", 47, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, e200, x1, e200, Back ), "p200", 47, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, e262, x1, e262, Back ), "p262", 47, style | styleNoRescale, Null, Null, Fwd ); Plot( LineArray( x0 - Fwd, e424, x1, e424, Back ), "p424", 25, style | styleNoRescale, Null, Null, Fwd ); } if ( text == 1 ) { PlotText( " 0% = " + WriteVal( p00, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), p00I + 0.05, color00 ); PlotText( "23% = " + WriteVal( r236, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r236I + 0.05, 45 ); PlotText( "38% = " + WriteVal( r382, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r382I + 0.05, 44 ); PlotText( "50% = " + WriteVal( r050, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r050I + 0.05, 41 ); PlotText( "62% = " + WriteVal( r618, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r618I + 0.05, 43 ); PlotText( "78% = " + WriteVal( r786, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r786I + 0.05, 42 ); PlotText( "100% = " + WriteVal( p100, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), p100I + 0.05, color100 ); PlotText( "127% = " + WriteVal( e127, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e127I + 0.05, 47 ); PlotText( "162% = " + WriteVal( e162, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e162I + 0.05, 47 ); PlotText( "200% = " + WriteVal( e200, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e200I + 0.05, 47 ); PlotText( "262% = " + WriteVal( e262, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e262I + 0.05, 47 ); PlotText( "424% = " + WriteVal( e424, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e424I + 0.05, 25 ); } _SECTION_END(); _SECTION_BEGIN( "Pivot Finder for Amibroker" ); /* ********************************** Code to automatically identify pivots ********************************** */ // -- what will be our lookback range for the hh and ll? farback = Param( "How Far back to go", 100,50, 5000, 10 ); nBars = Param( "Number of bars", 12, 5, 40 ); // -- Title. /*Title = Name() + " (" + StrLeft( FullName(), 15 ) + ") O: " + Open + ", H: " + High + ", L: " + Low + ", C: " + Close; */ // -- Plot basic candle chart /*PlotOHLC( Open, High, Low, Close, "BIdx = " + BarIndex() + "\n" + "O = " + O + "\n" + "H = " + H + "\n" + "L = " + L + "\n" + "C ", colorBlack, styleBar ); */ GraphXSpace = 7; // -- Create 0-initialized arrays the size of barcount aHPivs = H - H; aLPivs = L - L; // -- More for future use, not necessary for basic plotting aHPivHighs = H - H; aLPivLows = L - L; aHPivIdxs = H - H; aLPivIdxs = L - L; nHPivs = 0; nLPivs = 0; lastHPIdx = 0; lastLPIdx = 0; lastHPH = 0; lastLPL = 0; curPivBarIdx = 0; // -- looking back from the current bar, how many bars // back were the hhv and llv values of the previous // n bars, etc.? aHHVBars = HHVBars( H, nBars ); aLLVBars = LLVBars( L, nBars ); aHHV = HHV( H, nBars ); aLLV = LLV( L, nBars ); // -- Would like to set this up so pivots are calculated back from // last visible bar to make it easy to "go back" and see the pivots // this code would find. However, the first instance of // _Trace output will show a value of 0 aVisBars = Status( "barvisible" ); nLastVisBar = LastValue( Highest( IIf( aVisBars, BarIndex(), 0 ) ) ); _TRACE( "Last visible bar: " + nLastVisBar ); // -- Initialize value of curTrend curBar = ( BarCount - 1 ); curTrend = ""; if ( aLLVBars[curBar] < aHHVBars[curBar] ) { curTrend = "D"; } else { curTrend = "U"; } // -- Loop through bars. Search for // entirely array-based approach // in future version for ( i = 0; i < farback; i++ ){ curBar = ( BarCount - 1 ) - i; // -- Have we identified a pivot? If trend is down... if ( aLLVBars[curBar] < aHHVBars[curBar] ) { // ... and had been up, this is a trend change if ( curTrend == "U" ) { curTrend = "D"; // -- Capture pivot information curPivBarIdx = curBar - aLLVBars[curBar]; aLPivs[curPivBarIdx] = 1; aLPivLows[nLPivs] = L[curPivBarIdx]; aLPivIdxs[nLPivs] = curPivBarIdx; nLPivs++; } // -- or current trend is up } else { if ( curTrend == "D" ) { curTrend = "U"; curPivBarIdx = curBar - aHHVBars[curBar]; aHPivs[curPivBarIdx] = 1; aHPivHighs[nHPivs] = H[curPivBarIdx]; aHPivIdxs[nHPivs] = curPivBarIdx; nHPivs++; } // -- If curTrend is up...else... } // -- loop through bars } // -- Basic attempt to add a pivot this logic may have missed // -- OK, now I want to look at last two pivots. If the most // recent low pivot is after the last high, I could // still have a high pivot that I didn't catch // -- Start at last bar curBar = ( BarCount - 1 ); candIdx = 0; candPrc = 0; lastLPIdx = aLPivIdxs[0]; lastLPL = aLPivLows[0]; lastHPIdx = aHPivIdxs[0]; lastHPH = aHPivHighs[0]; if ( lastLPIdx > lastHPIdx ) { // -- Bar and price info for candidate pivot candIdx = curBar - aHHVBars[curBar]; candPrc = aHHV[curBar]; if ( lastHPH < candPrc AND candIdx > lastLPIdx AND candIdx < curBar ) { // -- OK, we'll add this as a pivot... aHPivs[candIdx] = 1; // ...and then rearrange elements in the // pivot information arrays for ( j = 0; j < nHPivs; j++ ) { aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs- ( j+1 )]; aHPivIdxs[nHPivs-j] = aHPivIdxs[nHPivs-( j+1 )]; } aHPivHighs[0] = candPrc ; aHPivIdxs[0] = candIdx; nHPivs++; } } else { // -- Bar and price info for candidate pivot candIdx = curBar - aLLVBars[curBar]; candPrc = aLLV[curBar]; if ( lastLPL > candPrc AND candIdx > lastHPIdx AND candIdx < curBar ) { // -- OK, we'll add this as a pivot... aLPivs[candIdx] = 1; // ...and then rearrange elements in the // pivot information arrays for ( j = 0; j < nLPivs; j++ ) { aLPivLows[nLPivs-j] = aLPivLows[nLPivs-( j+1 )]; aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-( j+1 )]; } aLPivLows[0] = candPrc; aLPivIdxs[0] = candIdx; nLPivs++; } } // -- Dump inventory of high pivots for debugging /* for (k=0; k<nHPivs; k++) { _TRACE("High pivot no. " + k + " at barindex: " + aHPivIdxs[k] + ", " + WriteVal(ValueWhen(BarIndex()==aHPivIdxs[k], DateTime(), 1), formatDateTime) + ", " + aHPivHighs[k]); } */ // -- OK, let's plot the pivots using arrows //============== EXPLORATION ============== Buy = aLPivs==1; Sell = aHPivs==1; //Buy = ExRem(Buy,Sell); //Sell = ExRem(Sell,Buy); BuyPrice = ValueWhen( Buy, O ); SellPrice = ValueWhen( Sell, O ); /*SellPrice=ValueWhen(Sell,C,1); BuyPrice=ValueWhen(Buy,C,1); Long=Flip(Buy,Sell); Shrt=Flip(Sell,Buy ); */ autotrader= ParamToggle( "Automate Trade", "No|Yes", 0 ); if (autotrader == 1) SATC1.(Open, High, Low, Close, Volume, Aux1, Aux2, Buy, Sell, Sell, Buy); for(i=BarCount-1;i>1;i--) { if(Buy[i] == 1) { entry = C[i]; sig = "BUY"; bars = i; i = 0; } if(Sell[i] == 1) { sig = "SELL"; entry = C[i]; bars = i; i = 0; } } if ( sig =="BUY" ) { PopupWindowEx( "ID:0", "Get Ready to BUY \n" + Name() + " @ " + BuyPrice, "Buy Alert -", timeout, 100, 1 ); } else { PopupWindowEx( "ID:1", "Get Ready to SELL \n" + Name() + " @ " + SellPrice, "Sell Alert -", timeout, 100, 1 ); } PlotShapes(shapeUpArrow*Buy,colorBrightGreen); PlotShapes(shapeDownArrow*Sell,colorRed); //PlotShapes( IIf( Sell, shapeDownArrow, shapeNone ), colorRed, 0, High, Offset = -15 ); //PlotShapes( IIf( Buy, shapeUpArrow , shapeNone ), colorBrightGreen, 0, Low, Offset = -15 ); //AlertIf( Sell, "SOUND C:\\Windows\\Media\\Ding.wav", "Sell " + C, 2, 1 + 2, 1 ); //AlertIf( Buy, "SOUND C:\\Windows\\Media\\Ding.wav", "Buy " + C, 1, 1 + 2, 1 ); dist = 1.1 * ATR( 15 ); for ( i=BarCount-1; i > 0; i-- ) { if ( Buy[i] ) PlotText( "Buy@" + O[ i ], i, L[ i ] - dist[i], colorWhite, colorGreen); if ( Sell[i] ) PlotText( "Sell@" + O[ i ], i, H[ i ] + dist[i], colorWhite, colorRed); } //============== MESSAGE BOARD ============== messageboard = ParamToggle( "Message Board", "Show|Hide", 0 ); //CUSTOM CODE FOR MESSAGE BOARD Hp = HHV( H, 40 ); Lp = LLV( L, 40 ); BarsSincebuy = BarsSince( Buy ); BarsSinceshort = BarsSince( Sell ); LastSignal = IIf( BarsSincebuy < BarsSinceshort, 1, -1 ); Sig = WriteIf( BarsSincebuy < BarsSinceshort, "BUY", "SELL" ); slPrice = IIf( LastSignal == 1, HighestSince( Buy, Lp ), LowestSince( Sell , Hp ) ); initialrisk = IIf( LastSignal == 1, BuyPrice - SLPrice, SLPrice - SellPrice ); CurrentPL = IIf( LastSignal == 1, C - BuyPrice, SellPrice - C ); entry = IIf( LastSignal == 1, BuyPrice, SellPrice ); bars = LastValue( IIf( BarsSincebuy < BarsSinceshort, BarsSincebuy, BarsSinceshort ) ); Offset = 15; Clr = IIf( LastValue( LastSignal ) == 1, colorGreen, colorRed ); if (messageboard == 0 ) { GfxSelectFont( "Tahoma", 11, 700 ); GfxSetBkMode( 1 ); GfxSetTextColor( colorWhite ); GfxSetOverlayMode(0); LongCaution = ShortCaution = ""; if ( SelectedValue( LastSignal ) == 1 ) { GfxSelectSolidBrush( colorDarkGreen ); Datetim = "" + ValueWhen( Buy, Hour(), 1 ) + ":" + ValueWhen( Buy, Minute(), 1 ); tar1 = entry + ( entry * .0050 ); tar2 = entry + ( entry * .0092 ); tar3 = entry + ( entry * .0179 ); LongCaution = WriteIf(LongTrend == "Downtrend", " (Caution)", ""); ShortCaution = WriteIf(ShortTrend == "Downtrend", " (Caution)", ""); } else { GfxSelectSolidBrush( colorDarkRed ); Datetim = "" + ValueWhen( Sell, Hour(), 1 ) + ":" + ValueWhen( Sell, Minute(), 1 ); tar1 = entry - ( entry * .0050 ); tar2 = entry - ( entry * .0112 ); tar3 = entry - ( entry * .0212 ); LongCaution = WriteIf(LongTrend == "Uptrend", " (Caution)", ""); ShortCaution = WriteIf(ShortTrend == "Uptrend", " (Caution)", ""); } pxHeight = Status( "pxchartheight" ); xx = Status( "pxchartwidth" ); Left = 1100; width = 310; x = 1.5; x2 = 300; boxheight = 210; y = pxHeight / 1; GfxSelectPen( colorLightBlue, 1 ); GfxRoundRect( x, y - 210, x2, y , 7, 7 ) ; GfxTextOut( ( " Trading System "),50, y-boxheight+10); GfxTextOut( ( " ..........................................." ), 5, y-boxheight+20 ); GfxTextOut( ( "Last Signal" ), 13,y-boxheight+40 ); GfxTextOut( ( ": " + Datetim ), 130, y-boxheight+40 ); GfxTextOut( ( "" + sig + " Entry @" ), 13, y-boxheight+60 ); GfxTextOut( ( ": " + entry ), 130, y-boxheight+60 ); GfxTextOut( ( "Current P/L" ), 13, y-boxheight+80 ); GfxTextOut( ( ": " + WriteVal( IIf( sig == "BUY", ( C - entry ), ( entry - C ) ), 2.2 ) ), 130, y-boxheight+80 ); GfxTextOut( ( "Long Trend" ), 13, y-boxheight+100 ); GfxTextOut( ( ": " + LongTrend + LongCaution ), 130, y-boxheight+100 ); GfxTextOut( ( "Short Trend" ), 13, y-boxheight+120 ); GfxTextOut( ( ": " + ShortTrend + ShortCaution ), 130, y-boxheight+120 ); GfxTextOut( ( " ..........................................." ), 5, y-boxheight+130 ); GfxTextOut( ("Target1"), 13, y-boxheight+150); GfxTextOut( ( ": " + tar1 ), 130, y-boxheight+150 ); GfxTextOut( ("Target2"), 13, y-boxheight+170); GfxTextOut( ( ": " + tar2), 130, y-boxheight+170 ); GfxTextOut( ("Target3"), 13, y-boxheight+190); GfxTextOut( ( ": " + tar3), 130, y-boxheight+190 ); } _SECTION_END(); //SetChartBkGradientFill( ParamColor( "BgTop", ColorRGB( 0, 0, 0 ) ), ParamColor( "BgBottom", ColorRGB( 0, 0, 0 ) ), ParamColor( "titleblock", ColorRGB( 0, 0, 0 ) ) ); _SECTION_BEGIN("Volume At Price"); PlotVAPOverlay(Param("Lines", 1000, 100, 1000, 10), Param("Width", 15, 1, 100, 1), ParamColor("Color", colorBlue), ParamToggle("Side", "Left|Right", 1) | 4 *ParamToggle("Z-order", "On top|Behind", 1)); _SECTION_END(); //Volume Price Analysis AFL - VPA Version 3.0 -15-06-2015 // Revision Details // V-2.0 AFL - fully re written for clarity, Minor bugs removed // V-2.1 support and resistance line added // V-2.2 Commentary for support and resistance line breaks Added. // V-2.3 Revision detail- High volume Lines added // V-2.4 Toggle switch for plotting S/R, High volume and Trend lines added // V-2.5 Bar coloring option included - VSA based or Trend Based // V-3.0 Trend detection Method changed to "Random Walk" //===================Version V.3.0 ====================== //=========================================================================| // VPA Basic Module | //=========================================================================| _SECTION_BEGIN("VPA Basic Module"); SetChartOptions(0,chartShowArrows|chartShowDates); gxs=Param("GRAPH spaceing",10,5,50,5); GraphXSpace = gxs; SetChartBkColor(ParamColor("Outer panel",colorBlack)); // color of outer border SetChartBkGradientFill( ParamColor("Inner panel upper",colorBlack),ParamColor("Inner panel lower",colorBlack)); //===================== Basic Definitions ======================================= volAvg = MA(V,90); volMean = StDev(volAvg,30); volUpBand3 = volAvg + 3*volMean; volUpband2 = volAvg + 2*volMean;; volUpBand1 = volAvg + 1*volMean;; volDnBand1 = volAvg -1*volMean; volDnBand2 = volAvg -2*volMean; midprice = (H+L)/2; spread = (H-L); avgSpread = MA(spread,90); wideRangeBar = spread>(1.5*avgSpread); narrowRangeBar = spread<(0.7*avgSpread); lowVolume = V<Ref(V,-1) AND V<Ref(V,-2); upBar = C>Ref(C,-1); downBar = C<Ref(C,-1); highVolume = V>Ref(V,-1) AND Ref(V,-1)>Ref(V,-2); closeFactor = C-L; clsPosition = spread/closeFactor; closePosition = IIf(closeFactor=0,avgSpread,clsPosition); Vb = V>volAvg OR V>Ref(V,-1); upClose = C>=((spread*0.7)+L);// close is above 70% of the Bar downClose = C<=((spread*0.3)+L);// close is below the 30% of the bar aboveClose = C>((spread*0.5)+L);// close is between 50% and 70% of the bar belowClose = C<((spread*0.5)+L);// close is between 50% and 30% of the bar midClose = C>((spread*0.3)+L) AND C<((spread*0.7)+L);// close is between 30% and 70% of the bar veryLowClose = closePosition>4;//close is below 25% of the bar veryHighClose = closePosition<1.35;// Close is above 80% of the bar ClosePos = IIf(C<=((spread*0.3)+L),1,IIf(C<=((spread*0.5)+L),2,IIf(C<=((spread*0.7)+L),3,4))); // 1 = downclose, 2 = belowclose, 3 = aboveClose, 4 = Upclose Volpos = IIf(V>volAvg*2,1,IIf(V>volAvg*1.3,2,IIf(V>volAvg,3,IIf(V<volAvg AND V>volAvg*0.7,4,5)))); // 1 = Very High, 2 = High, 3 = Above Average, 4 = Less than Average, 5 = Low freshGndHi = C > HHV(H,5); freshGndLo = C < LLV(L,5); //========================Trend Estimation ========================= j=MA(C,5); trendLongTerm = LinRegSlope(j,40) ; trendMediumTerm = LinRegSlope(j,10) ; trendShortTerm = LinRegSlope(j,3); tls=LinRegSlope(j,3); _SECTION_END(); //=========================================================================| // Trend Analysis Module | //=========================================================================| _SECTION_BEGIN("Trend Analysis"); SetChartOptions(0,chartShowArrows|chartShowDates); minperiodsRWIst = Param ( "Short term Min Periods", 2, 1, 9, 1); maxperiodsRWIst = Param ( "Short term Max Periods", 8, 1, 9, 1); minperiodsRWIlt = Param ( "Long Term Min Periods", 10, 1, 32, 1); maxperiodsRWIlt = Param ( "Long term Max Periods", 40, 1, 64, 1); Ground = RWIHi (minperiodsRWIst, maxperiodsRWIst); Sky = RWILo (minperiodsRWIst, maxperiodsRWIst); j = RWI(minperiodsRWIlt, maxperiodsRWIlt); k = RWI(minperiodsRWIst, maxperiodsRWIst); j2 = RWIHi (minperiodsRWIlt, maxperiodsRWIlt); k2 = RWILo (minperiodsRWIlt, maxperiodsRWIlt); ja = Cross(j,1); // The followign section check the diffeent condition of the RWi above and below zero jb = Cross(1,j); // In oder to check which trend is doing what jc = Cross(-1,j); jd = Cross(j,-1); j2a = Cross(j2,1); j2b = Cross(1,j2); k2a = Cross(k2,1); k2b = Cross(1,k2); //Define the Major, Minor and Immediate trend Sttatus upmajoron = j > 1 AND Ref(ja,-1); upmajoroff = j < 1 AND Ref(jb,-1); upminoron = j2 > 1 AND Ref(j2a,-1); upminoroff = j2 < 1 AND Ref(j2b,-1); dnmajoron = j < -1 AND Ref(jc,-1); dnmajoroff = j > -1 AND Ref(jd,-1); dnminoron = k2 > 1 AND Ref(k2a,-1); dnminoroff = k2 < 1 AND Ref(k2b,-1); upimd = IIf(ground > 1, 1,0); dnimd = IIf(sky > 1, 1, 0); upmajor = IIf(j>1,1,IIf(j<(-1),-1,0)); upminor = IIf(j2>1,1,-1); dnminor = IIf(k2>1,1,-1); _SECTION_END(); //======================================================================| // VSA Signal generation | //======================================================================| _SECTION_BEGIN("Signal Generation"); upThrustBar = wideRangeBar AND downClose AND trendShortTerm>0 AND H>Ref(H,-1);//WRB and UHS and Fresh Ground nut = wideRangeBar AND downClose AND freshGndHi AND HighVolume;// NEW SIGNAL bc = wideRangeBar AND aboveclose AND V == HHV(V,60) AND upmajor==1;// NEW SIGNAL upThrustBartrue = wideRangeBar AND downClose AND upmajor>0 AND H>Ref(H,-1);//occurs after a major uptrend upThrustTHV = upThrustBartrue AND (VolPos == 2 OR VolPos == 1); upThrustCond1 = Ref(upThrustBar,-1) AND downBar ; upThrustCond2 = Ref(upThrustBar,-1) AND downBar AND VolPos == 2; upThrustCond3 = upThrustBar AND VolPos ==1; topRevBar = Ref(V,-1)>volAvg AND Ref(upBar,-1) AND Ref(wideRangeBar,-1) AND downBar AND downClose AND wideRangeBar AND trendLongTerm>0 AND H==HHV(H,10); PseudoUpThrust = Ref(upBar,-1) AND Ref(V,-1)>1.5*volAvg AND downBar AND downClose AND NOT upThrustBar; pseudoUtCond = Ref(PseudoUpThrust,-1) AND downBar AND downClose AND NOT upThrustBar; trendChange = Ref(upBar,-1) AND H==HHV(H,5)AND downBar AND (downClose OR midClose) AND V>volAvg AND NOT wideRangeBar AND NOT PseudoUpThrust ; sellCond1 = (upThrustCond1 OR upThrustCond2 OR upThrustCond3) ; sellCond2 = Ref(sellCond1,-1)==0; sellCond = sellCond1 AND sellCond2; strengthDown0 = trendLongTerm<0 AND V>Ref(V,-1) AND Ref(downBar,-1) AND upBar AND (upClose OR midClose) AND trendShortTerm<0 AND trendMediumTerm<0;// strength after a long down trend strengthDown = V>Ref(V,-1) AND Ref(downBar,-1) AND upBar AND (upclose OR midClose) AND trendShortTerm<0 AND trendMediumTerm<0;// Strength after a down trend strengthDown1 = trendLongTerm<0 AND V>(volAvg*1.5) AND Ref(downBar,-1) AND upBar AND (upClose OR midClose)AND trendShortTerm<0 AND trendMediumTerm<0;//Strength after downtrend . High volume strengthDown2 = trendShortTerm<0 AND Ref(V,-1)<volAvg AND upBar AND veryHighClose AND V>volAvg; buyCond1 = strengthDown OR strengthDown1; buyCond = upBar AND Ref(buyCond1,-1); stopVolume = L==LLV(L,5) AND (upClose OR midClose) AND V>1.5*volAvg AND trendLongTerm<0; bullBar = (V>volAvg OR V>Ref(V,-1)) AND closePosition <2 AND upBar ; bearBar = vb AND downClose AND downBar AND spread>avgSpread; noDemandBar = upBar AND narrowRangeBar AND lowVolume AND belowClose ; strengthUp = trendShortTerm>0 AND trendLongTerm<0 AND upBar AND V>Ref(V,-1) AND V>Ref(V,-2) AND upClose; strengthBar = trendLongTerm>0 AND upBar AND V>Ref(V,-1) AND V>Ref(V,-2) AND upClose; weakBar = trendLongTerm>0 AND trendShortTerm>0 AND spread>avgSpread AND veryLowClose; weakUp = Ref(upBar,-1)AND Ref(wideRangeBar,-1)AND Ref(V,-1)>(2*volAvg) AND downBar AND V<Ref(V,-1) AND trendShortTerm>0; noSupplyBar = downBar AND narrowRangeBar AND lowVolume AND belowClose ; revUpThrust = trendLongTerm<0 AND upBar AND upClose AND V>Ref(V,-1) AND V>volAvg AND wideRangeBar AND Ref(downBar,-1) AND Ref(downClose,-1); noBuyPress = C>Ref(C,-1) AND lowVolume AND narrowRangeBar AND aboveClose; ownerTransfer = wideRangeBar AND V>(1.5*volAvg)AND midClose; interSupport = trendShortTerm<0 AND trendLongTerm>0 AND upBar AND L<Ref(L,-1) AND L<Ref(L,-2) AND upClose; confirmWeak = Ref(topRevBar,-1) AND downBar AND V>Ref(V,-1) AND downClose; testbar = L==LLV(L,5) AND upClose AND lowVolume; testBar1 = L==LLV(L,5) AND upClose AND wideRangeBar AND trendLongTerm<0 AND trendMediumTerm<0 AND lowVolume ; lowVolTest = lowVolume AND L<Ref(L,-1) AND upClose; lowVolTest1 = V<volAvg AND L<Ref(L,-1) AND upClose AND trendLongTerm>0 AND trendMediumTerm>0 AND wideRangeBar; lowVolTest2 = Ref(lowVolTest,-1) AND upBar AND upClose; confirmStrength = Ref(lowVolTest,-1) AND upBar AND V>Ref(V,-1) AND upClose AND trendShortTerm<0; distributeBar = V>2*volAvg AND downClose AND upBar AND trendShortTerm>0 AND trendMediumTerm>0 AND NOT sellCond1 AND NOT upThrustBar; confirmWeak1 = Ref(pseudoUtCond,-1) AND L<Ref(L,-1); effortUp = H>Ref(H,-1) AND L>Ref(L,-1) AND C>Ref(C,-1) AND C>=((H-L)*0.7+L) AND spread>avgSpread AND V>Ref(V,-1);//AND O<=((H-L)*0.3+L) effortUpfail = Ref(effortUp,-1) AND (upThrustBar OR upThrustCond1 OR upThrustCond2 OR upThrustCond3); effortDown = H<Ref(H,-1) AND L<Ref(L,-1) AND C<Ref(C,-1) AND C<=((H-L)*0.25+L) AND spread>avgSpread AND V>Ref(V,-1);//O>=((H-L)*0.75+L) AND _SECTION_END(); //|============================================================================================| //| TITLE | //|============================================================================================| _SECTION_BEGIN("Title"); if( Status("action") == actionIndicator ) ( Title = Title + "\n" +EncodeColor(colorWhite)+ "Volume= "+WriteVal(V, 1.0)+" "+EncodeColor(colorYellow)+ WriteIf (upThrustBartrue, " An Upthrust Bar after upmove. A Sure sign of weakness. ","")+ WriteIf (upThrustBar AND NOT upThrustBartrue, " An Upthrust Bar. A sign of weakness. ","")+ WriteIf (upThrustCond1, " A downbar after an Upthrust. Confirm weakness. ","")+ WriteIf (upThrustCond2 AND NOT upThrustCond1, " A High Volume downbar after an Upthrust. Confirm weakness.","")+ WriteIf (upThrustCond3, "This upthrust at very High Voume, Confirms weakness","")+ WriteIf (strengthDown1, "Strength seen returning after a down trend. High volume adds to strength. ","")+ WriteIf (strengthDown0 AND NOT strengthDown, "Strength seen returning after a down trend. ","")+ WriteIf (strengthDown AND NOT strengthDown1, "Strength seen returning after a down trend. ","")+ WriteIf (lowVolTest, "Test for supply. ","")+ WriteIf (lowVolTest2, "An upBar closing near High after a Test confirms strength. ","")+ WriteIf (buyCond, "An upBar closing near High. Confirms return of Strength. ","")+ WriteIf (distributeBar, "A High Volume Up Bar closing down in a uptrend shows Distribution. ","")+ WriteIf (PseudoUpThrust, "Psuedo UpThrust. A Sign of Weakness. ","")+ WriteIf (pseudoUtCond, "A Down Bar closing down after a Pseudo Upthrust confirms weakness. ","")+ WriteIf (lowVolTest1, "Test for supply in a uptrend. Sign of Strength. ","")+ WriteIf (strengthDown2, "High volume upBar closing on the high indicates strength. ","")+ WriteIf (trendChange, "High volume Downbar after an upmove on high volume indicates weakness. ","")+ WriteIf (noDemandBar, "No Demand. A sign of Weakness. ","")+ WriteIf (noSupplyBar, "No Supply. A sign of Strength. ","")+ WriteIf (stopVolume, "Stopping volume. Normally indicates end of bearishness is nearing. ","")+ WriteIf (revUpThrust, "Reverse upthrust. Indicates strength. ","")+ WriteIf (effortUp, "Effort to Rise. Bullish sign ","")+ WriteIf (effortDown, "Effort to Fall. Bearish sign ","")+ WriteIf (effortUpfail, "Effort to Move up has failed. Bearish sign ","")+ WriteIf (bc,"Potential Buying climax","")+ ("\n Volume: ")+WriteIf(V>volAvg*2,EncodeColor(colorGreen)+"Very High",WriteIf(V>volAvg*1.3,EncodeColor(colorGreen)+ " High",WriteIf(V>volAvg,EncodeColor(colorGreen)+"Above Average", WriteIf(V<volAvg AND V>volAvg*0.7,EncodeColor(colorRed)+"Less than Average",WriteIf(V<volDnBand1,"Low","")))))+ (EncodeColor(colorYellow)+" Spread: ")+WriteIf(spread >(avgSpread*1.5),EncodeColor(colorGreen)+" Wide", WriteIf(spread>avgSpread,EncodeColor(colorGreen)+" Above Average",EncodeColor(colorRed)+WriteIf((spread < avgSpread AND spread >= (AvgSpread*0.7)),"Below Average", WriteIf(spread < AvgSpread*0.5,EncodeColor(colorRed)+"Very Narrow"," Narrow"))))+ (EncodeColor(colorYellow)+" Close: ")+WriteIf(veryHighClose,EncodeColor(colorGreen)+"Very High",WriteIf(upClose,EncodeColor(colorGreen)+"High",WriteIf(midClose,EncodeColor(colorYellow)+"Mid", WriteIf(downClose,EncodeColor(colorRed)+"Down","Very Low"))))+ EncodeColor(colorYellow)+("\n Major Trend: ")+WriteIf(upmajor==1,EncodeColor(colorGreen)+"Major Trend UP",WriteIf(upmajor== -1,EncodeColor(colorRed)+ "Major Trend Down",EncodeColor(colorYellow)+"No Trend"))+ WriteIf(upmajoroff,EncodeColor(colorRed)+" Major UpTrend Ended",WriteIf(dnmajoroff,EncodeColor(colorGreen)+" Major Down Trend Ended","" ))+ EncodeColor(colorYellow)+("\n Minor Trend: ")+WriteIf(upminor==1,EncodeColor(colorGreen)+"Minor trend up",WriteIf(dnminor==1, EncodeColor(colorRed)+"Minor Trend Down",EncodeColor(colorYellow)+"No Trend"))+ EncodeColor(colorYellow)+("\n Immediate Trend: ")+WriteIf(upimd==1,EncodeColor(colorGreen)+"Immediate trend up",WriteIf(dnimd==1, EncodeColor(colorRed)+"Immediate Trend Down",EncodeColor(colorYellow)+"No Trend"))); _SECTION_END(); //====================================================================================| // Plotting Module | //====================================================================================| _SECTION_BEGIN("Plotting"); //Bar coloring formula 1 _ Preferred - Based on VSA Strength Vscolor=IIf(lowVolTest,colorTurquoise,IIf(distributeBar,colorPink,IIf(ownerTransfer,colorDarkRed ,IIf(upThrustBar,colorYellow ,IIf(bullbar,colorLime , IIf(bearbar,colorRed,IIf(noDemandBar,colorWhite ,IIf(noSupplyBar,colorCustom12,IIf(upbar,colorGreen,IIf(downbar,colorOrange,colorBlue)))))))))); //Bar coloring formula 2 _ Based on Trend Trcolor=IIf(trendShortTerm>0 AND trendMediumTerm>0 AND trendLongTerm>0,colorLime,IIf(trendShortTerm>0 AND trendMediumTerm>0 AND trendLongTerm<0,colorGreen, IIf(trendShortTerm>0 AND trendMediumTerm<0 AND trendLongTerm<0,colorPaleGreen,IIf(trendShortTerm<0 AND trendMediumTerm<0 AND trendLongTerm<0,colorRed,IIf(trendShortTerm<0 AND trendMediumTerm>0 AND trendLongTerm>0,colorPaleGreen, IIf(trendShortTerm<0 AND trendMediumTerm<0 AND trendLongTerm>0,colorOrange,colorBlue)))))); SelectedIndicator = ParamList( "Chart Coloring", "VSA Based,Trend Based", 1 ); switch ( SelectedIndicator ) { case "VSA Based": //PlotOHLC( Open, High, Low, Close, "", VScolor, styleBar |styleThick ); break; case "Trend Based": //PlotOHLC( Open, High, Low, Close, "", Trcolor, styleBar |styleThick ); break; } //=============================== PLOT SHAPES SECTION============================ DeepAnalysis = ParamToggle("Show Deep Analysis Marks","Off|On",0); if ( DeepAnalysis == 1 ) { PlotShapes( shapeSmallDownTriangle*( upThrustBar ) , colorRed, 0, H, -20 ); PlotShapes( shapeHollowSmallDownTriangle*( upThrustBar ) , colorYellow, 0, H, -20 ); PlotShapes( shapeSmallCircle*topRevBar, colorBlue, 0, H, 20 ); PlotShapes( shapeSmallDownTriangle*sellCond, colorRed, 0, H, -20 ); PlotShapes( shapeSmallSquare*strengthDown, colorLime, 0, L, -20 ); PlotShapes( shapeSmallSquare*strengthDown1, colorLime, 0, L, -20 ); PlotShapes( shapeSmallSquare*lowVolTest1, colorLime, 0, L, -20 ); PlotShapes( shapeSmallUpTriangle*lowVolTest2, colorYellow, 0, L, -20 ); PlotShapes( shapeHollowSmallCircle*stopVolume, colorLime, 0, L, -10 ); PlotShapes( shapeSmallUpTriangle*buyCond, colorLime, 0, L, -20 ); PlotShapes( shapeSmallSquare*( PseudoUpThrust ) , colorBlue, 0, H, 10 ); PlotShapes( shapeSmallDownTriangle*( pseudoUtCond ) , colorBlue, 0, H, -20 ); PlotShapes( shapeSmallDownTriangle*trendChange , colorYellow, 0, H, -20 ); PlotShapes( shapeSmallUpTriangle*strengthDown2, colorAqua, 0, L, -20 ); PlotShapes( shapeSmallSquare*( distributeBar ) , colorBlue, 0, H, 10 ); PlotShapes( shapeSmallSquare*noDemandBar, colorCustom12, 0, H, 10 ); PlotShapes( shapeSmallSquare*( confirmWeak1 ), colorWhite, 0, L, -10 ); PlotShapes( shapeSmallCircle*noSupplyBar, colorLime, 0, L, -20 ); PlotShapes( shapeSmallCircle*effortUp, colorTurquoise, 0, midprice, 0 ); PlotShapes( shapeSmallCircle*effortDown, colorYellow, 0, midprice, 0 ); PlotShapes( shapeSmallSquare*revUpThrust, colorYellow, 0, L, -20 ); PlotShapes( shapeHollowSmallCircle*ownerTransfer, colorRed, 0, midprice, 0 ); PlotShapes( shapeSmallSquare*lowVolTest, colorCustom12, 0, L, -20 ); PlotShapes( shapeSmallSquare*( upThrustBartrue AND NOT sellCond ) , colorWhite, 0, H, 10 ); PlotShapes( shapeSmallDownTriangle*( nut ) , colorLime, 0, H, -40 ); PlotShapes( shapeSmallDownTriangle*( bc ) , colorDarkRed, 0, H, -20 ); PlotShapes( shapeHollowSmallDownTriangle*( bc ) , colorYellow, 0, H, -20 ); } _SECTION_END(); //====================================================================================| // Commentry Module | //====================================================================================| _SECTION_BEGIN("Commentary"); Vpc= upThrustBartrue OR upThrustCond1 OR upThrustCond2 OR upThrustCond3 OR strengthDown0 OR strengthDown1 OR strengthDown2 OR strengthDown OR lowVolTest1 OR pseudoUtCond OR lowVolTest2 OR PseudoUpThrust OR pseudoUtCond OR noDemandBar OR stopVolume OR trendChange OR buyCond OR noSupplyBar; if( Status("action") == actionCommentary ) printf ( "==================== Volume Price Analysis V.3.0 ====================\n"); printf ( Name() + " - " + Interval(2) + " - " + Date() + " - " + "\n" + StrFormat("High %g \nLow %g \nOpen %g \nClose %g \nVolume %g ", H, L, O, C, V)); WriteIf(Vpc,"====================\nVolume Analysis Commentary:",""); WriteIf(upThrustBartrue , "\nUp-thrusts are designed to catch stops and to mislead as many traders as possible. " + "They are normally seen after there has been weakness in the background. The market makers know that the " + "market is weak, so the price is marked up to catch stops, encourage traders to go long in a weak market, " + "AND panic traders that are already Short into covering their very good position.","") + WriteIf(upThrustCond3,"\n This upthrust bar is at high volume. This is a sure sign of weakness. One may even seriously " + "consider ending the Longs AND be ready to reverse","") + WriteIf(upThrustBartrue OR upThrustCond3,"\nAlso note that A wide spread " + "down-bar that appears immediately after any up-thrust, tends to confirm the weakness (the market makers are " + "locking in traders into poor positions). With the appearance of an upthrust you should " + "certainly be paying attention to your trade AND your stops. On many upthrusts you will find that the market will " + "'test' almost immediately.","") + WriteIf(upThrustCond1, "\nA wide spread down bar following a Upthrust Bar. " + "This confirms weakness. The Smart Money is locking in Traders into poor positions",""); WriteIf(upThrustCond2 , "\nAlso here the volume is high( Above Average).This is a sure sign of weakness. The Smart Money is " + "locking in Traders into poor positions","") + WriteIf(strengthDown, "\nStrength Bar. The stock has been in a down Trend. An upbar " + "with higher Volume closing near the High is a sign of strength returning. The downtrend is likely to reverse soon. ","") + WriteIf(strengthDown1,"\nHere the volume is very much above average. This makes this indication more stronger. ","") + WriteIf(buyCond,"\nThe previous bar saw strength coming back. This upbar confirms strength. ","") + WriteIf(PseudoUpThrust,"\nA pseudo Upthrust. This normally appears after an Up Bar with above average volume. This looks like an upthrust bar " + "closing down near the Low. But the Volume is normally Lower than average. this is a sign of weakness.If the Volume is High then weakness " + "increases. Smart Money is trying to trap the retailers into bad position. ","") + WriteIf(pseudoUtCond, "\nA downbar after a pseudo Upthrust Confirms weakness. If the volume is above average the weakness is increased. ","") + WriteIf(lowVolTest1,"\nThe previous bar was a successful Test of supply. The current bar is a upbar with higher volume. This confirms strength","") + WriteIf(distributeBar,"\nA wide range, high volume bar in a up trend closing down is an indication the Distribution is in progress. " + "The smart money is Selling the stock to the late Comers rushing to Buy the stock NOT to be Left Out Of a Bullish move. ","") + WriteIf(lowVolTest2,"\nThe previous bar was a successful Test of supply. The current bar is a upbar with higher volume. This confirms strength","") + WriteIf(trendChange,"\nThe stock has been moving up on high volume. The current bar is a Downbar with high volume. Indicates weakness and probably end of the up move","") + WriteIf(effortUp,"\nEffort to Rise bar. This normally found in the beginning of a Markup Phase and is bullish sign. " + "These may be found at the top of an Upmove as the Smart money makes a last effort to move the price to the maximum","") + WriteIf(effortDown,"\nEffort to Fall bar. This normally found in the beginning of a Markdown phase.","") + WriteIf(noSupplyBar,"\nNo Supply. A no supply bar indicates supply has been removed and the Smart money can markup the price. It is better to wait for confirmation","") + WriteIf(stopVolume,"\nStopping Volume. This will be an downbar during a bearish period closing towards the Top accompanied by High volume. " + "A stopping Volume normally indicates that smart money is absorbing the supply which is a Indication that they are Bullishon the MArket. " + "Hence we Can expect a reversal in the down trend. ","") + WriteIf(noDemandBar, "\nNo Demand Brief Description: \n Any up bar which closes in the middle OR Low, especially if the Volume has fallen off, is a potential sign of weakness. " + "Things to Look Out for: \n if the market is still strong, you will normally see signs of strength in the next few bars, which will most probably show itself as a: " + "* Down bar with a narrow spread, closing in the middle OR High. * Down bar on Low Volume.",""); _SECTION_END(); //====================================================================================| // Support & Resistance Lines | //====================================================================================| _SECTION_BEGIN("RS Lines"); // AFL By Karthikmarar // RESISTANCE AND SUPPORT LINES AFL VERSION 2.00 // Provids upto total 20 lines. Two Adjustable Parameters. 1) Sensitivity and 2) Number of lines // Depending on the Share Volatility, the Sensitivity Factor can be adjusted // Support Lines are colored Blue and Resistance Line are colored Red. SetChartOptions(0,chartShowArrows|chartShowDates); sr=ParamToggle("Plot Supp/Res lines","No|Yes" ,0); Per=Param("Sensitivity",6,2,15,1); g=Param("No.of Lines",5,1,10,1); x=Cum(1); Pk1=PeakBars(H,per,1)== 0; Tk1=TroughBars(L,per,1)== 0; //peak detection px1=LastValue(ValueWhen(pk1,x,1)); px2=LastValue(ValueWhen(Pk1,x,2)); px3=LastValue(ValueWhen(Pk1,x,3)); px4=LastValue(ValueWhen(pk1,x,4)); px5=LastValue(ValueWhen(Pk1,x,5)); px6=LastValue(ValueWhen(Pk1,x,6)); px7=LastValue(ValueWhen(pk1,x,7)); px8=LastValue(ValueWhen(Pk1,x,8)); px9=LastValue(ValueWhen(Pk1,x,9)); px10=LastValue(ValueWhen(Pk1,x,10)); //Trough Detection tx1=LastValue(ValueWhen(Tk1,x,1)); tx2=LastValue(ValueWhen(Tk1,x,2)); tx3=LastValue(ValueWhen(Tk1,x,3)); tx4=LastValue(ValueWhen(Tk1,x,4)); tx5=LastValue(ValueWhen(Tk1,x,5)); tx6=LastValue(ValueWhen(Tk1,x,6)); tx7=LastValue(ValueWhen(Tk1,x,7)); tx8=LastValue(ValueWhen(Tk1,x,8)); tx9=LastValue(ValueWhen(Tk1,x,9)); tx10=LastValue(ValueWhen(Pk1,x,10)); //values when Peaks occured XT1 =LastValue(ValueWhen(pk1,H,1)); XT2 =LastValue(ValueWhen(Pk1,H,2)); XT3 =LastValue(ValueWhen(Pk1,H,3)); XT4 =LastValue(ValueWhen(pk1,H,4)); XT5 =LastValue(ValueWhen(Pk1,H,5)); XT6 =LastValue(ValueWhen(Pk1,H,6)); XT7 =LastValue(ValueWhen(pk1,H,7)); XT8 =LastValue(ValueWhen(Pk1,H,8)); XT9 =LastValue(ValueWhen(Pk1,H,10)); XT10 =LastValue(ValueWhen(Pk1,H,10)); //Value when troughs occured YT1 =LastValue(ValueWhen(tk1,L,1)); YT2 =LastValue(ValueWhen(tk1,L,2)); YT3 =LastValue(ValueWhen(tk1,L,3)); YT4 =LastValue(ValueWhen(tk1,L,4)); YT5 =LastValue(ValueWhen(tk1,L,5)); YT6 =LastValue(ValueWhen(tk1,L,6)); YT7 =LastValue(ValueWhen(tk1,L,7)); YT8 =LastValue(ValueWhen(tk1,L,8)); YT9 =LastValue(ValueWhen(tk1,L,10)); YT10 =LastValue(ValueWhen(tk1,L,10)); LastBar = Cum(1) == LastValue(Cum(1)); //plot peak lines Plot(IIf(x>px1 AND g>=1 AND sr,XT1,Null),"P1",IIf( LastValue(C)>XT1, colorBlue, colorRed )); Plot(IIf(x>px2 AND g>=2 AND sr,XT2,Null),"P2",IIf( LastValue(C)>XT2, colorBlue, colorRed )); Plot(IIf(x>px3 AND g>=3 AND sr,XT3,Null),"P3",IIf( LastValue(C)>XT3, colorBlue, colorRed )); Plot(IIf(x>px4 AND g>=4 AND sr,XT4,Null),"P4",IIf( LastValue(C)>XT4, colorBlue, colorRed )); Plot(IIf(x>px5 AND g>=5 AND sr,XT5,Null),"P5",IIf( LastValue(C)>XT5, colorBlue, colorRed )); Plot(IIf(x>px6 AND g>=6 AND sr,XT6,Null),"P6",IIf( LastValue(C)>XT6, colorBlue, colorRed )); Plot(IIf(x>px7 AND g>=7 AND sr,XT7,Null),"P7",IIf( LastValue(C)>XT7, colorBlue, colorRed )); Plot(IIf(x>px8 AND g>=8 AND sr,XT8,Null),"P8",IIf( LastValue(C)>XT8, colorBlue, colorRed )); Plot(IIf(x>px9 AND g>=9 AND sr,XT9,Null),"P9",IIf( LastValue(C)>XT9, colorBlue, colorRed )); Plot(IIf(x>px10 AND g>=10 AND sr,XT10,Null),"P10",IIf( LastValue(C)>XT10, colorBlue, colorRed )); //plot Trough lines Plot(IIf(x>tx1 AND g>=1 AND sr,YT1,Null),"T1",IIf( LastValue(C)>YT1, colorBlue, colorRed )); Plot(IIf(x>tx2 AND g>=2 AND sr,YT2,Null),"T2",IIf( LastValue(C)>YT2, colorBlue, colorRed )); Plot(IIf(x>tx3 AND g>=3 AND sr,YT3,Null),"T3",IIf( LastValue(C)>YT3, colorBlue, colorRed )); Plot(IIf(x>tx4 AND g>=4 AND sr,YT4,Null),"T4",IIf( LastValue(C)>YT4, colorBlue, colorRed )); Plot(IIf(x>tx5 AND g>=5 AND sr,YT5,Null),"T5",IIf( LastValue(C)>YT5, colorBlue, colorRed )); Plot(IIf(x>tx6 AND g>=6 AND sr,YT6,Null),"T6",IIf( LastValue(C)>YT6, colorBlue, colorRed )); Plot(IIf(x>tx7 AND g>=7 AND sr,YT7,Null),"T7",IIf( LastValue(C)>YT7, colorBlue, colorRed )); Plot(IIf(x>tx8 AND g>=8 AND sr,YT8,Null),"T8",IIf( LastValue(C)>YT8, colorBlue, colorRed )); Plot(IIf(x>tx9 AND g>=9 AND sr,YT9,Null),"T9",IIf( LastValue(C)>YT9, colorBlue, colorRed )); Plot(IIf(x>tx10 AND g>=10 AND sr,YT10,Null),"T10",IIf( LastValue(C)>YT10, colorBlue, colorRed )); //Crossing Resistance Lines xt1c=Cross(C,xt1); xt2c=Cross(C,xt2); xt3c=Cross(C,xt3); xt4c=Cross(C,xt4); xt5c=Cross(C,xt5); xt6c=Cross(C,xt6); xt7c=Cross(C,xt7); xt8c=Cross(C,xt8); xt9c=Cross(C,xt9); xt10c=Cross(C,xt10); //Breaking support Lines yt1c=Cross(yt1,C); yt2c=Cross(yt2,C); yt3c=Cross(yt3,C); yt4c=Cross(yt4,C); yt5c=Cross(yt5,C); yt6c=Cross(yt6,C); yt7c=Cross(yt7,C); yt8c=Cross(yt8,C); yt9c=Cross(yt9,C); yt10c=Cross(yt10,C); //Resistance approaching ax1=C<xt1 AND C>xt1*0.97; ax2=C<xt2 AND C>xt2*0.97; ax3=C<xt3 AND C>xt3*0.97; ax4=C<xt4 AND C>xt4*0.97; ax5=C<xt5 AND C>xt5*0.97; ax6=C<xt6 AND C>xt6*0.97; ax7=C<xt7 AND C>xt7*0.97; ax8=C<xt8 AND C>xt8*0.97; ax9=C<xt9 AND C>xt9*0.97; ax10=C<xt10 AND C>xt10*0.97; //Support approaching ay1=C>yt1 AND C<yt1*1.03; ay2=C>yt2 AND C<yt2*1.03; ay3=C>yt3 AND C<yt3*1.03; ay4=C>yt4 AND C<yt4*1.03; ay5=C>yt5 AND C<yt5*1.03; ay6=C>yt6 AND C<yt6*1.03; ay7=C>yt7 AND C<yt7*1.03; ay8=C>yt8 AND C<yt8*1.03; ay9=C>yt9 AND C<yt9*1.03; ay10=C>yt10 AND C<yt10*1.03; //Resistance lines commentary src1=xt1c OR xt2c OR xt3c OR xt4c OR xt5c OR xt6c OR xt7c OR xt8c OR xt9c OR xt10c OR yt1c OR yt2c OR yt3c OR yt4c OR yt5c OR yt6c OR yt7c OR yt8c OR yt9c OR yt10c; src2=ax1 OR ax2 OR ax3 OR ax4 OR ax5 OR ax6 OR ax7 OR ax8 OR ax9 OR ax10 OR ay1 OR ay2 OR ay3 OR ay4 OR ay5 OR ay6 OR ay7 OR ay8 OR ay9 OR ay10; WriteIf(src1 OR src2,"------------------------------------------",""); WriteIf(src1 OR src2,"SUPPORT/RESISTANCE COMMENTARY:\n",""); WriteIf(xt1c AND V>volAvg,"Resistance at "+xt1+" crossed with high volume.Bullish.", WriteIf(xt1c AND V<volAvg,"Resistance at "+xt1+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt2c AND V>volAvg,"Resistance at "+xt2+" crossed with high volume.Bullish.", WriteIf(xt2c AND V<volAvg,"Resistance at "+xt2+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt3c AND V>volAvg,"Resistance at "+xt3+" crossed with high volume.Bullish.", WriteIf(xt3c AND V<volAvg,"Resistance at "+xt3+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt4c AND V>volAvg,"Resistance at "+xt4+" crossed with high volume.Bullish.", WriteIf(xt4c AND V<volAvg,"Resistance at "+xt4+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt5c AND V>volAvg,"Resistance at "+xt5+" crossed with high volume.Bullish.", WriteIf(xt5c AND V<volAvg,"Resistance at "+xt5+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt6c AND V>volAvg,"Resistance at "+xt6+" crossed with high volume.Bullish.", WriteIf(xt6c AND V<volAvg,"Resistance at "+xt6+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt7c AND V>volAvg,"Resistance at "+xt7+" crossed with high volume.Bullish.", WriteIf(xt7c AND V<volAvg,"Resistance at "+xt7+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt8c AND V>volAvg,"Resistance at "+xt8+" crossed with high volume.Bullish.", WriteIf(xt8c AND V<volAvg,"Resistance at "+xt8+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt9c AND V>volAvg,"Resistance at "+xt9+" crossed with high volume.Bullish.", WriteIf(xt9c AND V<volAvg,"Resistance at "+xt9+" crossed, but volume is less. caution adviced."," "))+ WriteIf(xt10c AND V>volAvg,"Resistance at "+xt10+" crossed with High Volume.Bullish.", WriteIf(xt10c AND V<volAvg,"Resistance at "+xt10+" crossed, but volume is less. caution adviced."," ")); //Support line breaks Commentary WriteIf(yt1c AND V>volAvg,"Support at "+yt1+" is broken with high volume.Bearish.", WriteIf(yt1c AND V<volAvg,"Support at "+yt1+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt2c AND V>volAvg,"Support at "+yt2+" is broken with high volume.Bearish.", WriteIf(yt2c AND V<volAvg,"Support at "+yt2+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt3c AND V>volAvg,"Support at "+yt3+" is broken with high volume.Bearish.", WriteIf(yt3c AND V<volAvg,"Support at "+yt3+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt4c AND V>volAvg,"Support at "+yt4+" is broken with high volume.Bearish.", WriteIf(yt4c AND V<volAvg,"Support at "+yt4+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt5c AND V>volAvg,"Support at "+yt5+" is broken with high volume.Bearish.", WriteIf(yt5c AND V<volAvg,"Support at "+yt5+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt6c AND V>volAvg,"Support at "+yt6+" is broken with high volume.Bearish.", WriteIf(yt6c AND V<volAvg,"Support at "+yt6+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt7c AND V>volAvg,"Support at "+yt7+" is broken with high volume.Bearish.", WriteIf(yt7c AND V<volAvg,"Support at "+yt7+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt8c AND V>volAvg,"Support at "+yt8+" is broken with high volume.Bearish.", WriteIf(yt8c AND V<volAvg,"Support at "+yt8+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt9c AND V>volAvg,"Support at "+yt9+" is broken with high volume.Bearish.", WriteIf(yt9c AND V<volAvg,"Support at "+yt9+" is broken, but volume is less. caution adviced."," "))+ WriteIf(yt10c AND V>volAvg,"Support at "+yt10+" is broken with high volume.Bearish.", WriteIf(yt10c AND V<volAvg,"Support at "+yt10+" is broken, but volume is less. caution adviced."," ")); //Resistance approaching Commentary WriteIf(ax1 AND tls>0, "Price Approaching resistance at "+xt1+ ". ","")+ WriteIf(ax2 AND tls>0, "Price Approaching resistance at "+xt2+ ". ","")+ WriteIf(ax3 AND tls>0, "Price Approaching resistance at "+xt3+ ". ","")+ WriteIf(ax4 AND tls>0, "Price Approaching resistance at "+xt4+ ". ","")+ WriteIf(ax5 AND tls>0, "Price Approaching resistance at "+xt5+ ". ","")+ WriteIf(ax6 AND tls>0, "Price Approaching resistance at "+xt6+ ". ","")+ WriteIf(ax7 AND tls>0, "Price Approaching resistance at "+xt7+ ". ","")+ WriteIf(ax8 AND tls>0, "Price Approaching resistance at "+xt8+ ". ","")+ WriteIf(ax9 AND tls>0, "Price Approaching resistance at "+xt9+ ". ","")+ WriteIf(ax10 AND tls>0, "Price Approaching resistance at "+xt10+ ". ",""); WriteIf(ay1 AND tls<0, "Price Approaching Support at "+yt1+ ". ","")+ WriteIf(ay2 AND tls<0, "Price Approaching Support at "+yt2+ ". ","")+ WriteIf(ay3 AND tls<0, "Price Approaching Support at "+yt3+ ". ","")+ WriteIf(ay4 AND tls<0, "Price Approaching Support at "+yt4+ ". ","")+ WriteIf(ay5 AND tls<0, "Price Approaching Support at "+yt5+ ". ","")+ WriteIf(ay6 AND tls<0, "Price Approaching Support at "+yt6+ ". ","")+ WriteIf(ay7 AND tls<0, "Price Approaching Support at "+yt7+ ". ","")+ WriteIf(ay8 AND tls<0, "Price Approaching Support at "+yt8+ ". ","")+ WriteIf(ay9 AND tls<0, "Price Approaching Support at "+yt9+ ". ","")+ WriteIf(ay10 AND tls<0, "Price Approaching Support at "+yt10+ ". ",""); _SECTION_END(); //==========================================================================| // Volume Lines Module | //==========================================================================| // AFL Karthikmarar // HIGH VOLUME LINES AFL VERSION 1.00 // Provids upto total 20 lines. Number of lines Adjustable from Parameter window _SECTION_BEGIN("High Volume Lines"); vr=ParamToggle("Plot High volume lines","No|Yes" ,0); j=Param("No.of High vol Lines",5,1,20,1); k=Param("Volume factor",2,1.5,3,0.5); y=Cum(1); Hk1=V>k*volAvg; //High volume detection hx1=LastValue(ValueWhen(hk1,y,1)); hx2=LastValue(ValueWhen(hk1,y,2)); hx3=LastValue(ValueWhen(hk1,y,3)); hx4=LastValue(ValueWhen(hk1,y,4)); hx5=LastValue(ValueWhen(hk1,y,5)); hx6=LastValue(ValueWhen(hk1,y,6)); hx7=LastValue(ValueWhen(hk1,y,7)); hx8=LastValue(ValueWhen(hk1,y,8)); hx9=LastValue(ValueWhen(hk1,y,9)); hx10=LastValue(ValueWhen(hk1,y,10)); hx11=LastValue(ValueWhen(hk1,y,11)); hx12=LastValue(ValueWhen(hk1,y,12)); hx13=LastValue(ValueWhen(hk1,y,13)); hx14=LastValue(ValueWhen(hk1,y,14)); hx15=LastValue(ValueWhen(hk1,y,15)); hx16=LastValue(ValueWhen(hk1,y,16)); hx17=LastValue(ValueWhen(hk1,y,17)); hx18=LastValue(ValueWhen(hk1,y,18)); hx19=LastValue(ValueWhen(hk1,y,19)); hx20=LastValue(ValueWhen(hk1,y,20)); //values when High volume occured XV1 =LastValue(ValueWhen(hk1,H,1)); XV2 =LastValue(ValueWhen(hk1,H,2)); XV3 =LastValue(ValueWhen(hk1,H,3)); XV4 =LastValue(ValueWhen(hk1,H,4)); XV5 =LastValue(ValueWhen(hk1,H,5)); XV6 =LastValue(ValueWhen(hk1,H,6)); XV7 =LastValue(ValueWhen(hk1,H,7)); XV8 =LastValue(ValueWhen(hk1,H,8)); XV9 =LastValue(ValueWhen(hk1,H,9)); XV10 =LastValue(ValueWhen(hk1,H,10)); XV11 =LastValue(ValueWhen(hk1,C,11)); XV12 =LastValue(ValueWhen(hk1,C,12)); XV13 =LastValue(ValueWhen(hk1,C,113)); XV14 =LastValue(ValueWhen(hk1,C,14)); XV15 =LastValue(ValueWhen(hk1,C,15)); XV16 =LastValue(ValueWhen(hk1,C,16)); XV17 =LastValue(ValueWhen(hk1,C,17)); XV18 =LastValue(ValueWhen(hk1,C,18)); XV19 =LastValue(ValueWhen(hk1,C,19)); XV20 =LastValue(ValueWhen(hk1,C,20)); LastBar = Cum(1) == LastValue(Cum(1)); //plot High Volume lines Plot(IIf(y>hx1 AND j>=1 AND Vr,xv1,Null),"v1",colorYellow); Plot(IIf(y>hx2 AND j>=2 AND Vr,xv2,Null),"v2",colorYellow); Plot(IIf(y>hx3 AND j>=3 AND Vr,xv3,Null),"v3",colorYellow); Plot(IIf(y>hx4 AND j>=4 AND Vr,xv4,Null),"v4",colorYellow); Plot(IIf(y>hx5 AND j>=5 AND Vr,xv5,Null),"v5",colorYellow); Plot(IIf(y>hx6 AND j>=6 AND Vr,xv6,Null),"v6",colorYellow); Plot(IIf(y>hx7 AND j>=7 AND Vr,xv7,Null),"v7",colorYellow); Plot(IIf(y>hx8 AND j>=8 AND Vr,xv8,Null),"v8",colorYellow); Plot(IIf(y>hx9 AND j>=9 AND Vr,xv9,Null),"v9",colorYellow); Plot(IIf(y>hx10 AND j>=10 AND Vr,xv10,Null),"v10",colorYellow); Plot(IIf(y>hx11 AND j>=11 AND Vr,xv11,Null),"v11",colorYellow); Plot(IIf(y>hx12 AND j>=12 AND Vr,xv12,Null),"v12",colorYellow); Plot(IIf(y>hx13 AND j>=13 AND Vr,xv13,Null),"v13",colorYellow); Plot(IIf(y>hx14 AND j>=14 AND Vr,xv14,Null),"v14",colorYellow); Plot(IIf(y>hx15 AND j>=15 AND Vr,xv15,Null),"v15",colorYellow); Plot(IIf(y>hx16 AND j>=16 AND Vr,xv16,Null),"v16",colorYellow); Plot(IIf(y>hx17 AND j>=17 AND Vr,xv17,Null),"v17",colorYellow); Plot(IIf(y>hx18 AND j>=18 AND Vr,xv18,Null),"v18",colorYellow); Plot(IIf(y>hx19 AND j>=19 AND Vr,xv19,Null),"v19",colorYellow); Plot(IIf(y>hx20 AND j>=20 AND Vr,xv20,Null),"v20",colorYellow); _SECTION_END(); ///////////////////////////// // Supertrend - Translated from Kolier MQ4 // see: http://kolier.li/indicator/kolier-supertrend-indi // translation in Amibroker AFL code by E.M.Pottasch, 2011 procedure calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice) { global buffer_line_down; global buffer_line_up; buffer_line_down = Null; buffer_line_up = Null; PHASE_NONE = 0; PHASE_BUY = 1; PHASE_SELL = -1; phase=PHASE_NONE; band_upper = 0;band_lower = 0; for(i = ATR_Period + 1; i < BarCount; i++) { band_upper = CalcPrice[i] + ATR_Multiplier * tr[i]; band_lower = CalcPrice[i] - ATR_Multiplier * tr[i]; if(phase==PHASE_NONE) { buffer_line_up[i] = CalcPrice[i]; buffer_line_down[i] = CalcPrice[i]; } if(phase!=PHASE_BUY && Close[i]>buffer_line_down[i-1] && !IsEmpty(buffer_line_down[i-1])) { phase = PHASE_BUY; buffer_line_up[i] = band_lower; buffer_line_up[i-1] = buffer_line_down[i-1]; } if(phase!=PHASE_SELL && Close[i]<buffer_line_up[i-1] && !IsEmpty(buffer_line_up[i-1])) { phase = PHASE_SELL; buffer_line_down[i] = band_upper; buffer_line_down[i-1] = buffer_line_up[i-1]; } if(phase==PHASE_BUY && ((TrendMode==0 && !IsEmpty(buffer_line_up[i-2])) || TrendMode==1) ) { if(band_lower>buffer_line_up[i-1]) { buffer_line_up[i] = band_lower; } else { buffer_line_up[i] = buffer_line_up[i-1]; } } if(phase==PHASE_SELL && ((TrendMode==0 && !IsEmpty(buffer_line_down[i-2])) || TrendMode==1) ) { if(band_upper<buffer_line_down[i-1]) { buffer_line_down[i] = band_upper; } else { buffer_line_down[i] = buffer_line_down[i-1]; } } } } SetBarsRequired(sbrAll,sbrAll); TrendMode = ParamToggle("TrendMode","Off|On",1); ATR_Multiplier = Param("ATR_Multiplier",2,0.1,10,0.1); ATR_Period = Param( "ATR_Period",5,1,20,1); tr = ATR(ATR_Period); CalcPrice = (H+L)/2; calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice); SetChartOptions(0,chartShowDates); //Plot(C,"C",colorWhite,64); if ( TrendMode == 1 ) { Plot( buffer_line_up, "\ntu", ColorRGB( 28, 134, 238 ), styleThick ); Plot( buffer_line_down, " // td", ColorRGB( 205, 51, 51 ), styleThick ); Plot( 4, "", IIf( buffer_line_up, colorBrightGreen, colorBlack ), styleOwnScale | styleArea | styleNoLabel, -0.5, 100 ); Plot( 6, "", IIf( buffer_line_down, colorRed, colorBlack ), styleOwnScale | styleArea | styleNoLabel, -0.5, 100 ); }
22 comments
Leave Comment
Please login here to leave a comment.
Back
it’s my humble request kindly post the afl screenshot
thanks
Ya sure….
I will try from next time…..
Nice cleanup of Southwind code.
why error come in this formula in my amibroker
It seems to work and display correctly in my Amibroker v 6.11ß. I do have the plug-ins for The Foundation, so they may be needed, albeit I see no calls to the code in the afl.
Att <parth.desai@hotmail.com>: May I ask, which is the starting original afl for this Southwind mod? Southwind is an author’s pseudonym, and not the name of any indicator. Maybe Southbreeze?
hi @parfumeur
No plug in is required for the modified version.
I have uploaded one more modified version of the AFL with more accurate results.
Please check it and try to analyse the formula.
@OLE
Thank you. You can try my another AFL which will perform better than this.
Parth
hello sir,
while watching it on Barreplay, i see that Signal is coming/ planted at about 4-5 bars earlier to the current bars.
please advise/ help.
pkgmtnl ,
I see the same things on bareplay signal come and dissepear.
parth.desai can you add additional rules so the buy and sell stay for
real please
Tks a lot
PARTH DESAI – MOST ACCURATE TRADING IN COMMODITIES for Amibroker (AFL)\
check this afl ….your doubts will be cleared
Future Referencing / Repainted one
error in 915 line
please provide corrected version
Parth
“Thank you. You can try my another AFL which will perform better than this.”
Can u provide link to that afl plz. Thanks
best afl forever i have seen…grt and thank u
HELLO SIR it senn the buy or sell call before 4-5 bar/candle then how actually work witg this afl can u tell me plz………i dont know how to use it plz tell me
hpatra22@gmail.com
This also repaints. check KPIT from 25.07.2016 to 11.08.2016. In this short period, buy signal repaints three times.
Hi sir
I cann’t pick to explore in amibroker. Error ln 510 col 44
Pls check
Well done. I really enjoy this AFL. Thanks for your great effort!!!
very smart AFL provided by you mr. parth desai….
Thank you
Parth sir thanks for this afl..
Accyrate signals..
But in my system only long trades are getting executed
Short not executing in backtest..
Some times signals are delayed.
Can make profit by this if know exactly how this work..
hi sir thanks for your afl code…
Tried 2 scrips on ur afl code working 100 %
signal are very accurate.
too many graphs confusing a lot but a great effort by you sir….
if stoploss is provide on left bottom screen it will be good enough.
I have seen signal sometimes getting delayed.
thank and best regards
naren.chitturi@gmail.com
Hi Parth,
Can you make Amibroker exploration for this indicator?
Regards,
Ajay